Panasonic PVL552 Operations Instructions download pdf (Page 10)

For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]

Supplying Power

Caution:

• Charge only with specified charger.

• Battery can be charged within a temperature range of

10 °C (50 °F) and 35 °C (95 °F).

• Battery is normally warm after charging or just after use.

• Do not use an insufficiently charged or worn-out Battery.

Safety precautions:

• Do not get Battery near, or dispose of in, fire.

• Do not directly connect (short circuit) the positive (+)

and negative (–) terminals.

• Never attempt to disassemble or reassemble Battery.

To avoid Battery damage:

• Do not drop or jar Battery.

• Use Battery with specified units only.

• If Battery is used in extremely high

temperatures, a safety device will

automatically prevent operation.

To prolong Battery life:

• While not in use, remove Battery from

the Camcorder and AC Adaptor, and

store in a cool, dark, dry place.

• Keep Battery terminals clean.

Note:

• While the DC Power Cable (supplied) is

connected to the AC Adaptor, the Battery

cannot be charged.

• When not in use, unplug AC Adaptor from

AC outlet. (Adaptor uses 1.2 W of electricity

while plugged in.)

1 Connect AC Adaptor DC OUT to

Camcorder DC IN with supplied DC

Power Cable.

2 Plug in AC Adaptor.

POWER Lamp lights.

DC IN

Connector

DC Power Cable

POWER Lamp

DC OUT

Connector

DC IN

Connector

This unit will operate on 110/120/220/240 V AC 50/60 Hz. An AC plug adaptor may be required

for voltages other than 120 V AC. Please contact either a local or foreign electrical parts

distributor for assistance in selecting an alternate AC plug. We recommend using the accessory

power plug adaptor (VJSS0070) in an area which has special AC outlets.

CAUTION:

Battery Care

AC Adaptor

Cigarette

Lighter

Socket (12 V)

Car Battery Cord

(optional)

Cigarette

Lighter Plug

Car Battery Cord (Optional)

1 Connect PV-C16 Car Battery Cord

(optional) to Camcorder DC IN.

2 A Start engine first.

B Plug Car Battery Cord into

Cigarette lighter socket.

• If Car Battery cord fuse needs replacing,

use exact current rating (in amps).

Note:

• This cord only works in vehicles equipped

with DC 12 V (negative ground) battery.

Check with your car/truck dealer. Use only

specified car battery cord.

• To avoid blowing the car battery cord fuse,

do step 2 in the proper order.

• Running vehicles must be well ventilated.

• When not in use, disconnect cigarette

lighter plug.

• For personal safety the driver of the vehicle

should not attempt to operate the

camcorder while driving.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 83 84

Comments to this Manuals

No comments

Panasonic PVL552 Operations Instructions Page 10

Comments to this Manuals

Related products and manuals for Drive recorders Panasonic PVL552