Panasonic SC-BT735 User Manual download pdf (Page 21)

Getting started

VQT2Q52

Network Easy Setting (Connection Test)

Network Easy Setting (Internet Connection Test)



≥ Refer to the operating instructions of the hub or router.

≥ You can perform this setup anytime by selecting “Network Easy Setting” in

the Setup menu. (> 40)

≥ You can redo these settings individually using “Network Settings”. (> 40)

≥ Do not connect to a wireless network for which you do not have usage

rights. Wireless networks for which you do not have usage rights (SSID

)

may appear during the automatic search for a wireless network

environment. However, if you connect, there is a risk that it will be regarded

as illegal access.

≥ After performing network settings on this unit, the settings (encryption level,

etc.) of the Wireless router (Access point) might change. When you have

trouble getting online on your PC, perform the network settings of your PC

in accordance with the settings of Wireless router (Access point).

*2 This is a name given to identify specific networks among wireless LANs.

When the SSID is the same in two devices, data can be transmitted

between them.

Occasionally, Panasonic may release updated firmware for this

unit that may add or improve the way a feature operates.

These updates are available free of charge.

This unit is capable of checking the firmware automatically

when connected to the Internet via a broadband connection.

When a new firmware version is available, the following screen

is displayed.

If downloading on this unit fails or this unit is not connected to

the Internet, then you can download the latest firmware from

the following website and burn it to a CD-R to update the

firmware.

http://panasonic.jp/support/global/cs/

(This site is in English only.)

To show the firmware version on this unit. (> 40, “System

Information”)

DO NOT DISCONNECT the unit from the AC power or perform

any operation while the update takes place.

After the firmware is installed, “FINISH” will be displayed on the

unit’s display. Unit will restart and the following screen will be

displayed.



≥ You can perform update anytime by selecting “Firmware Update” in the

Setup menu. (> 40)

≥ Downloading will require several minutes. It may take longer or may not

work properly depending on the connection environment.

≥ If you do not want to check for the latest firmware version, set “Automatic

Update Check” to “Off”. (> 40)

Display

Check the

following

1. LAN cable connection or

Connection to access point

:Fail ≥ Connection of

the LAN

cables

(> 18)

2. IP address setting :Fail

3. Connection to gateway :Fail

1. LAN cable connection or

Connection to access point

:Pass

≥ Connection

and settings

of the hub

and router

≥ Settings of

“IP Address /

DNS

Settings”

(> 40)

2. IP address setting :Fail

3. Connection to gateway :Fail

1. LAN cable connection or

Connection to access point

:Pass

2. IP address setting

:Home

network

available

3. Connection to gateway :Fail

1. LAN cable connection or

Connection to access point

:Pass

2. IP address setting :Pass

3. Connection to gateway :Fail

Display Check the following

Cannot find the server.

(B019)

≥ “Primary DNS” and “Secondary

DNS” settings of “IP Address /

DNS Settings” (> 40)

Failed to connect to

the server.

(B020)

≥ The server may be busy or the

service may have been

suspended. Please wait a few

moments, and then try again.

≥ Settings of “Proxy Server

Settings” (> 40) and the router

Network Easy Setting (Connection Test)

Yes No

Complete.

1. LAN cable connection

2. IP address setting

3. Connection to gateway

LAN cable is not connected.

Please check the connection.

Select “Yes” and press [OK] to check network

connection again.

Select “No” and press [OK] to finish Network

Easy Setting.

: Fail

Network Easy Setting (Internet Connection Test)

Complete.

- Connection to the Internet : Fail(B019)

Failed the connection test.

Cannot find the server.(B019)

Please refer to the operating instructions for the cause

of the error and the solution for it.

Press [OK].

Firmware updating

Firmware Update

Latest Online Version: x.xx

Current Installed Version: x.xx

Do you want to start firmware update?

For the update information, please visit the

following website:

http://panasonic.net/support/

RETURN

Yes No

The firmware has been updated.

Current Installed Version:

x.xx

RETURN

SCBT735_330_230EBEPEG_VQT2Q52-B.book 21 ページ２０１０年２月９日　火曜日　午前１０時５１分

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 51 52

Comments to this Manuals

No comments

Panasonic SC-BT735 User Manual Page 21

Comments to this Manuals

Related products and manuals for Home cinema systems Panasonic SC-BT735