e HELP EnglishTX-32FSF607TX-32FSN608TX-32FST606TX-32FSX609TX-24FSW504 TX-32FSW504 TX-40FSW504 TX-43FSW504 TX-49FSW504TX-32FSW504S TX-43FSW504S TX-49FS
- 10 -•System Menu 283•Other Settings 284SupportHelp menu•Using Help menu 285FAQs•Picture 286•Digital TV 288•Analogue TV 290•Sound 291•HDMI
– Select User defined to set Test Transponder Frequency manually.– If you set to Single Cable, additional settings are required. Set SingleCable Vers
3. A confirmation screen is displayed and press OK to start Auto Setup. (Settings are made automatically.) ●When the operation is completed, the chan
Manual Tuning ●Normally use Auto Setup or Update Channel List to retune DVB channels. ●If tuning has not been done completely or for adjusting the dir
AnalogueSet Analogue channel manually after Auto Setup. ●Set Sound System and Colour System, and then perform this function. Normally set Colour Sy
DVB-via-IP (DVB-C)1. Select Frequency / Bandwidth / Modulation Type / Symbol Rate / FEC / Service ID and set with Cursor buttons or Numeric buttons
Update Channel ListBy updating the DVB channel list, you can add new channels, delete removed channels or change channel names and positions automatic
Signal ConditionSelects a channel and checks the signal condition with indicators. ●A good Signal Strength is not an indication of suitable signal rec
Other settingsFavourite NetworkSelects your favourite network for each broadcaster (only available in some countries). ●For DVB-C, DVB-TNew Channel Me
Selectable satellites Selectable satellites and dish alignment to tune DVB-S channelsTo ensure your satellite dish is correctly installed, please co
RecordingUSB HDD setupPreparationsYou can record the digital TV programmes to the connected USB HDD and enjoy playing back in various ways. ●Prepare t
How to use Meaning of signsOK :Letters enclosed in brackets indicate remote control buttons.Menu :Letters in cyan indicate on-screen display items.:
●The data recorded on the USB HDD with this TV can only be played back on this TV. You cannot play back its content with another TV (including the TV
Setting for USB HDDFormat and set up the USB HDD with this TV in order to use it for recording.All the USB devices recognised as a mass storage device
●To change the modeOK ●To edit USB HDD name (green) ●To format (red) ●To remove the USB HDD safely from the TV (yellow)= Note = ●You can only select
Recording current programmeOne Touch RecordingRecords the current programme to the USB HDD immediately. ●Confirm the remote control code is “73”. Watc
REW LIVE TVRecords the current programme to the USB HDD constantly within the maximum recordable time. ●Confirm the remote control code is “73”. Watch
●REW LIVE TV is stopped and the recorded content is deleted automatically in the following conditions: (Even if REW LIVE TV stops for the following c
Timer ProgrammingSetting Timer ProgrammingThis function allows you to select programmes that you want to record to the USB HDD. ●Not valid in Analogue
5. Select and set the item (channel, date, start time, end time). ● and can also be entered with Numeric buttons.(Example) !: Overlapped timer eve
Editing Timer Programming1. Display the menu with MENU.2. Select Timer > Timer Programming and press OK to access.3. Select the event. ●To change
Note ●TV Guide may also be used to set timer event. Watching > TV Guide > Timer Programming ●Timer Programming can store up to 15 events. ●Timer
Read firstBefore useLicenceEven if no special notation has been made of company or product trademarks, these trademarks have been fully respected.DVB
Technical informationUSB HDD USB HDD(for recording the digital TV programmes with this TV) ●The capacity of USB HDD that works with this TV is from
Media PlayerUsing Media PlayerInformationMedia Player allows you to enjoy photo, video or music recorded on the USB Flash Memory / network device, and
To insert or remove the USB Flash MemoryEnsure alignment is straight and complete when inserting or removing. ●To remove the USB Flash Memory safel
Selecting device / mode1. Insert the USB Flash Memory to the TV. Media Player > Using Media Player > Information ●To play back content in the U
= Note = ●Recorded TV is available for content recorded on the USB HDD with this TV. ●Select the appropriate device and content for playing back each
Network deviceYou can enjoy photo, video or music stored in the network devices. ●To enable this function, connect this TV to your home network. Netwo
Easy List ViewSelecting fileStill pictures / moving pictures recorded with digital camera or digital video camera are played back.Select the file in t
Repeat(Folder / File Repeat / Off)Playback repeatFolder:Playback repeat within the selected folderFile Repeat:Playback repeat of the selected one file
Filtering filesYou can filter the files as the content type. (Photo / Video)1. Display the option menu with OPTION.2. Select Filter and press OK to a
Mix Folder ViewSelecting fileDisplays the thumbnail of all files which are grouped by folder.Select the folder / file and press OK to start playback.
(b) Content owners use Microsoft PlayReady™ content access technology to protect their intellectual property, including copyrighted content. This devi
Repeat(Folder / File Repeat / Off)Playback repeatFolder:Playback repeat within the selected folderFile Repeat:Playback repeat of the selected one file
Filtering filesYou can filter the files as the content type. (Photo / Video / Music)1. Display the option menu with OPTION.2. Select Filter and press
Sorting filesYou can sort the files in alphabetical / date order.1. Display the option menu with OPTION.2. Select Sort and press OK to access.3. Sele
PlaybackPlayback Photo playback :To the previous photo :To the next photo :StopOK :Switch the playback mode (Single view / Slideshow). (blue) :Rotat
2) While the time seek bar is displayedPress / :Search approx. 10 secondsPress and hold / :Search rapidly3) Jump to the specified time point wit
Slideshow SettingsSet up the settings for Photo mode.1. Display the option menu with OPTION.2. Select Slideshow Settings with OK.3. Select one of th
2) Select File / Folder and press OK to set.File:The selected music file is registered.Folder:All the music files in the folder which contains the sel
Video SetupSet up the settings for Video mode.1. Display the option menu with OPTION.2. Select Video Setup with OK.3. Select one of the following it
Audio output settingsYou can enjoy the multi-channel sound via an amplifier connected to DIGITAL AUDIO or HDMI2 (ARC function) terminal. ●To confirm o
Recorded TV modeSelecting content ●For exclusive USB HDD ●To play back content in the USB HDD, ensure the connection and settings are completed. Recor
FeaturesHome“Home” is a gateway to the TV programmes, applications and connected devices.It provides you an easy way to access all the features. Home
Watching recorded TV Playback ●To operate playback : Manual skip– Press to skip forward approx. 30 seconds.– Press and hold to skip backward appro
●To confirm or change the current status (if available) Home > Live TV > Option Menu ●To return to listBACK/RETURN- 141 -
Grouping content1. Select the content to edit and press (blue) to tick in the content list.2. Display the option menu with OPTION.3. Select Create
Deleting content1. Select the content to edit and press (blue) to tick in the content list.2. Delete the content with (red).3. When a confirmati
Chapter ListYou can start playback from the chapter list you select.1. Display the chapter list with (yellow).2. Select the chapter and press OK to
Audio output settingsYou can enjoy the multi-channel sound via an amplifier connected to DIGITAL AUDIO or HDMI2 (ARC function) terminal. ●To confirm o
Connected deviceDevice handling caution ●Data modified with a PC may not be displayed. ●Do not remove the device while the TV is accessing data. Other
USB devices ●It is recommended to connect the device to the TV’s USB port directly. ●Some USB devices or USB HUB may not be used with this TV. ●You ca
Supported formatPhoto format Supported Photo formats ●JPEG (.jpg, .jpeg)Sub-sampling:4:4:4, 4:2:2, 4:2:0Image resolution (pixel):8 × 8 to 30 719 × 1
Video format Supported Video formats ●AVI (.avi)Video codec:H.264, MPEG1, MPEG2, MPEG4, VC-1, WMV9Audio codec:AAC, ADPCM, Dolby Audio (Dolby Digital
DVB-via-IPThis TV has DVB-via-IP client function and can connect to DVB-via-IP server or SAT>IP compatible servers to receive broadcast streaming.
●FLV (.flv)Video codec:H.264Audio codec:AAC, MP3 ●3GPP (.3gp, .3g2)Video codec:H.264, MPEG4Audio codec:AAC, HE-AAC ●PS (.mod, .mpg, .mpeg, .vob, .vro
Supported Subtitles formats ●MicroDVD, SubRip, TMPlayer (.srt, .sub, .txt) ●The video file and subtitles text file are inside the same folder, and
Music format Supported Music formats ●MP3 (.mp3) ●AAC / Apple Lossless (.m4a) ●Copy-protected files cannot be played back. ●FLAC (.flac) ●WMA / WMA
NetworkInternet contentInformationYou can access some specific websites supported by Panasonic, and enjoy internet content such as videos, games, comm
Selecting internet content1. Display Apps with APPS. ●For details of Apps Home > Apps ●Depending on the usage conditions, it may take a while to re
Note ●If you cannot access the internet content, check the network connections and settings. Network > Network connections Network > Network set
DLNAIn-House streamingThis TV is a DLNA Certified™ product.DLNA® (Digital Living Network Alliance) is a standard that makes DLNA Certified digital ele
Playback of sharing content on this TV with the DMC (Digital Media Controller) network equipmentYou can enjoy content stored in the media server by
Using DLNATo use DLNA® features, ensure the preparations of the media server, network connections and network settings are completed. Network > DLN
Network connectionsInternet connectionA broadband network environment is required to use internet services. ●If you do not have any broadband network
Easy MirroringYou can watch and display images of other devices (smartphone, etc.) on the TV screen using a mirroring function. You can also start the
DLNA connectionTo use DLNA features, you need a home network environment and you can operate the features without a broadband network environment. ●A
Wired connection (For DLNA and internet service) ETHERNET terminal LAN cable (Shielded) ●Use Shielded Twist Pair (STP) LAN cable. Hub / Router
Wireless connection (For DLNA) TV ●To use the TV as a wireless access point Network > Network settings > Custom - Wireless Access Point DLN
Note ●Ensure to use a LAN straight cable. ●Set up and connect equipment required for the network environment. You cannot make such settings on this TV
Network settingsNetwork ConnectionEnsure the connections are completed before starting network setup. Network > Network connections Quick setup -
Quick setup - Wired1. Display the menu with MENU.2. Select Network > Network Connection and press OK to access.3. Select Quick setup and press
Custom - WirelessEnsure the connections are completed before starting network setup. Network > Network connections1. Display the menu with MENU.2.
4. Enter the encryption key of the access point and press OK to set. ●You can set characters using Numeric buttons. ●Press BACK/RETURN to store.5. I
6. Select Network Status and press OK to access. Network > Network settings > Network Status7. Select Exit and press OK to set.- 168 -
Custom - WiredEnsure the connections are completed before starting network setup. Network > Network connections1. Display the menu with MENU.2. Se
HomeHomeInformation“Home” is a gateway to the TV programmes, applications and connected devices.Home is displayed by pressing HOME and it provides you
4. Select Network Status and press OK to access. Network > Network settings > Network Status5. Select Exit and press OK to set.= Note = ●To deac
Custom - Wireless Access PointYou can use the TV as a wireless access point and connect the network equipment without an access point. ●Confirm the PI
Network StatusDisplays and checks the network status (MAC Address, current network settings, etc.).1. Display the menu with MENU.2. Select Network &g
TV NameSets your favourite name for this TV.1. Display the menu with MENU.2. Select Network > TV Name and press OK to access.3. Enter characters
TV Remote App SettingsSets to control the TV with the equipment (smartphone, etc.) connected to your network.1. Display the menu with MENU.2. Select
Home Streaming(Always / Only when powered on)Enables sharing the TV programme and content of this TV with the network equipment (smartphone, etc.) in
Network Link SettingsSets to control the TV with devices connected to the network.1. Display the menu with MENU.2. Select Network > Network Link S
= Note = ●Depending on the area, this function may not be available. For details, consult your local Panasonic dealer.- 177 -
File Sharing SettingsNetwork Device ListLists the accessible network devices to play back the content in Media Player. Media Player > Using Media P
Mirroring SettingsSettings for the mirroring function Functions > Mirroring > Mirroring Settings- 179 -
= Note = ●Be sure to update the software when a software update notice is displayed on the TV screen. If the software is not updated, you may not be a
Control4 SettingsSettings for the Control4 function1. Display the menu with MENU.2. Select Network > Control4 Settings and press OK to access.3. S
Software UpdateAccesses the specific website to update the TV’s software if any updates are available.1. Display the menu with MENU.2. Select Network
New Software MessageSelects whether to give a notification message when new software is found via network or not.1. Display the menu with MENU.2. Sel
Terms of Service and SettingsDisplays the terms of service and settings.1. Display the menu with MENU.2. Select Network > Terms of Service and Set
PhotosSelecting fileEnsure the preparations of the media server, network connections and network settings are completed. Network > DLNA > In-Hou
Viewing photo Playback ●To operate Single view : To the previous photo : To the next photo : Stop (return to list)OK : Slideshow ●To display / hide
Using Slideshow1. Select the file from the thumbnail of photos for the first view.2. Start Slideshow with (red) and OK. ●To display / hide the oper
VideosSelecting fileEnsure the preparations of the media server, network connections and network settings are completed. Network > DLNA > In-Hou
Watching video PlaybackIf you have stopped the last playback halfway, a confirmation screen may be displayed to select whether to start from where y
3) Select the mode and press OK to set.Aspect1:Displays the content in original size.Aspect2:Displays the content enlarged without distortion.– Aspe
How to useFrom Home, you can access all the features such as TV programmes, applications and connected devices.1. Display Home with HOME.(Example) ●Pr
Video SetupSet up the settings for video file operations on this TV.1. Display the option menu with OPTION.2. Select Video Setup and press OK to acce
Subtitle Text Colour:Selects the colour of subtitles.Subtitle Text Position:Adjusts the position of subtitles on the screen.Subtitle Text Delay:Adjust
Audio output settingsYou can enjoy the multi-channel sound via an amplifier connected to DIGITAL AUDIO or HDMI2 (ARC function) terminal. ●To confirm o
MusicSelecting fileEnsure the preparations of the media server, network connections and network settings are completed. Network > DLNA > In-Hous
Playing music Playback ●To operate playback : Rewind : Fast forward : StopOK : Pause (displays the time seek bar) / Playback ●To jump to the specifi
Music SetupSet up the settings for music file operations on this TV.1. Display the option menu with OPTION.2. Select Music Setup > Repeat with OK.
Supported formatPhoto format Supported Photo formats ●JPEG (.jpg, .jpeg)Sub-sampling:4:4:4, 4:2:2, 4:2:0Image resolution (pixel):8 × 8 to 30 719 × 1
Video format Supported Video formats ●AVI (.avi)Video codec:H.264, MPEG1, MPEG2, MPEG4, VC-1, WMV9Audio codec:AAC, ADPCM, Dolby Audio (Dolby Digital
●FLV (.flv)Video codec:H.264Audio codec:AAC, MP3 ●3GPP (.3gp, .3g2)Video codec:H.264, MPEG4Audio codec:AAC, HE-AAC ●PS (.mod, .mpg, .mpeg, .vob, .vro
Supported Subtitles formats ●MicroDVD, SubRip, TMPlayer (.srt, .sub, .txt) ●The video file and subtitles text file are inside the same folder, and
- 2 -Read firstBefore use•Licence 12Features•Home 14•DVB-via-IP 15•Easy Mirroring 16HomeHome•Information 17•How to use 19•Pin to HOME 21•Opti
SettingYou can set up Home, tabs, etc.1. Display Home with HOME.2. Press repeatedly to display the setting tab.3. Select one of the following ite
Music format Supported Music formats ●MP3 (.mp3) ●AAC / Apple Lossless (.m4a) ●Copy-protected files cannot be played back. ●FLAC (.flac) ●WMA (.wma)
FunctionsMirroringHow to useYou can watch and display images of other devices (smartphone, etc.) on the TV screen using a mirroring function. Smartph
Mirroring SettingsYou can set items for the mirroring function.1. Display the menu with MENU.2. Select Network > Mirroring Settings and press OK.3
DVB-via-IPDVB-via-IP client connectionThis TV has DVB-via-IP client function and can connect to DVB-via-IP server or SAT>IP compatible servers to r
Wireless connection Built-in wireless LAN (Rear of the TV) Access point DVB-via-IP server Satellite dish / Terrestrial aerial / Cable= Note = ●
DVB-via-IP Server Selection Preparations ●Ensure the network connections and network settings are completed. Functions > DVB-via-IP > DVB-via-
Note ●Due to network conditions or certain broadcaster restrictions, this function may not be available. ●This function is not available when the TV i
VIERA Link “HDAVI Control™”Summary of VIERA LinkEnjoy additional HDMI Inter-Operability with Panasonic products which have “HDAVI Control™” function.V
VIERA Link (HDMI connection) ●Use a fully wired HDMI compliant cable. ●Connect the equipment supporting VIERA Link to the TV’s HDMI terminal via an
: For equipment which has “HDAVI Control 4 or later” function. VIERA Link (HDMI and Audio out connections) ●Use a fully wired HDMI compliant cable.
Pin to HOMEYou can add a shortcut for a frequently used feature on Home.1. Display Home with HOME.2. Select Live TV / Apps / Devices and press OK to a
Available features (HDMI and Audio out connections)Player theatre ●Easy playback ●Power on Link ●Power off Link ●Intelligent Auto Standby ●VIERA Li
VIERA Link Control of compatible equipmentThe following is the maximum number of compatible equipment that can be controlled by VIERA Link Control.
Preparations ●Connect the equipment supporting VIERA Link. ●For details of VIERA Link connections Functions > VIERA Link “HDAVI Control™” > Summ
Easy playbackAutomatic input switching - When the connected equipment is operated, the input mode is switched automatically.- 213 -
Power on LinkSet Power on Link to On in VIERA Link Settings to use this function.When the connected equipment is operated, the TV is automatically tur
Power off LinkSet Power off Link to On in VIERA Link Settings to use this function.When the TV is set to Standby mode, the connected equipment is also
Standby Power SaveSet Standby Power Save to On in VIERA Link Settings to use this function.The power consumption of the connected equipment in Standby
Intelligent Auto StandbySet Intelligent Auto Standby to On in VIERA Link Settings to use this function.When the TV is on, non-used connected equipment
VIERA Link ControlYou can control some functions of the connected equipment with this TV’s remote control by pointing at the TV’s signal receiver.1. D
= Note = ●If you cannot operate the equipment, check the settings and the equipment. Functions > VIERA Link “HDAVI Control™” > Summary of VIERA
Option menuYou can customise Home.1. Display the option menu with OPTION.2. Select one of the following items and press OK to access.Unpin from HOME
Speaker SelectionYou can control the theatre speaker with this TV’s remote control by pointing at the TV’s signal receiver.1. Display Apps with APPS.2
Note ●These functions may not work properly depending on the connected equipment. ●Image or sound may not be delivered for the first few seconds when
Child LockUsing Child LockYou can lock specific channels / AV input terminals to restrict access to them. When the locked channel / input is selected,
PIN numberYou can change the PIN number.1. Select Change PIN and press OK to access.2. Enter a new PIN number twice with Numeric buttons.= Note = ●Se
Parental RatingTo watch the DVB programme that has rating information on the selected age, enter the PIN number (depending on the broadcaster).1. Sele
Data Service ApplicationUsing Data Service ApplicationYou can enjoy Hybrid Broadcast Broadband TV application that may be provided via digital broadca
Privacy Setting1. Display the menu with MENU.2. Select Setup > Data Service Application > Privacy Setting and press OK to access.3. Select Low
Note ●A broadband network environment is required to fully use Hybrid Broadcast Broadband TV application. Ensure the network connections and network s
Common InterfaceCautionIf the encrypted message is displayed on the screen, the correct Common Interface (CI) Module and smart card that are required
Using Common InterfaceThe Common Interface Module menu provides access to software contained in Common Interface (CI) Modules. ●This function may not
Live TVHow to useLive TV is a gateway to the TV programmes.1. Display Home with HOME.2. Select Live TV.(Example)3. Press OK to access.(Example) ●For d
Shipping ConditionShipping ConditionResets the TV to its original condition (i.e. no channels tuned in).All settings other than USB Device Setup are r
Updating the TV SoftwareInformationA new version of software may be released for download to enhance the performance or operations of the TV.If there
Auto updateYou can update new software automatically.1. Display the menu with MENU.2. Select Setup > System Menu > System Update > Auto Upda
Manual updateYou can update new software manually.1. Display the menu with MENU.2. Select Setup > System Menu > System Update > System Updat
Setting charactersUsing Numeric buttonsYou can enter characters for free input items using Numeric buttons.Press Numeric buttons repeatedly until you
KeyboardKeyboard ●Keyboards requiring the drivers are not supported. ●To change the language type, set USB Keyboard Layout.1) Display the menu with M
SettingsSetting menuHow to useVarious menus allow you to make settings for the picture, sound, and other functions.1. Display the menu with MENU. ●Di
●To exit the menu screenEXIT ●To return to the previous screenBACK/RETURN= Note = ●Menu items and selectable options vary depending on the mode (TV m
PictureViewing ModeSelects your favourite picture mode for each input. Watching > For best picture > Viewing Mode- 238 -
Basic settingsBacklight, Contrast, Brightness, Colour, Tint, SharpnessAdjusts the levels of these options according to your personal preference. Watch
Option MenuConfirm or change the current status. ●Display the image full-screen to use this function.1. Display the option menu with OPTION.2. Selec
Ambient SensorAutomatic Brightness Control functionAdjusts picture settings automatically depending on ambient lighting condition. Watching > For b
HDR Brightness SettingYou can adjust and set up the details of HDR brightness. Watching > For best picture > HDR Brightness Setting- 241 -
Noise reduction settingsNoise ReductionReduces unwanted picture noise. Watching > For best picture > Noise reduction settingsMPEG RemasterReduce
Advanced SettingsYou can adjust and set up the detailed picture settings. Watching > For best picture > Advanced Settings- 243 -
Option SettingsSome features are not available on all models. Available menu items are displayed on your TV screen.Game ModeProvides suitable images f
3D-COMBMakes still or slow moving pictures more vivid. Watching > For best picture > Option Settings- 245 -
Screen SettingsAspectChanges the aspect ratio (image size). Watching > For best picture > Aspect16:9 OverscanSelects the screen area displaying
PICTURE Button SettingSets the viewing mode selection when pressing PICTURE. Watching > For best picture > Viewing Mode- 247 -
Copy AdjustmentCopies the picture settings of True Cinema or Custom to those of the other input mode or Viewing Mode. Watching > For best picture &
Reset to DefaultsResets the current Picture Viewing Mode to the default settings.- 249 -
Multi AudioSelects between alternative language or Audio Description for sound tracks (if available). ●This setting is not memorised and it returns to
SoundModeSelects your favourite sound mode for each input. Watching > For best audio > Sound mode- 250 -
Basic settingsBassAdjusts level to enhance or minimise lower, deeper sound output. Watching > For best audio > Basic settingsTrebleAdjusts level
Volume settingsSpeaker SelectionEnables controlling the theatre speaker with this TV’s remote control by pointing at the TV’s signal receiver. Watchin
Voice Guidance SettingsVoice GuidanceSet to On to enable voice guidance of the basic features (on-screen messages, etc.) for visually impaired users.
Audio DescriptionPreferred Audio TypeNarration settings for visually impaired users Watching > For best audio > Audio DescriptionVolumeAdjusts t
Advanced settingsMPXSelects multiplex sound mode (if available). Watching > For best audio > Advanced settingsAudio PreferenceSelects the initia
Reset to DefaultsResets the current Sound Mode to the default settings.- 256 -
NetworkNetwork ConnectionSets the network setting to use this TV in your network environment. Network > Network settings > Network Connection- 2
Network StatusDisplays and checks the network status (MAC Address, current network settings, etc.). Network > Network settings > Network Status-
TV NameSets your favourite name for this TV. Network > Network settings > TV Name- 259 -
Volume CorrectionAdjusts the volume of each individual channel or input mode.- 26 -
TV Remote App SettingsSets to control the TV from network equipment (smartphone, etc.). Network > Network settings > TV Remote App Settings- 260
Network Link SettingsSets to control the TV with devices connected to the network. Network > Network settings > Network Link Settings- 261 -
File Sharing SettingsNetwork Device ListLists the accessible network devices to play back the content in Media Player. Media Player > Using Media P
Mirroring SettingsSettings for the mirroring function Functions > Mirroring > Mirroring Settings- 263 -
Control4 SettingsSettings for the Control4 function Network > Network settings > Control4 Settings- 264 -
Other settingsSoftware UpdateChecks for available software updates from the Panasonic website. Network > Network settings > Software UpdateNew S
TimerOff TimerSets the duration of time until the TV automatically goes into Standby mode. Watching > Basic > Off Timer- 266 -
Timer ProgrammingSets a timer to record forthcoming programmes. Recording > Timer Programming > Setting Timer Programming- 267 -
Time ZoneAdjusts the time data. Watching > Basic > Adjusting time- 268 -
Auto StandbyAutomatically turns the TV to Standby mode for energy saving when no operation is performed for 4 hours. Watching > Basic > Energy s
AppsHow to useVarious applications (internet content, etc.) can be accessed easily from Apps.1. Display Home with HOME.2. Select Apps and press OK to
No signal Power offAutomatically turns the TV to Standby mode to prevent unnecessary power consumption when no signal is received and no operation is
SetupEco NavigationAutomatically sets the TV to the most suitable energy-saving mode. Watching > Basic > Energy saving functions- 271 -
USB Device SetupFormats the USB HDD or safely removes USB device. Recording > USB HDD setup > Setting for USB HDD- 272 -
Recording SetupSettings for the recording feature of the USB HDD Recording > Recording current programme > One Touch Recording Recording > Re
Child LockApplies access control for channels or inputs to prevent unwanted access. Functions > Child Lock > Using Child Lock- 274 -
Tuning MenuChannel List EditorYou can edit the channel list by adding / deleting and moving channels. Watching > Tuning and editing channels > C
Signal ConditionChecks the signal condition. Watching > Tuning and editing channels > Signal ConditionAntenna SystemSets the antenna system to u
LanguageOSD LanguageChanges language for on-screen displays. Watching > Basic > LanguagePreferred Audio 1 / 2Selects the first and second prefer
Display SettingsPreferred Subtitle TypeSelects the preferred subtitle type. Watching > Basic > SubtitleTeletextSelects teletext display mode. Wa
HDMI HDR SettingSet to On when the HDR device is connected to the TV. Watching > External equipment > HDMI HDR Setting- 279 -
Option menu1. Display the option menu with OPTION.2. Select one of the following items and press OK to access.Pin to HOME / Set as My App / Move / L
Common InterfaceSets to watch encrypted channels, etc. Functions > Common Interface > Using Common Interface- 280 -
VIERA Link SettingsVIERA LinkSets to use VIERA Link functions. Functions > VIERA Link “HDAVI Control™” > PreparationsPower on LinkSets to use Po
Data Service ApplicationServiceSets to use Hybrid Broadcast Broadband TV application. Functions > Data Service Application > Using Data Service
System MenuUSB Keyboard LayoutSelects the language that your USB Keyboard supports. Functions > Keyboard > KeyboardShipping ConditionResets all
Other SettingsPower Save(On / Off)Reduces brightness of the picture to economise on power consumption.Exchange Channel ListExports / Imports DVB-S Cha
SupportHelp menuUsing Help menu1. Display the menu with MENU.2. Select Help and press OK to access.3. Select TV Self Test / System Information / Devi
FAQsPictureBefore requesting service or assistance, please follow these simple guides to solve the problem. Also makes a diagnosis of picture problem
No image is displayed ●Check the correct input mode is selected. ●Check the setting of AV (COMPONENT / VIDEO) in Input Selection to match the signal b
Digital TVBefore requesting service or assistance, please follow these simple guides to solve the problem.If the problem still persists, please contac
Faulty dish message appears ●The satellite cable may be short-circuited or there may be connection problems of the cable. Check the cable and connecti
DevicesHow to useConnected devices (HDMI equipment, USB device, network device, etc.) can be accessed easily from Devices.1. Display Home with HOME.2.
Analogue TVBefore requesting service or assistance, please follow these simple guides to solve the problem.If the problem still persists, please conta
SoundBefore requesting service or assistance, please follow these simple guides to solve the problem. Also makes a diagnosis of sound problem in TV Se
HDMIBefore requesting service or assistance, please follow these simple guides to solve the problem.If the problem still persists, please contact your
NetworkBefore requesting service or assistance, please follow these simple guides to solve the problem.If the problem still persists, please contact y
Cannot operate internet content ●Check the connections and settings. Network > Network connections > Internet connection Network > Network se
OtherBefore requesting service or assistance, please follow these simple guides to solve the problem.If the problem still persists, please contact you
LED does not turn to red in Standby mode ●LED turns to orange in Standby mode in the following conditions:– Recording is in progress.– Timer Program
Detailed informationSupport information about the application, optional devices, operation, etc. may be found on the following website.http://panasoni
MaintenanceCare and CleaningFirst, remove the mains plug from the mains socket. Display panel, Cabinet, PedestalRegular care:Gently wipe the surface
ver.3.000
- 3 -•Adjusting time 43•Language 44External equipment•External connection 45•Watching external input 49•Operating with TV’s remote control 51
Option menu1. Display the option menu with OPTION.2. Select one of the following items and press OK to access.Pin to HOME / Accessibility / Switch t
WatchingBasicBasic connectionPlease ensure that the unit is disconnected from the mains socket before attaching or disconnecting any cables. ●External
Aerial Terrestrial / cable terminal RF cable Terrestrial aerial / Cable ●For DVB-C, DVB-T, Analogue DVD Recorder / Blu-ray Recorder, etc. Ter
Set top box HDMI terminal HDMI cable Set top box Cable= Note = ●For details of DVB-via-IP connections Functions > DVB-via-IP ●For details of
Selecting channel1. Select the mode with TV.DVB-S / DVB-C / DVB-T / DVB-via-IP / Analogue ●Selectable modes vary depending on the channels stored.2.
To watch pay-TV ●For details of the encrypted channels Functions > Common Interface > Using Common Interface ●Consult the operator / broadcas
Information bannerDisplay information banner with . ●Also appears when changing a channel.(Example) Channel position and name Channel type (Radio,
:Teletext service available :Multiple audio available :Multiple video available :Multiple audio and video availableStereo, Mono:Audio mode :Data serv
SubtitleDisplay / hide subtitles (if available) with STTL. ●To select the preferred language for DVB subtitles (if available), set Preferred Subtitles
Last viewSwitch to a previously viewed channel or input mode easily with LAST VIEW. ●Press again to return to the current view.= Note = ●Switching cha
- 4 -•Teletext mode 91•Teletext Character Set 92Tuning and editing channels•Setting menu 93•Channel List Editor 94•Favourites Editor 97•Auto S
Off TimerSwitch to TV Standby mode automatically after a fixed period.1. Display the menu with MENU.2. Select Timer > Off Timer and press OK to ac
Energy saving functionsThe TV can be eco-friendly using energy-saving functions.The TV goes into Standby mode in the following conditions: ●Eco Naviga
No signal Power off1. Display the menu with MENU.2. Select Timer > No signal Power off and press OK to access.3. Select On / Off and press OK t
Adjusting timeAdjusts the time data.1. Display the menu with MENU.2. Select Timer > Time Zone and press OK to access.3. Set the item and press OK
Language1. Display the menu with MENU.2. Select Setup > Language and press OK to access.3. Select one of the following items and press OK to acce
External equipmentExternal connectionThese diagrams show our recommendations for connection of your TV to various pieces of equipment. For other conne
AV devices AV (COMPONENT) terminals Component cables DVD Player, etc. AV (VIDEO) terminals Composite cables Camcorder / Game equipment- 46 -
USB devices USB port USB cable USB HDD, etc.= Note = ●It is recommended to connect the device to the TV’s USB port directly. ●You cannot use two
Headphones Headphone jack 3.5 mm stereo mini plug Headphones ●To adjust volume, set Headphone Volume. Watching > For best audio > Volume se
Watching external inputConnect the external equipment (VCR, DVD, etc.) and you can watch through the input.1. Display the input selection menu with A
- 5 -Easy List View•Selecting file 126•Filtering files 128Mix Folder View•Selecting file 129•Filtering files 131•Sorting files 132Playback•
Playing Time DisplaySet to On to display a time period of continuous use in Game Mode on the top right of the screen every 30 minutes.1. Display t
Operating with TV’s remote controlYou can operate the content in Media Player / media server, recording functions or the connected equipment with the
2. Enter the appropriate code as follows with Numeric buttons. ●Codes for each product and features70: DVD Recorder, DVD Player, Blu-ray Disc Player7
HDMI featuresHDMI (high-definition multimedia interface) is the world’s first complete digital consumer AV interface complying with a non-compression
= Note = ●Audio settings can be made on HDMI Audio Format / HDMI Input in the Sound Menu. Watching > For best audio > Advanced settings ●If the
HDMI HDR Setting1. Display the menu with MENU.2. Select Setup > HDMI HDR Setting and press OK to access.3. Set the item and press OK to store.HDM
Valid input signals COMPONENT, HDMISignal name COMPONENT HDMI525 (480) / 60i, 60p ○ ○625 (576) / 50i, 50p ○ ○750 (720) / 60p, 50p ○ ○1 125 (1 080) /
For best pictureViewing Mode1. Display the menu with MENU.2. Select Picture > Viewing Mode and press OK to access.3. Select the mode and press OK
●The following items can be adjusted and stored for each mode.Backlight / Contrast / Brightness / Colour / Tint / Sharpness / Colour Temperature / Vi
AspectChanges the aspect ratio (image size). To change the aspect ratio manually1. Display the menu with MENU.2. Select Picture > Screen Setting
- 6 -DLNA•In-House streaming 156•Using DLNA 158Network connections•Internet connection 159•DLNA connection 160•Note 163Network settings•Netw
Aspect Control SignalProgrammes usually contain an “Aspect Control Signal”. (Widescreen signal, Control signal through HDMI terminal)In Auto mode, asp
●AV (COMPONENT) terminals (WSS only)Valid input signal format:625 (576) / 50i, 50pInvalid input signal format:525 (480) / 60i, 60p750 (720) / 60p, 50
Basic settings1. Display the menu with MENU.2. Select Picture and press OK to access.3. Select one of the following items and press OK to access.Bac
Ambient Sensor1. Display the menu with MENU.2. Select Picture > Ambient Sensor and press OK to access.3. Select On / Off and press OK to set.Ambie
HDR Brightness Setting1. Display the menu with MENU.2. Select Picture > HDR Brightness Setting and press OK to access.3. Select one of the follow
Noise reduction settings1. Display the menu with MENU.2. Select Picture > Noise Reduction / MPEG Remaster and press OK to access.3. Set the item
Advanced SettingsYou can adjust and set up the detailed picture settings when Viewing Mode is set to Cinema, True Cinema or Custom. The settings in Tr
Colour GamutColour Gamut(Auto / Normal / Native)Reproduces image colour precisely according to the colour gamut standards.Auto:Automatically adjust
Colour ManagementR-Hue / R-Saturation / R-LuminanceAdjusts the picture hue / saturation / luminance of red areas.G-Hue / G-Saturation / G-Luminance
GammaGammaSwitches the gamma curve. ●Please note the numerical values are reference for the adjustment.More Detailed AdjustmentAdjusts more detaile
- 7 -•Playing music 194•Music Setup 195Supported format•Photo format 196•Video format 197•Music format 200FunctionsMirroring•How to use 201
Option SettingsSome features are not available on all models. Available menu items are displayed on your TV screen.1. Display the menu with MENU.2. S
HDMI Content Type(Graphics / Photos / Auto / Off)Adjusts the picture settings of each HDMI input according to the selected content type.Auto:Automatic
3D-COMB(On / Off)Makes still or slow moving pictures more vivid. ●Occasionally, while viewing still or slow moving pictures, colour patterning may be
Screen Settings1. Display the menu with MENU.2. Select Picture > Screen Settings and press OK to access.3. Select one of the following items and
Copy AdjustmentCopies the picture settings of True Cinema or Custom to those of the other input mode or Viewing Mode.1. Display the menu with MENU.2.
For best audioSound mode1. Display the menu with MENU.2. Select Sound > Mode and press OK to access.3. Select the mode and press OK to set.Mode(S
Basic settingsSome features are not available on all models. Available menu items are displayed on your TV screen.1. Display the menu with MENU.2. Se
Stadium surround:Provides a dynamic sound for watching sports by improving spatial effects. ●This function is effective only for the sound from TV spe
Volume settings1. Display the menu with MENU.2. Select Sound and press OK to access.3. Select one of the following items and press OK to access.Spea
Auto Gain Control(On / Off)Automatically regulates large sound level differences between channels and inputs.Volume CorrectionAdjusts the volume of ea
- 8 -•Note 227Common Interface•Caution 228•Using Common Interface 229Shipping Condition•Shipping Condition 230Updating the TV Software•Informati
Voice Guidance Settings1. Display the menu with MENU.2. Select Sound > Voice Guidance Settings and press OK to access.3. Select one of the follow
Audio Description1. Display the menu with MENU.2. Select Sound > Audio Description and press OK to access.3. Select one of the following items an
Advanced settings1. Display the menu with MENU.2. Select Sound and press OK to access.3. Select one of the following items and press OK to access.MP
●HE-AAC is a perceptual coding method used to compress digital audio for efficient storage and transmission. ●MPEG is an audio compression method tha
PCM:Digital audio signal is output as PCM.PCM Optical LevelAdjusts the audio level of PCM output from DIGITAL AUDIO and HDMI2 (ARC function) terminals
TV GuideUsing TV GuideTV Guide - Electronic Programme Guide (EPG) provides an on-screen listing of the programmes currently broadcast and the forthcom
2) Select View and press OK to watch.– To use Timer Programming Watching > TV Guide > Timer Programming ●To the previous day (red) ●To the next
Timer ProgrammingThis function allows you to select programmes that you want to record to the USB HDD.1. Display TV Guide with GUIDE.2. Select the fo
● is displayed on the timer event if Signal Supported Recording is set.= Note = ●If you edit the start time or end time of a signal supported recordi
TeletextViewing Teletext1. Switch to teletext with TEXT. ●Displays the index page (content varies depending on the broadcaster). ●Current / sub page
- 9 -•Basic settings 251•Volume settings 252•Voice Guidance Settings 253•Audio Description 254•Advanced settings 255•Reset to Defaults 256Net
Watch TV and teletext in two windows at once1. Press MENU twice.2. Set Picture and text to On / Off. ●Operations can be made only in teletext scree
Teletext modeTeletext services are the text information provided by the broadcaster. ●The features may vary depending on the broadcaster.1. Display t
Teletext Character SetSelects teletext language font.1. Display the menu with MENU.2. Select Setup > Display Settings > Teletext Character Set
Tuning and editing channelsSetting menuYou can retune channels, edit channel lists, create your favourite channel lists, etc.1. Select the mode with
Channel List Editor Edit DVB channelsYou can edit the list of All DVB Channels by adding / deleting and moving channels. ●Channels not in all DVB ch
2. Press BACK/RETURN and OK to store. ●To exchange channel list (DVB-S)1) Display the menu with MENU.2) Select Setup > Other Settings > Exchang
2) Enter characters (maximum 5 characters) with Cursor buttons or Numeric buttons, and press OK to set.3) Press BACK/RETURN to store.= Note = ●If a V
Favourites Editor List favourite DVB channelsCreate your favourite channel lists from various broadcasters (up to 4: Favourites 1 to 4).The favourit
Edit DVB favourites listYou can edit the favourites list while the cursor is on the channel in the favourites list. ●To move the channel1) Select
Auto SetupAutomatically retunes the channels received in the area. ●This function is available if channel tuning is already performed. ●Only the selec
Comments to this Manuals