Panasonic TXL32D28EP Operations Instructions download pdf (Page 91)

Frequently Asked Questions ●

Technical Information ●

FAQs, etc.

FAQs

Block noise, frozen or

disappearing image occurs

in DVB mode / White spots

or shadow image (ghosting)

occurs in Analogue mode /

Some channels cannot be

tuned

Keep the space between the TV and RF cable.●

Check the position, direction and connection of ●

the aerial or dish.

Check “Signal Condition” (p. 41). If “Signal ●

Quality” is displayed in red, the DVB signal is

weak.

Weather conditions will affect signal reception ●

(heavy rain, snow, etc.), in particular in poor

reception areas. Even during good weather,

the high pressure can cause poor reception of

some channels.

Due to the digital reception technologies ●

involved, quality of the digital signals may be

relatively low in some cases, despite good

reception of analogue channels.

Turn the TV off with the Mains power On / Off ●

switch, and then on again.

If problem persists, consult your local dealer or ●

service provider for the availability of services.

DVB-S Auto Setup cannot

be done completely

Check connections and dish alignment. (p. 35)●

If the problem persists, consult your local dealer.

●

Neither image nor sound is

produced

Is the TV in AV mode?●

Check the correct AV input mode is selected.●

Check the mains lead is plugged into the ●

socket outlet.

Has the TV been turned On?●

Check the Picture Menu (p. 28) and volume.●

Check all required cables and connections are ●

firmly in place.

Auto aspect

Auto aspect is designed to provide you with the ●

best ratio to fill the screen. (p. 86)

Press the ASPECT button if you would like to

●

change the aspect ratio manually (p. 18).

S-Video / black and white

picture

Check that the output of the external equipment

●

matches the input of the TV. If the output of the

external equipment is set to S-Video, the TV

must also be set to S-Video (p. 24).

No programmes shown on TV

Guide

Check the digital transmitter.●

Adjust the direction of the aerial or dish to another ●

transmitter installed nearby.

Check the analogue broadcast.●

If the image quality is poor, check the aerial and consult

your local dealer.

Input mode, i.e. EC/AV1 remains

on the screen

Press the ● button to clear these.

Press again to redisplay.

Q-Link function does not work

Confirm SCART cable and connection. ●

Also set “AV1 / AV2 out” in the Setup Menu (p. 30).

“VIERA Link” function does

not work and an error message

appears

Confirm the connection. (p. 76 and p. 77)●

Turn the connected equipment on and then switch the ●

TV on. (p. 79)

Recording does not start

immediately

Check the settings of the recorder. For details, read the ●

manual of the recorder.

There may be red spots, blue

spots, green spots and black

spots on the screen

This is a characteristic of liquid crystal panels and is ●

not a problem. The liquid crystal panel is built with very

high precision technology giving you fine picture details.

Occasionally, a few non-active pixels may appear on

the screen as a fixed point of red, green, blue or black.

Please note this does not affect the performance of

your LCD.

Before requesting service or assistance, please follow these simple guides to resolve the problem.

If the problem still persists, please contact your local Panasonic dealer for assistance.

1 2 ... 86 87 88 89 90 91 92 93 94 95 96

Comments to this Manuals

No comments

Panasonic TXL32D28EP Operations Instructions Page 91

Comments to this Manuals

Related products and manuals for LCD TVs Panasonic TXL32D28EP