Panasonic SCPT480 User Manual download pdf (Page 8)

RQTX1126

Conserving power

This unit consumes a small amount of power, even

when it is in standby mode (approx. 0.38 W). To save

power when the unit is not to be used for a long time,

unplug it from the household mains socket.

You will need to reset some memory items after

plugging in this unit.

[Note]

The included AC mains lead is for use with this unit only.

Do not use it with other equipment. Also, do not use

cords for other equipment with this unit.

≥Use alkaline or manganese batteries.

≥Do not heat or expose to flame.

≥Do not leave the battery(ies) in an automobile exposed

to direct sunlight for a long period of time with doors

and windows closed.

Do not:

≥mix old and new batteries.

≥use different types of batteries at the same time.

≥take apart or short circuit.

≥attempt to recharge alkaline or manganese batteries.

≥use batteries if the covering has been peeled off.

Mishandling of batteries can cause electrolyte leakage

which can severely damage the remote control.

Remove the batteries if the remote control is not going

to be used for a long period of time. Store in a cool,

dark place.

Aim at the remote control signal sensor (B 4), avoiding

obstacles.

Distance: Within approx. 7 m

Angle: Within approx. 20° up and down, approx. 30° to

the left and right

The EASY SETUP screen assists you in making

necessary settings.

≥Language

Select the language used on menu screen.

≥TV aspect

Select the aspect to suit your TV.

≥Speaker layout

Select “Surround layout (Recommended)” mode or

“Front layout (Alternative)” mode according to your

speaker layout (B 6, Installation).

≥Speaker check

Listen to speaker output to confirm speaker connections.

≥Speaker output

Make surround sound setting for speaker output.

≥TV audio

Select the audio input connection from your TV.

For AUX connection (B 7): Select “AUX”.

For HDMI connection (B 7): Select “ARC”.

For DIGITAL AUDIO IN OPTICAL connection (B 7):

Select “DIGITAL IN”.

For SCART (AV) connection (B 7): Select “AV”.

This will be the TV audio setting for VIERA Link

“HDAVI Control”. (B 16)

[Note]

≥

If this unit is connected to a “HDAVI Control 3 or later”

compatible TV via HDMI cable, the menu language and

TV aspect information will be retrieved via VIERA Link.

≥If this unit is connected to a “HDAVI Control 2”

compatible TV via HDMI cable, the menu language

information will be retrieved via VIERA Link.

≥Settings in the EASY SETUP can also be changed

in the player settings (e.g. language, TV aspect,

TV audio (B 19)).

step 3 AC mains lead connection

BE SURE TO READ THE CAUTION FOR THE AC

MAINS LEAD ON PAGE 2 BEFORE CONNECTION.

step 4 Preparing the remote control

Batteries

CAUTION

Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type

recommended by the manufacturer.

Dispose of used batteries according to the

manufacturer’s instructions.

Use

AC IN

To household mains socket

This unit

(rear)

AC mains lead (included)

R6/LR6, AA

Press in and lift up.

Replace the cover.

Insert so the poles (r and j) match those in the

remote control.

step 5 EASY SETUP

Preparation

Turn on your TV and select the appropriate video input

mode (e.g. VIDEO 1, AV 1, HDMI, etc.) to suit the

connection to this unit.

≥To change your TV’s video input mode, refer to its

operating instructions.

≥This remote control can perform some basic TV

operations (B 4).

Press [Í]1 to turn on the unit.

≥When the EASY SETUP screen appears

automatically, skip steps 2 to 7.

Press [DVD]5 to select “DVD/CD”.

Press [START]C to show the START menu.

Press [3, 4]9 to select “Setup” and press

[OK]9.

Press [3, 4]9 to select “OTHERS” and press

[OK]9.

Press [3, 4]9 to select “EASY SETUP” and

press [OK]9.

Press [OK]9 to select “SET”.

Press [

]

to select “Yes” and press [OK]

Follow the messages and make the settings

with [3, 4, 2, 1]9 and [OK]9.

(B below, EASY SETUP settings)

Press [OK]9 to finish EASY SETUP.

EASY SETUP settings

SET

MAIN

DISC

VIDEO

AUDIO

DISPLAY

HDMI

OTHERS

RETURN

SC-PT480EB-RQTX1126-B_eng.book Page 8 Monday, December 21, 2009 6:13 PM

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 29 30

Comments to this Manuals

No comments

Panasonic SCPT480 User Manual Page 8

Comments to this Manuals

Related products and manuals for Home cinema systems Panasonic SCPT480