Panasonic DMPBD65 Operations Instructions download pdf (Page 36)

VQT2H94

Specifications

Signal system: PA L/N TS C

Operating temperature range: i5 oC to i35 oC

Operating humidity range:

10 % to 80 % RH (no condensation)

Video output: 1.0 Vp-p (75 ≠)/Pin jack :1 system

[BD65]

Component video output (Y: green, P

: blue

: red):

Y :1.0 Vp-p (75 ≠)/PB, PR : 0.7 Vp-p (75 ≠)/

Pin jack:1 system

Audio output: 2 Vrms (1 kHz, 0 dB)/Pin jack

Number of connectors : 2 channel:1 system

Digital audio output:

Optical digital output :Optical terminal

HDMI AV output: Type A (19 pin)

HDMI (V.1.4, Content Type)

This unit supports “HDAVI Control 5” function.

SD card slot: Connector : 1 system

USB slot: USB2.0 : 1 system

[BD65] : Ethernet: 10BASE-T/100BASE-TX : 1 system

LASER Specification

Class 1 LASER Product:

Wave length:790 nm (CDs)/655 nm (DVDs)/405 nm (BDs)

Laser power: No hazardous radiation is emitted with the

safety protection

Power supply: AC 220 to 240 V, 50 Hz

Power consumption:

[BD65]:Approx. 20 W

[BD45]:Approx. 19 W

Power consumption in standby mode:

Approx. 0.2 W

Power consumption in quick start standby mode:

Approx. 7 W

Dimensions (WkDkH) : Including the projecting parts

430 mmk207 mmk49 mm

Mass: Approx. 1.9 kg

Specifications are subject to change without notice.

Safety precautions

∫ Placement

Set the unit up on an even surface away from direct sunlight,

high temperatures, high humidity, and excessive vibration.

These conditions can damage the cabinet and other

components, thereby shortening the unit’s service life. Do not

place heavy items on the unit.

∫ Voltage

Do not use high voltage power sources. This can overload the

unit and cause a fire. Do not use a DC power source. Check

the source carefully when setting the unit up on a ship or other

place where DC is used.

∫ AC mains lead protection

Ensure the AC mains lead is connected correctly and not

damaged. Poor connection and lead damage can cause fire

or electric shock. Do not pull, bend, or place heavy items on

the lead.

Grasp the plug firmly when unplugging the lead. Pulling the

AC mains lead can cause electric shock. Do not handle the

plug with wet hands. This can cause electric shock.

∫ Foreign matter

Do not let metal objects fall inside the unit. This can cause

electric shock or malfunction.

Do not let liquids get into the unit. This can cause electric

shock or malfunction. If this occurs, immediately disconnect

the unit from the power supply and contact your dealer.

Do not spray insecticides onto or into the unit. They contain

flammable gases which can ignite if sprayed into the unit.

∫ Service

Do not attempt to repair this unit by yourself. If sound is

interrupted, indicators fail to light, smoke appears, or any

other problem that is not covered in these instructions occurs,

disconnect the AC mains lead and contact your dealer or an

authorized service centre. Electric shock or damage to the

unit can occur if the unit is repaired, disassembled or

reconstructed by unqualified persons.

Extend operating life by disconnecting the unit from the power

source if it is not to be used for a long time.

DMP-BD65_45EB-VQT2H94_eng.book 36 ページ２０１０年１月１５日　金曜日　午後９時４８分

1 2 ... 31 32 33 34 35 36 37 38 39 40

Comments to this Manuals

No comments

Panasonic DMPBD65 Operations Instructions Page 36

Comments to this Manuals

Related products and manuals for Blu-Ray players Panasonic DMPBD65