Panasonic DMRPWT655EB User Manual Page 77

  • Download
  • Add to my manuals
  • Print
  • Page
    / 88
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 76
Troubleshooting
SQT0992
77
The timer recording programmed via Network
Service does not work properly.
Timer recording programmed via Network
Service will be recorded with the same
conditions as those of manual timer recording,
and some functions such as “Guide Link” (> 30)
does not work.
A part or whole of a recorded title has been lost.
If there is a power failure or the AC mains lead is
disconnected from the household mains socket
while recording or editing, the title may be lost or
the HDD may become unusable. We cannot offer
any guarantee regarding lost programmes.
Cannot play back.
The disc is dirty. (> 10)
The disc is scratched or marked.
The disc may not be able to play back if it was
not finalised or a Top Menu was not created on
the equipment used for recording.
Refer to “Screen icons”. (> 35)
Audio and video momentarily pause.
DVD-R DL and +R DL discs have two writable layers
on one side. Video and audio may momentarily cut
out when the unit is switching layers.
Image for the Quick View is not smooth.
Image may not be played back smoothly in case
of high definition titles.
Cannot edit.
You may not be able to edit on the HDD if there
is no available space. Delete any unwanted
titles to create empty space. (> 42)
[PWT655]
The contents of the SD card cannot be read.
Remove the card from the slot and then insert
again. If this does not solve the problem, switch
the unit to standby mode and turn it on again.
Photos do not play back normally.
The images that were edited on the PC, such as
Progressive JPEG, etc., may not play back.
(> 8)
Auto Renewal Recording does not work
properly.
The programme will not be overwritten in the
following cases:
- the programme is protected
- any programme is being played back or copied
- a screen such as Video Menu is displayed
Instead, the programme will be saved as a
separate programme and that will be overwritten.
Play
You have forgotten your rating PIN number for
parental control.
The PIN number for parental control and the
rating level return to the factory preset.
The default PIN number is “0000”.
1 While the unit is on, press and hold [OK], the
yellow button and the blue button at the
same time for more than 5 seconds.
“00 RET” is displayed on the front panel
display.
2 Repeatedly press [1] (right) until “03 VL” is
displayed on the front panel display.
3 Press [OK].
“INIT” is displayed on the front panel
display.
Edit
Photo
DMR-PWT655_550EB_eng.book 77 ページ 2015年9月14日 月曜日 午後2時7分
Page view 76
1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 87 88

Comments to this Manuals

No comments