Panasonic BL-WV10A User Manual download pdf (Page 60)

3 Viewing Camera Images

Registering the Home Position/Sensor Position

1. Using the navigator keys, pan and tilt the lens and aim it at the desired home

position.

2. To register the current position as the home position, hold the [ENTER] for

about 5 seconds. Press and hold [9] to register the current position as the

sensor position.

• A confirmation screen will appear.

Home Position Confirmation Screen

Sensor Position Confirmation Screen

3. Select [Yes] and press [ENTER] to confirm.

Note

• Use of the home and sensor positions stores data to the camera. When

multiple users are using the cameras, only the data for the last registration

will remain valid; other users can overwrite registered positions.

• You cannot set a camera so that its lens does not move to the sensor

position when the camera’s sensor is activated.

• Registering the home position and/or sensor position will also register the

brightness and white balance settings (see page 124) at the time of the

registration.

Registering the Preset Keys

The camera’s display positions can be registered to correspond to numbers of the

remote control keypad.

1. Using the navigator keys, pan and tilt the lens and aim it at the position you

would like to register to a preset key.

2. Hold the desired preset key number key ([1] to [8]) for roughly 5 seconds.

• A confirmation screen will appear.

• The currently set name for the preset will appear.

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 183 184

No comments

Panasonic BL-WV10A User Manual Page 60