Panasonic NE-1054F User Manual download pdf (Page 4)

INSTALLATION AND GROUNDING INSTRUCTIONS

Examine Your Oven

Unpack oven, remove all packing material, and examine the

oven tor any damage such as dents, broken door latches or

cracks in the door. Notify dealer immediately if oven is

damaged. DO NOT install if oven is damaged.

Remove Protective Piastic Film

If a plastic film has been wrapped around the oven to protect

the painted finish from scratching during shipping, please

remove this plastic film prior to using the oven. (However, all

ovens do not have plastic film wrapping.)

Placement of Oven

1. Oven must be placed on a flat, stable surface. For proper

operation, the oven must have sufficient airflow. Allow

3-inches of space on both sides of the oven and 1-inch of

space on top of oven.

a. DO NOT block air vents. If they are blocked during

operation, the oven may overheat. If the oven overheats,

a thermal safety device will turn the oven off. The oven

will remain inoperable until it has cooled.

b. DO NOT place oven near a hot damp surface such as a

gas or electric range.

c. DO NOT operate oven when room humidity is too high.

Grounding Instructions

This appliance must be grounded. In the event of an electrical

short circuit, grounding reduces the risk of electric shock by

providing an escape wire for the electric current. This

appliance is equipped with a cord having a grounding wire

with a grounding plug. The plug must be plugged into an

outlet that is properly installed and grounded.

WARNING—Improper use of the grounding plug can result in

a risk of electric shock.

Consult a qualified electrician or service person if the

grounding instructions are not completely understood, or if

doubt exists as to whether the appliance is properly

grounded.

If it is necessary to use an extension cord, use only a three

wire extension cord that has a three blade grounding plug,

and a three slot receptacle that will accept the plug on the

appliance. The marked rating of the extension cord should be

equal to or greater than the electrical rating of the appliance.

Wiring Requirements

1. The oven must be plugged into at least a 15 AMP 120

VOLT, 60 Hz GROUNDED OUTLET,

Where a standard two-prong outlet is encountered, it is the

personal responsibility and obligation of the user to have it

replaced with a properly grounded three-prong

outlet (Fig. 1).

Fig, 1

.The oven must be on a SEPARATE CIRCUIT. No other

appliance should share the circuit with the microwave oven.

If it does, the branch circuit fuse may blow, or the circuit

breaker may trip or the food may cook slower than the

times recommended in this manual.

.The VOLTAGE used must be the same as specified on this

microwave oven (120 V). Using a higher voltage is

dangerous and may result in afire or other accident

causing oven damage. Using a lower voltage will cause

slow heating. Panasonic is NOT responsible for damage

resulting from the use of the oven with other than specified

voltage.

-4-

1 2 3 4 5 6 7 8 9 ... 19 20

Comments to this Manuals

No comments

Panasonic NE-1054F User Manual Page 4

Comments to this Manuals

Related products and manuals for For Home Panasonic NE-1054F