Panasonic HDC-SD80 Operations Instructions download pdf (Page 42)

VQT3J26

The used space and remaining recordable time of the SD card, Built-in memory and HDD

can be checked.

≥ Touching [CHANGE MEDIA] switches the unit between the display for the SD card and the

display for the built-in memory/HDD.

≥ When the mode switch is set to , remaining recordable time for the selected recording

mode is displayed.

≥ Touch [EXIT] to close the indication.

≥ The SD card, built-in memory or built-in HDD requires some space to store information and

manage system files, so the actual usable space is slightly less than the indicated value.

The usable built-in memory/HDD space is generally calculated as 1 GB=1,000,000,000

bytes. The capacities of this unit, PCs and software are expressed as

1 GB=1,024k1,024k1,024=1,073,741,824 bytes. Therefore, the indicated value of the

capacity appears to be smaller.

Perform the touch screen calibration if a different object to the one touched is selected.

1 Touch [CALIBRATION].

≥ Touch [ENTER].

2Touch the [_] that appears on the screen with the supplied stylus pen.

≥ Touch [_] in sequence (up left # down left # down right # up right # centre).

3 Touch [ENTER].

This item is used to start the unit demonstration.

(Only when the mode is at the or position)

If [DEMO MODE] is switched to [ON] and you touch [EXIT] when there is no SD card inserted

and while this unit is connected to the AC adaptor, the demonstration automatically starts.

If any operation takes place, the demonstration is cancelled. However if no operations take

place for approx. 10 minutes, the demonstration automatically starts again. To stop the

demonstration, set [DEMO MODE] to [OFF] or insert an SD card.

This item is used to start the optical image stabilizer demo.

(Only when the mode is at the position)

Touch [O.I.S. DEMO], the demonstration automatically starts.

When you touch [EXIT], the demonstration will be cancelled.

You can select the language on the screen display and the menu screen.

[MEDIA STATUS]

[CALIBRATION]

[DEMO MODE]

[OFF]/[ON]

[O.I.S. DEMO]

[LANGUAGE]

HDCSD80&TM80&HS80EB-VQT3J26_mst.book 42 ページ２０１１年１月１１日　火曜日　午前１１時４４分

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 147 148

No comments

Panasonic HDC-SD80 Operations Instructions Page 42