Panasonic SCPM9 User Manual download pdf (Page 23)

Reference

RQT7357

Troubleshooting guide

Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the remedies

indicated in the chart do not solve the problem, refer to the “Product information” on page 3.

Reference pages are shown as black circled numbers.

Common Problems

Noise is heard.

The stereo indicator flickers

or doesn’t light.

Sound is distorted.

A beat sound is heard.

A low hum is heard during

AM broadcast.

Use an outdoor antenna. 5

Turn the TV off or separate it from the unit.

Separate the antenna from other cables and cords.

Listening to the radio

The picture on the TV

disappears or stripes appear

on the screen.

The location and orientation of the antenna are incorrect. If you are using an indoor

antenna, change to an outdoor antenna. 5

The TV antenna wire is too close to the unit. Separate the antenna wire of the TV set

from the unit.

When there is a television set nearby

Recording is not possible. If the erasure prevention tabs have been removed, cover the holes with adhesive tape.

Using the cassette deck

The display is wrong or play

won’t start.

The disc may be upside down. !

Wipe the disc.

Replace the disc if it is scratched, warped, or nonstandard.

Condensation may have formed inside the unit due to a sudden change in

temperature. Wait about an hour for it to clear and try again.

Playing discs

Remote control doesn’t work. Check the batteries are inserted correctly. 4

Replace the batteries if they are worn.

The remote control

No sound.

Sounds unfixed, reversed or

come from one speaker only.

Humming heard during play.

Turn the volume up.

The speaker cords may be shorted. Turn the unit off, check and correct the

connections and turn the unit on. 5

Check the speaker connections. 5

An AC power supply cord or fluorescent light is near the cables. Keep other appliances

and cords away from this unit’s cables.

“ERROR” is displayed.

“- -:- -” appears on the display.

“F76” is displayed.

Incorrect operation performed. Read the instructions and try again.

You plugged the AC power supply cord in for the first time or there was a power failure

recently.

Set the time. 7

Check and correct the speaker cord connections. 5

If this does not fix the problem, there is a power supply problem. Consult the dealer.

RQT7357-C_22-24_EN 13/1/04, 10:32 am23

1 2 ... 18 19 20 21 22 23 24

Comments to this Manuals

No comments

Panasonic SCPM9 User Manual Page 23

Comments to this Manuals

Related products and manuals for CD players Panasonic SCPM9