Panasonic CF-18 User Manual download pdf (Page 78)

LAN

NOTE

 If you are unable to connect to the network (when the indicator of your HUB unit does

not light):

A Display [Device Manager] screen.

Select [Device Manager] in [start] - [Control Panel] - [Performance and

Maintenance] - [System] - [Hardware].

B Select the network adaptor you are using from [Network adapters].

C Select [Advanced].

D Confirm the settings of each item.

This is a function of the internal LAN to automatically power the computer on from a network

server when the computer is in the standby or hibernation mode. To use this function, it is

necessary to have a network environment that accommodates Wake up from LAN.

Enabling the Wake up from LAN Function

A Select [Device Manager] in [start] - [Control Panel] - [Performance and

Maintenance] - [System] - [Hardware].

B Select the internal network adaptor from [Network adapters].

C Select [Power Management], add the check mark for [Allow the computer to turn

off this device to save power] and [Allow this device to bring the computer out of

standby], then select [OK].

CAUTION

 Be sure to connect the AC adaptor, and enable the supply of power.

NOTE

 Even when a password is set in the Setup Utility and [Password on boot] is set to

[Enable], it is not necessary to input the password set in the Setup Utility when the

computer resumes from standby or hibernation mode.

Wake up from LAN

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 129 130

No comments

Panasonic CF-18 User Manual Page 78