1 Camera Underwater Housing – TZ7 / ZS3 (Panasonic) User Manual Contents: 1. Introduction 2. Specifications 3. Function Controls 4. Set up
2 2. Specifications Test Pressure Housings individually tested to 10 Bar (90 m / 300 ft.) Recommended working pressure 60 m Closure Design Double
3 3.2 Control Details (1) FLASH WINDOW – for attaching flash extension to shift the flash forward for removing the shadow of the port or fibre optic
4 4.2 Maintaining the O-ring Seal If the main body to lid O-rings are not installed, install the O-rings before diving. Their care and maintenance
5 l Clean the O-ring recess (the square groove where the O-ring sits) with a cotton bud. l Inspect the O-ring all the way round its surface for dam
6 4.5 Mounting the camera in the housing: Replace the lid and make sure the lever is perpendicular to the side wall of the housing. Lock
7 5. Use & Care of Housing 5.1 Pre Dive Function Check. Just before entering the water, make a habit of reviewing that you have carried out
8 5.4 Transportation. Please protect the housing during transportation. It is recommended to remove the handle, and shutter extension, and wrap th
9 (Copy to be retained by user) Housing Type : Date of Purchase: Serial Number : (Labelled inside housing) Dealer : Owner’s Name : e-mail :
Comments to this Manuals