Panasonic TC-32LE60 Operations Instructions download pdf (Page 15)

FAQs, etc.

Technical Information

Closed Caption (CC)

Aspect Ratio

Let you choose the aspect depending on the format of the received signal and your preference. (p. 11) (e.g.: in case

of 4:3 image)

•

For viewing Closed Caption of digital broadcasting, set the aspect ratio to FULL.

(If viewing with H-FILL, JUST, ZOOM or 4:3, characters will be cut off.)

•

The closed caption is not displayed when you use HDMI connection.

•

If analog connected equipment is used for displaying or recording, closed caption (CC) should be set On/Off on the

connected equipment.

The CC mode setting of the TV will not affect the analog input.

If a digital program is being output in analog format, the CC data will also be output in analog format.

If digital connected equipment is used for input, CC should be set On on either the connected equipment or the TV.

If CC is set On on both the connected equipment and the TV, captions from each unit will overlap.

•

FULL

•

JUST

FULL

JUST

Enlarges the 4:3 image horizontally to the screen’s side edges.

(Recommended for anamorphic picture)

Stretches to justify the 4:3 image to the four corners of the

screen.

(Recommended for normal TV broadcast)

•

H-FILL

•

4:3

H-FILL

Enlarges the 4:3 image horizontally to the screen’s side edges.

The side edges of the image are cut off.

Standard

(Note that “after image” of the side bar may occur from

displaying it for a long time.)

•

ZOOM

Enlarges the 4:3 image to the entire screen.

(Recommended for Letter Box)

•

Zoom adjust

Vertical image position and size can be adjusted in “ZOOM.”

Select “Zoom adjust” on the “Picture” menu. (p. 14-15)

V-Position: Vertical position adjustment Size: Vertical size adjustment

Side bar

•

To reset the aspect ratio (OK)

DIGITAL AUDIO OUT terminals

You can enjoy your home theater by connecting a Dolby Digital (5.1 channel) decoder and “Multi Channel” amplifier

to the DIGITAL AUDIO OUT terminals.

Caution

•

Depending on your DVD player and DVD-Audio software the copyright protection function may operate and disable

optical output.

•

External speakers cannot be connected directly to OUTPUT terminals.

•

When ATSC channel is selected, the output from the DIGITAL AUDIO OUT jack will be Dolby Digital. When NTSC

channel is selected, the output will be PCM.

HDMI connection

HDMI (high-definition multimedia interface) allows you to enjoy high-definition digital images and high-quality sound by connecting

the TV unit and the equipment.

HDMI-compatible equipment (*1) with an HDMI or DVI output terminal, such as a set-top box or a DVD player, can be connected

to the HDMI connector using an HDMI compliant (fully wired) cable.

•

HDMI is the world’s first complete digital consumer AV interface complying with a non-compression standard.

•

If the external equipment has only a DVI output, connect to the HDMI terminal via a DVI to HDMI adapter cable (*2).

•

When the DVI to HDMI adapter cable is used, connect the audio cable to the audio input terminal.

•

Audio settings can be made on the “HDMI in” menu screen. (p. 14-15)

Applicable audio signal sampling frequencies (L.PCM): 48 kHz, 44.1 kHz, 32 kHz

(*1): The HDMI logo is displayed on an HDMI-compliant equipment.

(*2): Enquire at your local digital equipment retailer shop.

Caution

•

Use with a PC is not assumed.

•

All signals are reformatted before being displayed on the screen.

•

If the connected equipment has an aspect adjustment function, set the aspect ratio to “16:9”.

•

This HDMI connector is “type A”.

•

Equipment having no digital output terminal may be connected to the input terminal of either “COMPONENT”, “S VIDEO”, or

“VIDEO” to receive analog signals.

•

The HDMI input terminal can be used with only the following image signals: 480i, 480p, 720p and 1080i

Match the output setting of the digital equipment.

•

For details of the applicable HDMI signals, see below.

horizontal

frequency (kHz)

vertical

frequency (Hz)

COMPONENT HDMI

525 (480) / 60i 15.73 59.94

525 (480) /60p 31.47 59.94

750 (720) /60p 45.00 59.94

1,125 (1,080) /60i 33.75 59.94

* Mark: Applicable input signal for Component (Y, PB, PR) and HDMI

•

Signals other than those shown above may not be displayed properly.

•

The above signals are reformatted for optimal viewing on your display.

Input signals that can be displayed

Note

Control with HDMI “HDAVI Control

”

HDMI connections to some Panasonic equipment allow you to enjoy easy playback.

•

Setup the equipment to enable this function. Read the manual of the equipment.

•

Switch the TV unit on again with the equipment on when connection or setup is changed.

•

This function may not work normally depending on the equipment condition.

•

The equipment can be operated by TV’s remote control with this function on even if TV is in Standby mode.

•

Image or sound may not be available for the first few seconds when the playback starts.

•

Image or sound may not be available for the first few seconds when Input mode is switched.

Note

•

480i (4:3), 480i (16:9), 480p (4:3), 480p (16:9) : FULL,

JUST, 4:3 or ZOOM

•

1080i / 720p : FULL, H-FILL, JUST or 4:3

•

When the signal is 720p/1080i, the aspect mode

automatically defaults to Full after turning off the TV,

after changing input mode, or after changed signal

resolution other than 720p/1080i.

Pic. mode

•

Vivid (default) : Provides enhanced picture contrast and sharpness for viewing in a well-lit room.

•

Standard : Recommended for normal viewing conditions with subdued room lighting.

•

Cinema : For watching movies in a darkened room. It provides a soft, film-like picture.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20

Comments to this Manuals

No comments

Panasonic TC-32LE60 Operations Instructions Page 15

Comments to this Manuals

Related products and manuals for LCD TVs Panasonic TC-32LE60