Panasonic DMREX773 Operations Instructions Page 79

  • Download
  • Add to my manuals
  • Print
  • Page
    / 96
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 78
VQT2J34
79
Use these connections to play sound through speakers
connected to an amplifier or system component.
It is possible to output 2-channel stereo sound.
Connect to terminals of the same colour.
It is possible to output multi-channel surround sound on
DVD-Video.
Connect an amplifier or system component with a built-
in Dolby Digital, DTS or MPEG decoder.
Adjust settings in “Digital Audio Output” as needed,
depending on other connections and the amplifer
receiver (> 73).
When connected to an HDMI compatible unit, an
uncompressed digital audio and video signal is
transmitted, enabling you to enjoy high quality, digital
video and audio with just one cable. When connecting to
an HDMI-compatible HDTV (High Definition Television),
the output can be switched to 1080p, 1080i or 720p HD
video.
Please use High Speed HDMI Cables that have the
HDMI logo (as shown on the cover).
When setting video output to “1080p”, please use the
HDMI cables 5.0 meters or less.
Set “Digital Audio Output” to “HDMI and Optical” (> 75).
(The default setting is “HDMI and Optical”.)
Adding an Amplifer or Receiver
Using an Audio Cable (not included)
Using an Optical Digital Audio Cable (not included)
Notes
When this unit is connected to an amplifier with an optical digital
audio cable and connected to a television with an HDMI cable, you
can enjoy the highest quality of audio from the disc by setting
“Digital Audio Output” to “Optical Only” in the Setup menu (> 75).
In this case audio is only output from the amplifier not the television.
You cannot use DTS Digital Surround decoders not meant for DVD.
Before purchasing an optical digital audio cable, check the terminal
shape of the equipment to be connected.
AUDIO IN
RL
AUDIO
OUT
VIDEO
This unit
Amplifier
or
System Component
L
R
This unit
Amplifier or System Component
OPTICAL
OPTICAL IN
DIGITAL AUDIO OUT
(PCM/BITSTREAM)
Insert fully with this side up.
Do not bend cable sharply.
Using an HDMI (High Definition Multimedia Interface)
Cable (not included)
Regarding VIERA Link “
HDAVI Control
TM
” function
When connecting with a Panasonic TV (VIERA) or a
receiver equipped with the “HDAVI Control” function,
linked operations would be possible. [> 42, Linked
Operations with the TV (VIERA Link “HDAVI
Control
TM
”/Q Link)]
It is recommended that you use Panasonic’s HDMI
cable.
Recommended part number: RP-CDHS15 (1.5m),
RP-CDHS30 (3.0 m), RP-CDHS50 (5.0 m), etc.
Non-HDMI-compliant cables cannot be utilised.
Notes
If connecting to equipment that is only compatible with 2 channel
audio output, audio with 3 channels or more will be down-mixed
(> 92) and output as 2 channels, even if connecting with an HDMI
cable (some discs cannot be down-mixed).
You cannot connect this unit to DVI devices that are incompatible
with HDCP.
For display units compatible with HDCP (High-Bandwidth Digital
Content Protection) that are equipped with a digital DVI input
terminal (PC monitors, etc.):
Depending on the unit, picture may not be displayed properly or at
all when connecting with a DVI/HDMI switching cable (audio cannot
be output).
AV1(TV)
AV
HDMI IN
HDMI OUT
HDMI IN
HDMI AV OUT
This unit
TV
Receiver
Connecting with a Panasonic TV (VIERA)
If the 21-pin Scart cable is connected, the following
functions are available.
Direct TV Recording (> 26)
DMR-EX773EB_VQT2J34-B.book 79 ページ 2010年1月7日 木曜日 午後5時8分
Page view 78
1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 95 96

Comments to this Manuals

No comments