Panasonic DMPBD50 User Manual download pdf (Page 28)

RQT9185

“TV/Device Connection”

TV Aspect

Set to match the type of television connected.

When connected to a 4:3 aspect television:

≥4:3 Pan & Scan: Video recorded for a widescreen is played as Pan & Scan

(unless prohibited by the producer of the disc). When playing

BD-Video, video is output as “4:3 Letterbox”.

≥4:3 Letterbox: Video recorded for a widescreen is played in the letterbox

style.

When connected to a 16:9 widescreen television:

≥16:9

: Video recorded for 4:3 aspect screen is displayed as a 4:3

ratio image in the center of the screen.

≥16:9 full: Video recorded for 4:3 aspect screen is displayed as a

horizontally stretched 16:9 image.

HDMI Connection

≥Press [OK] to show the following settings.

HDMI Video Mode

Select “On” when video is output from HDMI AV OUT

terminal.

≥On

: Images are output from the HDMI terminal in the resolution set in “HDMI

Video Format”. Video from COMPONENT VIDEO OUT terminal is output

as “576i/480i”.

≥Off Images are output in the resolution set in “Component Resolution”.

HDMI Video Format

The items supported by the connected devices are

indicated on the screen as “¢”. When any item without

“¢” is selected, the images may be distorted.

≥Automatic

: Automatically selects the output resolution best suited to the

connected television (1080p, 1080i, 720p or 576p/480p).

≥576p/480p ≥720p

≥1080i ≥1080p

–When the unit is connected to an amplifier/receiver that does not support the

resolution set on the unit, the video cannot be output properly. In this case, use

the HDMI cable to connect the unit to the TV and then connect the unit to the

amplifier/receiver using a cable other than HDMI.

–To enjoy high definition video up-converted to 1080p, you need to connect the

unit directly to 1080p compatible HDTV (High Definition Television). If this unit is

connected to an HDTV through other equipment, it must also be 1080p

compatible.

24p Output [BD-V] [DVD-V]

When this unit is connected to a TV supporting 1080/24p

output via an HDMI cable, this unit displays each frame at

1/24 second intervals – the same interval originally shot

with the film camera.

≥When playing DVD-Video, set to “On” and then set “24p”

in “Picture” (> 25) to “On”

≥On: Images in 24p are output in 24p as they are.

However,

–when video is being output at 24 frames, images from any other

terminal than the HDMI terminal may not be output properly.

–[BD-V]: when images other than 24p are played, images are output at

60p.

≥Off

HDMI Output Range

Effective when connected to a device that only supports

RGB output.

≥Standard

: The video is output as it is.

≥Enhanced: When the black and white contrast of a video is low, the signal

is enhanced to reproduce clear video.

HDMI Audio Output

This setting selects whether or not to output audio from

HDMI.

≥On

≥Off: When the TV is connected to this unit using an HDMI cable, and this unit

is also connected to other devices, such as an amplifier/receiver using an

optical digital audio cable or a coaxial cable.

VIERA Link

Set to use “HDAVI Control” function when connected with

an HDMI cable to a device that supports “HDAVI Control”.

≥On

≥Off: Select when you do not want to use “HDAVI Control”.

Component Resolution

This sets the video output resolution when using the

component video terminal.

≥576i/480i

≥576p/480p

≥720p ≥1080i

480i, 480p: When playing NTSC discs

576i, 576p: When playing PAL discs

Even if you select “720p” or “1080i”, the video output resolution is restricted to

“576p/480p” when DVD-Video discs, DivX and BD-Video discs recorded at a rate

of 50 field per second are output from the COMPONENT VIDEO OUT terminals.

Speaker

You can set the unit to output the best possible sound for

your speakers.

≥Multi-Channel

: When using 3 or more speakers. (> 29)

≥2-Channel: When using two speakers.

2ch down-mix audio are output from Front L and Front R.

TV System

Change the setting to match the equipment you are

connecting with.

≥If picture output is not smooth, change the setting.

≥When NTSC contents are played, they are outputted in the

signal format specified in the “NTSC Contents Output”,

irrespective of the settings here.

≥NTSC: Select when connecting to a NTSC television.

≥PA L

: Select when connecting to a PAL or multi-system television.

“Network Settings”

IP Address / DNS Settings (> 12)

≥Press [OK] to show the following settings.

Connection Test — — — —

IP Address Auto-Assignment ≥On

≥Off

IP Address — — —. — — —. — — —. — — —

Subnet Mask — — —. — — —. — — —. — — —

Gateway Address — — —. — — —. — — —. — — —

DNS-IP Auto-Assignment ≥On

≥Off

Primary DNS — — —. — — —. — — —. — — —

Secondary DNS — — —. — — —. — — —. — — —

Connection Speed Auto-Config ≥On

≥Off

Connection Speed Setting

This is enabled only when “Connection Speed Auto-Config” is

turned “Off”.

≥10BASE Half Duplex

≥10BASE Full Duplex

≥100BASE Half Duplex ≥100BASE Full Duplex

Proxy Server Settings (> 13)

≥Press [OK] to show the following settings.

Initialize

Proxy Address (The initial setting is blank.)

Proxy Port Number (The initial setting is “0”.)

DMP-BD50EG-RQT9185_eng&swe.book 28 ページ２００８年４月２２日　火曜日　午前１０時３４分

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 79 80

Comments to this Manuals

No comments

Panasonic DMPBD50 User Manual Page 28

Comments to this Manuals

Related products and manuals for Blu-Ray players Panasonic DMPBD50