Designed specifically for 42PV30ATY-42PV30NZBUS4804IMPORTANT: DO NOT PUSH OR PULL THE TV TO MOVE THE CABINET.Please follow these assembly instructio
STEP 71. Fasten the Front Rails an d Front Mouldings to the Base while holding them flush with outside e dge of Stand using 2Locking Screws.View from
1. Tighten the 4 pre-fitted Cams in Top, by turning them clockwise.STEP 8
STEP 91. Fasten the Glass Brackets to Side Mouldings using Screws as shown.Right Glas s Bracket x 2Left Glass Bracket x 2P860246 x 8
STEP 101. Slide each Glass Shelf into Glass Brackets and tighten Grub S crews from the underside of brackets as shown, makesure the Back Edge of Glass
STEP 142. While Gently pushing t he Plasma TV back to ensure the TV is standing straight on the stand, tighten the TV with the Bolts asshown below.1.
Once Cables are behind Pins,slide the Cable Pins across intothe Side Moulding.CABLE MANAGEMENTBac k Side MouldingSide Moulding1. With Cable Pins pushe
Left Location PinRight Location PinPackerBack sideMouldingCable PinIMPORTANT:- MISSING PARTS CANNOT BE REP LA CED UNLESS THE INFORMATION REQUESTED ABO
STEP 11.Fasten5CastorstotheBaseasshown.2. Insert Wooden Do wels as shown above.x10P800201 x 16Base (underside)CastorP860045
Allen key
STEP 51. Fit Sleeve Nut at one end of each Threaded Rod using an Allen Key.2. Insert Threaded Rod into Assembly through Base as shown.3. Fit another S
STEP 61. Fit 2 S m all Connecting Rods to each Front Rail as shown.2. Fit Front Mouldings to Ba s e as shown.3. Fit Front Rails on to Front Mouldings
Comments to this Manuals