Panasonic TX65CZ952B Operations Instructions download pdf (Page 327)

Digital TV

Before requesting service or assistance, please follow these simple guides to

solve the problem.

If the problem still persists, please contact your local Panasonic dealer for

assistance.

Block noise, frozen or disappearing image occurs / Some channels cannot be

tuned

●

Check the position, direction and connection of the aerial or dish.

●

Check Signal Condition. If the level of Signal Quality is low, the DVB

signal is weak. Connecting the aerial to the TV directly may improve signal

quality than connecting the aerial through the equipment (Set top box,

DVD, etc.).

Watching > Tuning and editing channels > Signal Condition

Watching > Basic > Basic connection

●

Weather conditions affect signal reception (heavy rain, snow, etc.), in

particular in poor reception areas. Even during good weather, the high

pressure can cause poor reception of some channels.

●

Due to the digital reception technologies involved, quality of the digital

signals may be relatively low in some cases, despite good reception of

analogue channels.

●

Turn the TV off with Mains Power On / Off switch, then turn it on again.

Freesat Auto Setup cannot be done completely

●

Check connections and dish alignment. The dish needs to be pointing at

Astra2 at 28.2° East, and Eurobird1 at 28.5° East.

●

If the problem persists, consult your Freesat registered retailer or call

Freesat (UK) Ltd on 08450 990 990 or visit www.freesat.co.uk

Faulty dish message appears

●

The satellite cable may be short-circuited or there may be connection

problems of the cable. Check the cable and connection and then turn the

TV off with Mains Power On / Off switch, and turn it on again.

●

If the message persists, consult a dish installer for checking the dish and

cable.

- 327 -

1 2 ... 322 323 324 325 326 327 328 329 330 331 332 ... 343 344

No comments

Panasonic TX65CZ952B Operations Instructions Page 327