Panasonic SCEN53P Operations Instructions Page 5

  • Download
  • Add to my manuals
  • Print
  • Page
    / 16
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 4
RQT6734
5
Batteries
The remote control Placement of speakers
Notes
Keep your speakers at least 10 mm (
13
/32˝) away from the system
for proper ventilation.
These speakers do not have magnetic shielding. Do not place them
near televisions, personal computers or other devices easily
influenced by magnetism.
To avoid damage to the speakers, do not touch the speaker cones
if you have taken the nets off.
Use
Caution
Use the speakers only with the recommended
system. Failure to do so may lead to damage to
the amplifier and/or the speakers, and may result
in the risk of fire. Consult a qualified service
person if damage has occurred or if you
experience a sudden change in performance.
Do not attach these speakers to walls or ceilings.
CAUTION:
The battery used in this device may present a risk of fire or
chemical burn if mistreated. Do not recharge, disassemble,
heat above 100˚C (212˚F), or incinerate. Replace battery with
Panasonic part number CR 2032 only. Use of another battery
may present a risk of fire or explosion.
Dispose of used battery promptly. Keep away from children.
Do not disassemble and do not dispose of in fire.
The battery holder of this remote control comes with a safety lock.
To open, use a pin (not included) or similar object to push into hole
A and pull out the battery holder,
Insert the battery with the positive (+) side facing down.
Do not use rechargeable type batteries.
Aim at the sensor, avoiding obstacles, at a maximum range of 7
meters directly in front of the unit.
Keep the transmission window and the unit’s sensor free from dust.
Operation can be affected by strong light sources, such as direct
sunlight, and the glass doors on cabinets.
Do not:
put heavy objects on the remote control.
take the remote control apart.
spill liquids onto the remote control.
Speakers are designed identically so that no left or right channel
orientation is necessary.
PUSH
A
3
1
2
PUSH
1
Remote control
signal sensor
Transmission
window
About 7 meters in front of
the signal sensor
30
˚
30
˚
02-05 SC-SC-EN5 P [En] 1/14/03, 3:32 PM5
Page view 4
1 2 3 4 5 6 7 8 9 10 ... 15 16

Comments to this Manuals

No comments