Panasonic DMP-BD70V User Manual download pdf (Page 17)

RQT9412

Network settings

These settings are used if you will connect this unit to the Internet.

≥

The connection to the Internet may take time or the Internet may not be

connected depending on the connection environment. (

35)

It is required that you use a broadband connection.

Preparation

≥Connect to a broadband network. (> 16)

Testing of “IP Address/DNS Settings”

Always test the connection when a LAN cable is connected.

1 Press [SETUP].

2 Press [3, 4] to select “Network”

and press [OK].

3 Press [3, 4] to select “IP Address/

DNS Settings” and press [OK].

4 Press [3, 4] to select “Connection

Test” and press [OK].

“Testing”: The test is in progress.

“Pass”: The connection is completed.

Press [RETURN] to exit.

“Fail”:

Please check the connection and settings.

(

38)

≥Please perform the “Connection Test” when any changes are made

to the “IP Address/DNS Settings”.

≥If the connection test fails, it may be necessary to set the MAC

address of this unit at the router side. The MAC address can be

displayed by pressing [SETUP] and selecting “Network”.

Setting the IP address

In most cases, default settings can normally be used without

making any changes.

Set the IP address only when the router has no DHCP server

functions or when the router’s DHCP server function is disabled.

After performing steps 1–3 (D left)

4 Press [3, 4] to select “IP Address

Auto Configuration (DHCP)” and

press [2, 1] to select “Off”.

5 Press [3, 4] to select “IP Address”,

“Subnet Mask” or “Default

Gateway” and press [OK].

6 Enter numbers with the numbered

buttons and press [OK].

7 Press [2, 1] to select “Yes” and

press [OK].

≥After checking the specifications for your broadband router, enter

each number. If the number is unknown, then check the number of

other devices such as personal computers connected via a LAN

cable. Assign a different number from those of other devices for the

“IP Address” and the same number for others.

≥If a wrong number is entered, then press [CANCEL].

≥The numeric input range is between 0 and 255.

Setting the DNS-IP

In most cases, default settings can normally be used without

making any changes.

When setting an assigned DNS server from your Internet service

provider, perform the following settings.

After performing steps 1–3 (D left)

4 Press [3, 4] to select “DNS Auto

Configuration (DHCP)” and press

[2, 1] to select “Off”.

5 Press [3, 4] to select “Primary

DNS” or “Secondary DNS”and

press [OK].

6 Enter numbers with the numbered

buttons and press [OK].

7 Press [2, 1] to select “Yes” and

press [OK].

≥Follow the instructions given by your Internet service provider and

enter the numbers. If the number is unknown, then check the

number of other devices such as personal computers connected via

a LAN cable and assign the same number.

≥If a wrong number is entered, then press [CANCEL].

≥The numeric input range is between 0 and 255.

IP Address/DNS Settings

Connection Test

㪄㪄㪄㪅㩷㪄㪄㪄㪅㩷㪄㪄㪄㪅㩷㪄㪄㪄㩷

IP Address Auto Configuration (DHCP)

IP Address

Subnet Mask

Default Gateway

DNS Auto Configuration (DHCP)

Primary DNS

Secondary DNS

Auto Detect Connection Speed

Connection Speed Setting



RETURN

Network

IP Address/DNS Settings

Proxy Server Settings

Network Service

MAC Address: xx-xx-xx-xx-xx-xx

192

Primary DNS

Please input Primary DNS and press

[OK]. Press [CANCEL] to delete the selected

character. To clear this setting, delete all

characters and press [OK].

Number

Getting started

DMP-BD70V-RQT9412_ENG.book 17 ページ２００９年２月２７日　金曜日　午後７時２３分

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 51 52

Comments to this Manuals

No comments

Panasonic DMP-BD70V User Manual Page 17

Comments to this Manuals

Related products and manuals for Blu-Ray players Panasonic DMP-BD70V