Panasonic WV-Q174 Operations Instructions download pdf (Page 1)

Ceiling Mount Bracket

Operating Instructions

Model No. WV-Q174

WV-Q174E

Before attempting to connect or operate this product,

please read these instructions carefully and save this manual for future use.

The model number is abbreviated in some descriptions in this manual.

Ns0810-3012 3TR006706DZA Printed in China

Features

This ceiling embedded bracket is exclusively designed to mount a color CCTV camera or a network

camera. Refer to the catalog or the operating instructions of the camera for supported cameras.

This bracket is an embedded type to reduce the exposed portion of the camera body.

Precautions

• Refer installation work to the dealer.

Installation work requires technique and experiences. Failure to observe this may cause fire,

electric shock, injury, or damage to the product.

• Be sure to consult the dealer.

• Use only the specified camera.

Failure to observe this may cause a fall of an inappropriate camera resulting in injury or acci-

dents.

• Refer to the catalog or the operating instructions of the camera for supported cameras.

• Select an installation area that can support the total weight.

If a selected area is too weak to support the total weight, a fall of the product may occur resulting

in injury.

• Installation work shall be started after sufficient reinforcement.

• Avoid installing this bracket in the locations where salt damage occurs or corrosive gas is

produced.

Otherwise, the mounting portions will deteriorate and accidents such as a fall of the camera may

occur.

• The screws and fixation mechanisms shall be tightened securely.

Failure to observe this may cause a fall of the camera resulting in injury.

• Periodic inspections shall be conducted.

Rust on the metal parts or screws may cause a fall of the product resulting in injury.

• Consult the dealer for the inspections.

• Do not rub the edges of metal parts with your hand.

Failure to observe this may cause injury.

• Make sure that the installation area is strong enough to hold the total weight of the camera

assembly before installation.

• The ceiling mount bracket can be installed only when there is a space whose height is 70 mm or

more above a ceiling board.

• The ceiling mount bracket can be installed on a ceiling board whose thickness is 30 mm or less.

• The camera and the ceiling mount bracket should be fixed using the provided fixing screws, and

make sure that the both of them are fixed firmly.

• When the ceiling mount bracket is not necessary anymore, remove from the ceiling.

• Avoid installing in the following locations.

• Locations where it may get wet from rain or water splash (not only outdoor)

• Locations where a chemical agent is used such as a swimming pool

• Locations subject to steam and oil smoke such as a kitchen

• Locations where radiation or x-ray emissions are produced

• Locations where it may be damaged by briny air such as seashores

• Locations where the temperature is not within the ambient temperature of the camera in use

and this product

• Locations subject to vibrations (This product is not designed for on-vehicle use.)

• Locations where the temperature may rapidly change such as the peripheral areas of the air

outlets of air conditioners or doors facing outside. (In case of installing the camera in such

locations, the dome cover may become foggy or condensation may be caused on the cover.)

• The screws and bolts must be tightened with an appropriate tightening torque according to the

material and strength of the installation area. After tightening the screws or bolts, perform visual

check to ensure tightening is enough and there is no backlash.

Installations

Be sure to read "Precautions" before installation. It is recommended to read them while referring the

operating instructions of the camera together.

1. Make a hole of 160 mm {6-5/16 inches} diameter using a specialized tool, etc.

When it is impossible to make a precise hole

since no specialized tool is at hand or when

it is impossible to use it because of the loca-

tion, trace the hole shape using the provid-

ed template.

Important:

• Make a hole precisely. When the opened

hole is bigger or deformed too much, the

ceiling mount bracket cannot be stuck on

the ceiling board securely.

2. Position two of the spring hooks of the camera as shown in the illustration below.

When the ceiling mount bracket is installed after positioning them in the opposite side, they may

become hard to pull out.

3. Fix the ceiling mount bracket onto the ceiling board.

Loosen the clamping screws until the length between the clamp plates becomes wider that the

thickness of the ceiling board, and then clamp the ceiling board by tightening the clamping

screws.

Important:

• When the ceiling board is the plasterboard, make sure that no crack was made on the ceiling

board by clamping.

4. Connect the cables to the camera.

Refer to the operating instructions of the camera.

5-1. When the four mounting holes, fix the

camera using four fixing screws (acces-

sory).

Before fixing the camera, make sure that the

direction marker for installation on the cam-

era body is correctly positioned.

Important:

• This triangle mark and the arrow tip (gTOP)

of the direction marker for installation on the

camera body should be located on the

opposite sides.

(To be continued to the reverse page)

Ceiling

{6-5/16 inches}

ø160 mm

Move the hook head downward.

Spring hook

←

Main body

* Clamping screw

* Recommended tightening torque: 0.58 N·m {0.43 lbf·ft}

Main body

Triangle mark

* The "Panasonic" logo on the camera should

be located on the side of this triangle mark.

Maximum thickness of the

ceiling board is 30 mm

{1-3/16 inches} for installation.

Clamp the

ceiling board.

Clamp plates

Main body

Triangle mark

Camera

body

Fixing screw

(standard accessory)

Recommended

tightening torque:

1.57 N·m {1.16 lbf·ft}

Dome cover fixing screw

Dome cover

1 2

Summary of Contents

Page 1 - WV-Q174E

Ceiling Mount BracketOperating InstructionsModel No. WV-Q174WV-Q174EBefore attempting to connect or operate this product,please read these instructio

Page 2 - Installations (continued)

SpecificationsAmbient temperature: –10 °C to +50 °C {14°F to 122°F}Dimensions: ø186 mm {7-5/16 inches} embedding depth 55 mm {2-5/32 inches}Mass: App

Comments to this Manuals

No comments

Panasonic WV-Q174 Operations Instructions Page 1

Browse online or download Operations Instructions for Camera brackets Panasonic WV-Q174. Panasonic WV-Q174 User Manual

Summary of Contents

Comments to this Manuals

Panasonic WV-Q174 Operations Instructions Page 1

Browse online or download Operations Instructions for Camera brackets Panasonic WV-Q174. Panasonic WV-Q174 User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Camera brackets Panasonic WV-Q174