PUSH TO LOCK/EJECTWV-NP1004Network cameraOperating InstructionsModel No. WV-NP1004(Lens is option.)Before attempting to connect or operate this produ
10Major Operating Controls and Their Functions<TOP> <BOTTOM><REAR>ALC lens connectorTripod mount baseMicrophoneINITIAL SET(UP)(DOWN)
11Lens MountingMount the lens by rotating it clockwise slowly. Then, connect the lens cable to the ALC lens connector of the camera.Optional lensLens
12How to use a varifocal lensBefore adjusting the varifocal lens, reset the flange-back length position to the default position for the CS-mount (by s
13Installations/ConnectionsBefore start the installation/connection, prepare the required devices and cables.Before starting the connection, turn the
Step 6Connect an external device to the EXT I/O connector.When connecting an external device, remove 9 mm – 10mm of the outer jacket of the cable and
15[Connection example]When connecting with a PC directly<Required cable>LAN cable (category 5, cross)When connecting via a network<Required h
16Insert/Remove SD Memory CardHow to insert a SD memory cardImportant:Before inserting a SD memory card, make sure that the power of the camera is tur
17Adjust the Flange-Back LengthBefore adjusting the flange-back length, adjust the lens first. (→ page 11)Use the operation buttons on the camera (→ p
18Configure the Settings Using the Operation Buttons on the CameraEach setup item on the [Camera] tab of the "Camera setup" page can be conf
19Basic operationThe following are descriptions of how to configure each setup item on the [Camera] tab using the operation buttons on thecamera.Note:
2The serial number of this product may be found on the sur-face of the unit.You should note the serial number of this unit in the spaceprovided and re
20Camera setup page chart **SPECIAL SETUP**CHROMA GAIN ...|..160AP GAIN ...|.193PEDESTAL ...|...113HUE ...|...129
21Configure the Network SettingsBefore installing the software, read the readme file on theprovided CD-ROM first.Software included on the provided CD-
22• The power cable, AC inlet or the power plug is damaged.If you continue to use it, a fire or an electric shock may occur.Unplug the power plug imme
23Specifications● CAMERAImage sensorScanning methodEffective pixels1/3 inch interline transfer CCDFull scanning mode: 15 fps progressive scanPartial s
24● NetworkNetwork 10BASE-T/100BASE-TX, RJ45 connectorResolutionFull scanning mode JPEG: 1 280 x 960/VGA (640 x 480)/QVGA (320 x 240)MPEG-4: VGA (640
25Standard AccessoriesCD-ROM* ... 1 pc.Operating Instructions (English version) ..
Panasonic Canada Inc.5770 Ambler Drive,Mississauga,Ontario, L4W 2T3 Canada (905)624-5010http://www.panasonic.caPanasonic Sales CompanyDivision of Pana
3Important Safety Instructions1) Read these instructions.2) Keep these instructions.3) Heed all warnings.4) Follow all instructions.5) Do not use this
4Limitation of LiabilityTHIS PUBLICATION IS PROVIDED "AS IS" WITHOUT WAR-RANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED,INCLUDING BUT NOT LIMI
5CONTENTSImportant Safety Instructions ...
6PrefaceFeaturesThe network camera WV-NP1004 designed to operate using a PC on a network (10BASE-T/100BASE-TX) and equipped withthe traditional analog
7About these operating instructionsSystem requirements for a PCTrademarks and registered trademarksThere are 2 sets of operating instructions for the
Precautions8Network SecurityAs you will use this product connected to a network, your attention is called to the following security risks.1. Leakage o
9• When using an unformatted SD memory card, format itusing this camera.Recorded data on the SD memory card will be deletedwhen formatted.If using an
Comments to this Manuals