Panasonic BL-C10A User Manual download pdf (Page 78)

Operating Instructions

3.1.6 Resetting the Camera to Factory Default

All camera settings are reset to factory default directly after the Execute button is

clicked.

1. Click [Reset to Factory Default] on the Maintenance page.

2. Click [Execute].

• The indicator blinks orange, and then turns off for 10 seconds.

• All camera settings (user name, password, IP address, subnet mask etc.)

are reset to factory default.

• If the camera is reset to factory default, the network connection mode

changes to [Automatic Setup]. Reconfigure the camera seeing the Getting

Started.

Notes

• The internal clock will not be reset, but the time format will return to AM/

PM mode (see page 35). Set it again.

• See page 82—page 87 for default settings.

• Pressing the FACTORY DEFAULT RESET button resets the camera to

the factory default (see page 81).

• All buffered images are deleted when resetting the camera to factory

default.

• The reset operation takes about 1 minute.

• Do not turn off the camera during the reset operation.

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 103 104

No comments

Panasonic BL-C10A User Manual Page 78