Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. No model number s
10Step 2Move the cursor to "SUPER-D5" and select the item from the following: ON (default): Activates the SUPER-D5 function all the time. (+
11When not using the SUPER-D5 functionFollowtheprocedurebelow.Step 1WhentheSUPER-D5functionissetto"OFF",brightareasofanimage
12When the SUPER-D5 function is set to "OFF": OFF (1/60) (default), 1/100, 1/250, 1/500, 1/1 000, 1/2 000, 1/4 000, and 1/10 000When the SU
13Note: If the situation meets one of the following or other, color may not be accurately reproduced. • Thesubjectismostlyhighly-colored.
14Manual fine adjustment of white balanceThe white balance is manually fine adjusted after white balance automatically adjustment in the automat
15Step 1Move the cursor to "BW MODE" and select the black-and-white control from the following: AUTO1 (default): Automatically toggles betwe
169. i-VMD setting [i-VMD]The intelligent motion detection function allows the camera to detect motion and appearance/disappearance of an ob
17Detect motion of objectsMove the cursor to "MOTION" and select from the following. ON: Provides an alarm signal when motion is detected. O
18Perform the settings relating to the detection of appearance/disappearance of stationary objectsPerform the settings relating to the detection of ap
19Set the detection areasSet the detection areas for motion detection and the detection of appearance/disappearance of stationary objects. Up to 2 det
2PrefaceAbout the user manualsThe operating instructions of the camera consist of 2 sets: these operating instructions (PDF) and Installation Guide. T
20Setting of scene change detection This function detects a change in the subject state that occurs by covering the camera with a cloth, a cap,
21Configure alarm notificationFollow the procedure below. Step 1Move the cursor to "i-VMD" and press the setting button. → The "i-VMD
22Camera system setting [SYSTEM SETUP]Performs the settings relating to the camera system such as synchronization, alarm input/output terminal, and pr
23Step 1Set "SYNC" to "LL" and press the setting button. → The "SYNC" screen appears. Step 2Connect the video output s
24Configure the settings relating to the alarm output terminalSelect the alarm output operation. Follow the procedure below. Step 1Move the cursor to
25Step 2Move the cursor to the number at the right of the title and select the zone number using the right or left button. Step 3Move the cursor to &
2614. Electronic zoom setting [EL-ZOOM]Select "On" or "Off" to determine whether or not to use the electronic zoom. When "ON&
27Back focus setting [BACK-FOCUS SETUP]Selects the back focus setting type and performs fine adjustment. The following setting can be con
28Step 3Move the cursor to "C/L ← → B/W" and select the back focus adjustment type from the following: AUTO (default): Adjusts the back f
29Special menu setting [SPECIAL SETUP]The special menu setup is performed including the setting of the camera image quality and the communication conf
3ContentsPreface ... 2About the user manuals ...
30Flaw compensation [PIX OFF]Flaws in the displayed camera image are corrected. Up to 16 points can be corrected. Follow the procedure below. Step 1M
31Communication setting [COMMUNICATION]The required communication configuration is performed to use this unit integrated into the system with a receiv
32Language selection [LANGUAGE SETUP]A language for the setup menu is selected from the following: The language selection can be made on the "LAN
33Shortcut operationUse of a system controller with the "camera function" button allows users to perform the shortcut settings with use of t
34System controller operation Setting contents[2]+[1]+[1]+[Camerafunction] Scene change ON[2]+[1]+[2]+[Camerafunction] Scene change OFF[
Panasonic System Solutions Company,Unit Company of Panasonic Corporation of North Americawww.panasonic.com/business/For customer support, call 1.800.5
4About the setup menusPerforming each setting item in the setup menu should be completed in advance to use this unit. Perform the settings for each it
5Basic operationThe description below explains how to operate the setup menu basically. The operations in the setup menu are performed with the operat
6Screen transition diagram MODEL WV-CP500 SERIESCAMERA ID OFFCAMERA SYSTEMBACK-FOCUS SPECIALLANGUAGE END SETUP ENABLE **CAMERA SETUP**
7Camera title setting [CAMERA ID]This item specifies the camera title. The camera title that indicates the camera location and other information about
8Camera operation setting [CAMERA SETUP]The following describes the camera operation settings. The following settings can be configured on
9Step 5Move the cursor to "SCENE1" and press the right or left button to select "SCENE1" to resume normal operation. Important: •
Comments to this Manuals