eHELPEnglishTX-LR47WT60TX-LR55WT60
- 10 -•System Menu 217•Other Settings 217SupportFAQs•Picture 218•Digital TV 220•Analogue TV 221•Sound 222•3D 223•HDMI 224•Network 225•Othe
- 100 - Wired connection (For DLNA and internet service) ETHERNET terminal LAN cable (Shielded) ●Use the Shielded Twist Pair (STP) LAN cable. Hub
- 101 -Note ●Ensure to use a LAN straight cable. ●Set up and connect equipment required for the network environment. You cannot make such settings on
- 102 -Network settingsNetwork ConnectionEnsure the connections are completed before starting network setup. Home network Network connections Quic
- 103 -7. Select Exit with / and press OK to set ●To set manually Home network Network settings Custom - Wireless Quick setup - Wired1. Dis
- 104 - ●For Manual1) Press (yellow)2) You can set up SSID, security type, encryption type, and encryption key manually3) Follow the on-screen inst
- 105 -Proxy Settings ●It is not required for normal household use. ●Some internet services may not be available depending on the proxy settings.Proxy
- 106 -Custom - WiredEnsure the connections are completed before starting network setup. Home network Network connections1. Display the menu with M
- 107 -Proxy Settings ●It is not required for normal household use. ●Some internet services may not be available depending on the proxy settings.Proxy
- 108 -Custom - Wireless Access PointYou can use the TV as a wireless access point and connect the network equipment without an access point. ●Confirm
- 109 -Network StatusDisplays and checks the network status (MAC Address, current network settings, etc.).1. Display the menu with MENU2. Select Netw
- 11 -Watchingmy Home ScreenInformation“my Home Screen” is a gateway to the TV, applications, and more.It provides easy access to special features suc
- 110 -Network Link SettingsSets to control the TV with devices connected to the network.1. Display the menu with MENU2. Select Network Network Link
- 111 -= Note = ●Depending on the area, this function may not be available. For details, consult your local Panasonic dealer.Software UpdateAccesses t
- 112 -PhotosSelecting fileEnsure the preparations of the media server, network connections and network settings are completed. Home network DLNA
- 113 -Viewing photo PlaybackPhotos are displayed one at a time. ●To operate Single view : To the previous photo : To the next photo : Stop (return
- 114 -Transition Effect(Off / Fade / Dissolve / Motion / Random)Selects the transition effect for switching the photo during the slideshow.Fade:The n
- 115 -VideosSelecting fileEnsure the preparations of the media server, network connections and network settings are completed. Home network DLNA
- 116 -Watching video PlaybackIf you have stopped the last playback halfway, the confirmation screen is displayed to select whether to start from wh
- 117 -Video SetupSet up the settings for video file operations on this TV.1. Display the option menu with OPTION2. Select Video Setup with / and
- 118 -Audio output settingsYou can enjoy the multi-channel sound via an amplifier connected to DIGITAL AUDIO or HDMI2 (ARC function) terminal. ●To co
- 119 -MusicSelecting fileEnsure the preparations of the media server, network connections and network settings are completed. Home network DLNA I
- 12 -How to useHome Screen provides access to special features such as the Media Player, TV, internet content, data services, communication tools, et
- 120 -Playing music Playback ●To operate playback : Rewind : Fast forward : StopOK : Pause / Playback ●To display / hide the operation guide ●To th
- 121 -DIGA RecorderControlling DIGA RecorderEnsure the preparations of the media server, network connections and network settings are completed. Home
- 122 -Technical informationPhoto format Supported Photo formats ●JPEG (.jpg, .jpeg, .mpo)Image resolution (pixel):8 × 8 to 30,719 × 17,279Sub-sampl
- 123 -Video format Supported Video formats ●AVCHD (.mts)Video codec:H.264 BP/MP/HPAudio codec:Dolby Digital ●AVCHD Standard Ver. 2.0 (AVCHD 3D, AVC
- 124 - ●MKV (.mkv)Video codec:H.264 BP/MP/HP, MPEG1, MPEG2, MPEG4 SP/ASPAudio codec:AAC, Dolby Digital, Dolby Digital Plus, DTS core, HE-AAC, MPEG Au
- 125 - ●PS (.mod, .mpg, .mpeg, .vob, .vro)Video codec:MPEG1, MPEG2Audio codec:Dolby Digital, LPCM, MPEG Audio ●TS (.mts, .m2ts, .tp, .trp, .ts, .tts)
- 126 -Music format Supported Music formats ●MP3 (.mp3) ●AAC, Apple Lossless (.m4a) ●Copy-protected files cannot be played back. ●WMA (.wma) ●Copy-p
- 127 -Media PlayerUsing Media PlayerInformationMedia Player allows you to enjoy photo, video or music recorded on an SD Card and a USB Flash Memory w
- 128 - ●Folder and file names may be different from those on the digital camera or digital video camera used. To insert or remove the SD CardGently
- 129 -Selecting device / mode1. Insert the SD Card or USB Flash Memory to the TV ●When you insert the SD Card, Media Player will start automatically
- 13 -SettingsSelect the setup menu from the tool guide on the top of the screen, or use coloured button to display the setup menu.(Example) Home Sc
- 130 -= Note = ●You may also access each mode directly from APPS List. Functions APPS List How to use ●Recorded TV is available for contents reco
- 131 -Photo modeSelecting fileSelect the file in the thumbnail view with / / / and press OK to start playback. : Error display ●To change the
- 132 -Viewing photo Playback ●To operate Single view : To the previous photo : To the next photo : Stop (return to thumbnail)OK : Slideshow ●To dis
- 133 -Multi Shot 3DThis TV can create a 3D photo using a pair of photos in the SD Card and save it into the same SD Card. ●This TV can also create a
- 134 -Using slideshowSlideshow ends when all photos within the current thumbnail are viewed.1. Select the file from the thumbnail of photos for the
- 135 -Frame(Off / Multi / Collage / Drift (+ calendar) / Drift / Gallery (+ calendar) / Gallery / Cinema)Selects the frame type of the slideshow.Mult
- 136 -Transition Effect(Off / Fade / Dissolve / Motion / Random)Selects the transition effect for switching photos during the slideshow.Fade:The next
- 137 -Interval(Long / Normal / Short)Selects slideshow interval. ●Not valid when Frame is set to Drift, Gallery, Cinema or when Transition Effect is
- 138 -= Note = ●Picture quality may be degraded depending on the slideshow settings. ●Picture setting may not work depending on the slideshow setting
- 139 -Video modeSelecting file1. Select the title in the thumbnail view with / / / : Error display : The file does not support thumbnail view
- 14 - SettingsYou can customise any Home Screen. (For example, changing the wallpaper, renaming freely, editing applications, setting the screen la
- 140 -Watching video Playback from the selected scene in the title (SD-Video or AVCHD)Playback of the selected scene will start and continue until
- 141 - ●To change aspect1) Display Aspect Selection list with ASPECT2) Select the mode with / and press OK to setAspect1:Displays the content enl
- 142 -SubtitleDisplay / hide subtitles (if available). ●This function is available during playback.Subtitle TextSelects the font type to display subt
- 143 -Recorded TV modeSelecting content ●For exclusive USB HDD ●To play back contents in the USB HDD, ensure the connection and settings are complete
- 144 -Watching recorded TV Playback ●To operate playback : Manual skip– Press to skip forward approx. 30 seconds.– Press and hold to skip backwar
- 145 - ●To confirm or change the current status (if available) Watching Basic Option Menu ●To return to listBACK/RETURN ●The recorded content may
- 146 -Changing deviceYou can change the current device to another device directly in the same mode when two or more available devices are connected.1
- 147 -Audio output settingsYou can enjoy the multi-channel sound via an amplifier connected to DIGITAL AUDIO or HDMI2 (ARC function) terminal. ●To co
- 148 -Music modeSelecting file1. Select the folder in the thumbnail view with / / / 2. Start playback with (red) ●For supported file format
- 149 -Playing music Playback of the selected file in the folder1. Select the folder with / / / and press OK to access2. Select the file w
- 15 -BasicSatellite connectionPlease ensure that the unit is disconnected from the mains socket before attaching or disconnecting any cables. ●For DV
- 150 -Technical informationDevice handling caution ●Data modified with a PC may not be displayed. ●Do not remove the device while the TV is accessing
- 151 -USB devices ●It is recommended to connect the USB HDD or USB Flash Memory to the TV’s USB ports directly. ●Some USB devices or USB HUB may not
- 152 -Photo format Supported Photo formats ●JPEG (.jpg, .jpeg, .mpo)Image resolution (pixel):8 × 8 to 30,719 × 17,279Sub-sampling:4:4:4, 4:2:2, 4:2
- 153 -Video format Supported Video formats ●AVCHD (.mts)Video codec:H.264 BP/MP/HPAudio codec:Dolby Digital ●AVCHD Standard Ver. 2.0 (AVCHD 3D, AVC
- 154 - ●MKV (.mkv)Video codec:H.264 BP/MP/HP, MPEG1, MPEG2, MPEG4 SP/ASPAudio codec:AAC, Dolby Digital, Dolby Digital Plus, DTS core, HE-AAC, MPEG Au
- 155 - ●PS (.mod, .mpg, .mpeg, .vob, .vro)Video codec:H.264 BP/MP/HP, MPEG1, MPEG2, VC-1Audio codec:AAC, Dolby Digital, Dolby Digital Plus, HE-AAC, L
- 156 -Music format Supported Music formats ●MP3 (.mp3) ●AAC, Apple Lossless (.m4a) ●Copy-protected files cannot be played back. ●WMA / WMA Pro (.wm
- 157 -FunctionsAPPS ListInformationVarious applications (internet contents, network contents, Media Player, etc.) can be accessed easily from APPS Li
- 158 -How to useYou can access special features such as internet contents, network contents, Media Player, etc. from APPS List.1. Display APPS List w
- 159 -SettingsYou can customise APPS List (screen settings, etc.).1. Display APPS List with APPS2. Select the icon for settings on APPS List with /
- 16 - Single tunerConnect the satellite IN 1 terminal to the satellite dish. ●Watching or recording 2 DVB-S programmes simultaneously, etc. are not
- 160 -Multi WindowInformationDisplays two windows at once for viewing the TV programmes or external input (AV, Component or HDMI) as shown below (exa
- 161 -How to useYou can select a channel while watching another programme or external input.1. Display the menu with MENU2. Select Picture Screen S
- 162 - Watching View(Example) Main screen TV mode / input mode / channel position and name Sub screen ●Press / to select the screen to opera
- 163 -Note ●Ensure that Dual Tuner Mode is set to On in Auto Setup to display DVB-S mode both in two windows. Watching Tuning and editing channels
- 164 -VIERA Link “HDAVI Control™”Summary of VIERA LinkEnjoy additional HDMI Inter-Operability with Panasonic products which have “HDAVI Control™” fun
- 165 - VIERA Link (HDMI connection) ●Use a fully wired HDMI compliant cable. ●Connect the equipment supporting VIERA Link to the TV’s HDMI terminal
- 166 - VIERA Link (HDMI and Audio out connections) ●Use a fully wired HDMI compliant cable. ●Connect the equipment supporting VIERA Link to the TV’
- 167 - HD Video Camera / LUMIX Camera with VIERA Link function: If the connected equipment has “HDAVI Control 5” function, you do not have to use th
- 168 - VIERA Link Control of compatible equipmentThe following is the maximum number of compatible equipment that can be controlled by VIERA Link C
- 169 -Easy playbackAutomatic input switching - When the connected equipment is operating, the input mode is switched automatically.Power on LinkSet P
- 17 -Basic connectionPlease ensure that the unit is disconnected from the mains socket before attaching or disconnecting any cables. Aerial Terres
- 170 -Intelligent Auto StandbySet Intelligent Auto Standby to On in the Setup Menu to use this function. Settings Setup VIERA Link SettingsWhen t
- 171 - If multiple recorders or players are connectedEach recorder / player is numbered. The number is given from the TV’s lower number of HDMI ter
- 172 -Speaker SelectionYou can control the theatre speaker with this TV’s remote control by pointing at the TV’s signal receiver.1. Display APPS List
- 173 -Note ●These functions may not work properly depending on the connected equipment. ●Image or sound may not be delivered for the first few second
- 174 -Child LockUsing Child LockYou can lock specific channels / AV input terminals to restrict access to them. When the locked channel / input is se
- 175 -PIN numberYou can change the PIN number.1. Select Change PIN with / and press OK to access2. Enter a new PIN number twice with the numeric
- 176 -Data Service ApplicationUsing Data Service ApplicationYou can enjoy Hybrid Broadcast Broadband TV application that is one of the interactive da
- 177 -Note ●To use Hybrid Broadcast Broadband TV application fully, you need a broadband network environment. Ensure the network connections and netw
- 178 -Common InterfaceCautionIf the encrypted message is displayed on the screen, the correct Common Interface (CI) Module and smart card that are re
- 179 -Using Common InterfaceThe Common Interface Module menu provides access to software contained in Common Interface (CI) Modules. ●This function m
- 18 - DVD Recorder / VCR and Set top box HDMI terminal HDMI cable Set top box Cable AV1 (SCART) terminal SCART cable– AV1 (SCART) adaptor (su
- 180 -Shipping ConditionShipping ConditionResets the TV to its original condition (i.e. no channels tuned in).All settings other than USB Device Setu
- 181 -Updating the TV SoftwareInformationA new version of software may be released for download to enhance the performance or operations of the TV.If
- 182 -= Note = ●Download may take a few hours. ●During software download and update, DO NOT switch off the TV. ●A notification message may be a remin
- 183 -Setting charactersUsing numeric buttonsYou can enter characters for free input items using numeric buttons.Press the numeric button repeatedly
- 184 -Built-in CameraUsing built-in CameraYou can use the built-in Camera as a communication tool for specific applications such as face recognition,
- 185 -Voice ControlPreparationsVoice Control function allows you to operate the TV (e.g. selecting a channel), search the content from various featur
- 186 -= Note = ●To use Voice Control function fully, you need a broadband network environment, because this function accesses the speech recognition
- 187 -Bluetooth devicesBluetooth SetupYou can use Bluetooth keyboards and Bluetooth audio devices (headphones, etc.) with this TV by setting Blueto
- 188 - ●To adjust the volume of this audio device, set Headphone Volume. Settings Sound Volume settings ●Settings in the Sound Menu may not be ef
- 189 -Keyboard / GamepadKeyboard ●Keyboards requiring the drivers are not supported. ●To change the language type, set Keyboard Layout. Settings Se
- 19 -Selecting channel1. Display the TV Selection screen with TV2. Select the mode with / and press OK to setDVB-S / DVB-C / DVB-T / Analogue ●T
- 190 -Gamepad ●Check the gamepads that have been tested for compatibility with this TV at the following website. (English only)http://panasonic.net/v
- 191 -SettingsSetting menuHow to useVarious menus allow you to make settings for the picture, sound, and other functions.1. Display the menu with ME
- 192 - ●To change menu pages= Note = ●A different menu will be displayed in the mode of Media Player or Network services. Media Player Using Media
- 193 -PictureViewing ModeSelects your favourite picture mode for each input.(Dynamic / Normal / Cinema / True Cinema / Custom / Professional1 / Profe
- 194 -Basic settingsBacklight, Contrast, Brightness, Colour, Tint, SharpnessAdjusts the levels of these options according to your personal preference
- 195 -Caption SmootherMakes caption contours smooth. Specially effective for low resolution contents.(Auto / Max / Mid / Min / Off) ●Not valid in 3D
- 196 -Option SettingsGame Mode(On / Off)Provides suitable images for fast response signals when playing games. ●Not valid on TV or multi window mode
- 197 -HDMI RGB Range(Auto / Full / Normal)Adjusts the black level of the image for each HDMI input. ●When the black level is not suitable, select Ful
- 198 -Screen Settings16:9 Overscan(On / Off)Selects the screen area displaying the image for 16:9 aspect.On:Enlarges the image to hide the edge of th
- 199 -3D Settings3D Detection(On (Advance) / On / Off)Selects whether to switch to the 3D mode automatically or not.On (Advance):Detects all the 3D f
- 2 -Watchingmy Home Screen•Information 11•How to use 12•Settings 13Basic•Satellite connection 15•Basic connection 17•Selecting channel 19•
- 20 - To select a channel using TV Guide1. Display TV Guide with GUIDE2. Select the current programme or channel with / / / and press OK t
- 200 -L/R Picture Swap(L/R (Normal) / R/L (Reversed))Swaps pictures for left eye and right eye (except in 2D3D mode).Select R/L (Reversed) if you fee
- 201 -SoundModeSelects your favourite sound mode for each input.(Standard / Music / Ambience / User)Standard:Provides the suitable sound quality for
- 202 -BalanceAdjusts volume level of right and left speakers.Surround(Stadium / Hall / Natural / Off)Selects surround sound settings.Stadium:Provides
- 203 -Volume settingsHeadphone VolumeAdjusts the volume of headphones.Auto Gain Control(On / Off)Automatically regulates large sound level difference
- 204 -Voice Guidance SettingsVoice Guidance(On / Off)Set to On to enable voice guidance of the basic features (menu item, on-screen messages, etc.) f
- 205 -Advanced settingsMPXSelects multiplex sound mode (if available).Stereo:Use this normally.Mono:When stereo signal cannot be receivedM1 / M2:Avai
- 206 -SPDIF Selection(Auto / PCM)Selects the initial setting for digital audio output signal from DIGITAL AUDIO and HDMI2 (ARC function) terminals. ●
- 207 -NetworkNetwork ConnectionSets the network setting to use this TV in your network environment. Internet service Network settings Home network
- 208 -TimerOff TimerSets the duration of time until the TV automatically goes into Standby mode.(90 / 75 / 60 / 45 / 30 / 15 / Off (minutes)) Watchin
- 209 -SetupEco NavigationAutomatically sets the TV to the most suitable energy-saving mode.The concerned items and their current settings are display
- 21 - Current time Features available / message meanings :Sound mute is onBad signal:Poor quality TV signalDolby D+, Dolby D, HE-AAC:Dolby Digital
- 210 -Tuning MenuFavourites EditCreates a list of favourite channels. Watching Tuning and editing channels Favourites Edit ●Not valid in Analogue
- 211 -Antenna System(One LNB / MiniDiSEqC / DiSEqC 1.0 / Single Cable)Sets the antenna system to use plural LNBs for receiving several satellites. Wa
- 212 -LanguageOSD LanguageChanges language for on-screen displays.Preferred Audio 1 / 2Selects the first and second preferred language for DVB multi
- 213 -Display SettingsPreferred Subtitle Type(Standard / Hard of Hearing)Selects the preferred subtitle type. ●Preferred Subtitles 1 / 2 in Language
- 214 -Input LabelsAccesses the input labels list to select the label of each input mode or set to skip unconnected one for easier identification and
- 215 -Common InterfaceSets to watch encrypted channels, etc. Functions Common InterfaceVIERA Link SettingsVIERA Link(On / Off)Sets to use VIERA Lin
- 216 -Professional Mode (isfccc)Enables the professional picture settings.Set to On to display the modes of Professional1 and Professional2 in Viewin
- 217 -System MenuKeyboard LayoutSelects the language that your USB or Bluetooth Keyboard supports. ●For information of using Keyboard Functions Key
- 218 -SupportFAQsPictureBefore requesting service or assistance, please follow these simple guides to solve the problem.If the problem still persists
- 219 -No image can be displayed ●Check all required cables and connections are firmly in place. ●Check the correct input mode is selected. ●Check the
- 22 - ●To hide the bannerEXIT ●Extra information (DVB)– Press again to hide the banner. ●To adjust banner timeout, set Banner Display Timeout. Setti
- 220 -Digital TVBefore requesting service or assistance, please follow these simple guides to solve the problem.If the problem still persists, please
- 221 -No programmes shown on TV Guide ●Check the digital transmitter. ●Adjust the direction of the aerial or dish to another transmitter installed ne
- 222 -SoundBefore requesting service or assistance, please follow these simple guides to solve the problem.If the problem still persists, please cont
- 223 -3DBefore requesting service or assistance, please follow these simple guides to solve the problem.If the problem still persists, please contact
- 224 -HDMIBefore requesting service or assistance, please follow these simple guides to solve the problem.If the problem still persists, please conta
- 225 -NetworkBefore requesting service or assistance, please follow these simple guides to solve the problem.If the problem still persists, please co
- 226 -Cannot operate internet content ●Check the connections and settings. Internet service Network connections Internet connection Internet serv
- 227 -Built-in Camera does not work ●Ensure the built-in Camera is held up. When the application for camera operation is activated, the built-in Came
- 228 -MaintenanceCare and CleaningFirst, remove the mains plug from the socket outlet. Display panel, Cabinet, PedestalRegular care:Gently wipe the
- 229 -InformationUsing Help menu1. Display the menu with MENU2. Select Help with / and press OK to access3. Select TV Self Test / System Informat
- 23 -Sub ChannelSelects the multifeed programme - sub channel (if available). ●For DVB modeSubtitle LanguageSelects the language for subtitles (if av
- 230 -Optional accessories3D Eyewear 3D Eyewear ●TY-EP3D20E(1 pack includes 2 eyewears)– If you need 3D Eyewear additionally, please purchase this
- 231 -LicenceLicenceEven if no special notation has been made of company or product trademarks, these trademarks have been fully respected.DVB and th
- 232 -Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,487,535 & other U.S. and worldwide patents issued & pending.
- 233 -At least three (3) years from delivery of this product, Panasonic will give to any third party who contacts us at the contact information provi
Ver.2.05
- 24 -SubtitleDisplay / hide subtitles (if available) with STTL. ●To select the preferred language for DVB subtitles (if available), set Preferred Sub
- 25 -External equipmentExternal connectionThese diagrams show our recommendations for connection of your TV to various pieces of equipment. For other
- 26 - AV devices AV2 (COMPONENT) terminals Component cables– AV2 (COMPONENT / VIDEO) adaptor (supplied) is necessary. DVD player AV2 (VIDEO) t
- 27 - USB devices USB port USB cable USB HDD= Note = ●It is recommended to connect the devices to the TV’s USB ports directly. ●You cannot use t
- 28 - Headphones Headphone jack M3 stereo mini plug Headphones ●To adjust volume, set Headphone Volume. Settings Sound Volume settingsWatchin
- 29 -= Note = ●If the external equipment has an aspect adjustment function, set it to 16:9. ●For details, read the manual of the equipment or ask you
- 3 -TV Guide•Using TV Guide 46•Timer Programming 48Teletext•Viewing Teletext 50•Teletext mode 523D•Note 53•3D Eyewear - Maintenance 53•Viewi
- 30 - How to change the codeEach Panasonic product has its own remote control code. Change the code according to the product for operation.1. Pres
- 31 -HDMI featuresHDMI (high-definition multimedia interface) is the world’s first complete digital consumer AV interface complying with a non-compre
- 32 - DVI connectionIf the external equipment has only a DVI output, connect to the HDMI terminal via a DVI to HDMI adaptor cable. When using the D
- 33 -Terminal information AV1 SCART terminal (RGB, VIDEO)1 : Audio out (R)2 : Audio in (R)3 : Audio out (L)4 : Audio earth5 : Blue earth6 : Audio i
- 34 - HDMI terminal1 : TMDS Data2+2 : TMDS Data2 Shield3 : TMDSData2−4 : TMDS Data1+5 : TMDS Data1 Shield6 : TMDSData1−7 : TMDS Data0+8 : TMDS Da
- 35 -For best pictureViewing Mode1. Display the menu with MENU2. Select Picture Viewing Mode with / and press OK to access3. Select the mode w
- 36 -In each Viewing Mode, Backlight, Contrast, Brightness, Colour, Tint, Sharpness, Colour Temperature, Vivid Colour, Adaptive Backlight Control, Am
- 37 -AspectChange the aspect ratio (image size) with ASPECT. To change the aspect ratio manually1. Display Aspect Selection list with ASPECT2. Sel
- 38 -= Note = ●Display the image (TV, external input, etc.) full-screen to use this function completely. ●Aspect mode can be memorised separately for
- 39 - ●AV1 (SCART) / AV2 (VIDEO) terminalsValid input signal format:PALSECAMPAL 525/60M.NTSCNTSC: Control signal through SCART (pin 8) / HDMI termina
- 4 -•Editing timer programming 79•Note 80Technical information•USB HDD 81Internet serviceInternet content•Information 82•Selecting internet co
- 40 -Advanced SettingsYou can adjust and set up the detailed picture settings for each input when Viewing Mode is set to True Cinema, Custom or Profe
- 41 - White BalanceR-Gain / G-Gain / B-GainAdjusts the white balance of bright red / green / blue areas.R-Cutoff / G-Cutoff / B-CutoffAdjusts the w
- 42 - Colour ManagementR-Hue / R-Saturation / R-LuminanceAdjusts the picture hue / saturation / luminance of red areas.G-Hue / G-Saturation / G-Lum
- 43 - GammaGamma(2.6 / 2.4 / 2.2 / 2.0 / 1.8)Switches the gamma curve. ●Please note the numerical values are reference for the adjustment.More Deta
- 44 -Lock SettingsLocks the settings of Professional1 / 2 mode for each input.1. Display the menu with MENU2. Select Picture Lock Settings with /
- 45 -For best audioSound mode1. Display the menu with MENU2. Select Sound Mode with / and press OK to access3. Select the mode with / and p
- 46 -TV GuideUsing TV GuideTV Guide - Electronic Programme Guide (EPG) provides an on-screen listing of the programmes currently broadcast and the fo
- 47 - ●To watch the programme1) Select the current programme with / / / and press OK to access2) Select View with / and press OK to access
- 48 - ●To view more details of the programme (DVB)1) Select the programme with / / / 2) Press to view– Press again to return to TV Guide. ●T
- 49 -= Note = ●Not valid in Analogue mode ●Timer Programming only works reliably if correct time information is received via the signal from the broa
- 5 -•Custom - Wired 106•Custom - Wireless Access Point 108•Network Status 109•TV Remote App Settings 109•Network Link Settings 110•Software Upd
- 50 -TeletextViewing Teletext1. Switch to teletext with TEXT ●Displays the index page (content varies depending on the broadcasters). ●Current / sub
- 51 - Watch TV and teletext in two windows at once1. Press MENU twice2. Set Picture and text to On / Off with / ●Operations can be made only in t
- 52 -Teletext modeTeletext services are the text information provided by the broadcasters. ●The features may vary depending on the broadcasters.1. D
- 53 -3DNote ●Display the image (TV, external input, etc.) full-screen for viewing 3D. ●Do not exert pressure on or scratch the lens of the 3D Eyewear
- 54 -Viewing 3DYou can enjoy viewing 3D images with contents or programmes corresponding to the 3D effect by wearing the 3D Eyewear. ●This TV support
- 55 -3D Mode SelectionYou can easily change the viewing mode between 2D and 3D with 3D.1. Display the 3D Mode Selection screen with 3D2. Select the
- 56 -3D Settings1. Display the menu with MENU2. Select Picture 3D Settings with / and press OK to access3. Select one of the following items w
- 57 -3D Adjustment(On / Off)Adjustment of the 3D effect (except in 2D3D mode).Set to On to enable Effect setting. ●When setting to On, a safety preca
- 58 -Source image formatIf the picture appears to be abnormal, refer to the table of images that can be seen for each 3D Mode Selection (Manual) and
- 59 -Tuning and editing channelsSetting menuYou can retune channels, create your favourite channel lists, skip unwanted channels, etc.1. Display the
- 6 -•Viewing photo 132•Sorting photos 132•Multi Shot 3D 133•Using slideshow 134Video mode•Selecting file 139•Watching video 140•Video Set
- 60 - ●To change the category (blue)3. Press OK to add it to Favourite List ●To add all channels to the list1) Press (yellow)2) Press (green) to ad
- 61 -Channel List Skip unwanted DVB / Analogue channelsYou can hide (skip) unwanted channels. The hidden channels cannot be displayed except in thi
- 62 - Edit DVB / Analogue Channels ●To swap / move the channel position (if available)1) Press (green) to edit2) Set the new position with / o
- 63 -Auto SetupAutomatically retunes the channels received in the area. ●This function is available if channel tuning is already performed. ●Only the
- 64 -4. Select LNB / Satellite with / and set with / ●Select IN 1 / IN 2 in Signal Input with / to set for each tuner.1) Set LNB first– I
- 65 - DVB-C, DVB-T, Analogue channels1. Select Auto Setup with / and press OK to access2. Set DVB-C Auto Setup Settings with / / / and p
- 66 -Manual Tuning ●Normally use Auto Setup or Update Channel List to retune DVB channels. ●If tuning has not been done completely or for adjusting t
- 67 - AnalogueSet Analogue channel manually after Auto Setup.1. Select the channel position with numeric buttons2. Select the channel with Channe
- 68 -Signal ConditionSelects a channel and checks the signal condition.A good Signal Strength is not an indication of suitable signal for DVB recepti
- 69 -Selectable satellites Selectable satellites and dish alignment to tune DVB-S channelsTo ensure your satellite dish is correctly installed, ple
- 7 -•Settings 159Multi Window•Information 160•How to use 161•Note 163VIERA Link “HDAVI Control™”•Summary of VIERA Link 164•Preparations 168•
- 70 -RecordingUSB HDD setupPreparationsYou can record the digital TV programmes to the connected USB HDD and enjoy playing back in various ways. ●Pre
- 71 - ●The data recorded on the USB HDD with this TV can only be played back on this TV. You cannot play back its contents with another TV (including
- 72 -Setting for USB HDDFormat and set up the USB HDD with this TV in order to use it for recording.All the USB devices recognised as a mass storage
- 73 - ●Mode of the USB HDD: The USB HDD is available for recording / playing back. Only one USB HDD on the list is available for recording.: The USB
- 74 -Recording current programmeOne Touch RecordingRecords the current programme to the USB HDD immediately. ●Confirm the remote control code is “73”
- 75 -REW LIVE TVRecords the current programme to the USB HDD constantly within the maximum recordable time. ●Confirm the remote control code is “73”.
- 76 - To stop REW LIVE TV1. Display the menu with MENU2. Select Setup Recording Setup REW LIVE TV with / and press OK to access3. Select Of
- 77 -Timer ProgrammingSetting timer programmingThe Timer Programming menu allows you to select programmes that you want to be reminded to watch or re
- 78 -3. Select the item (channel, date and starting / ending time) with / and set / / with / ● and can also be entered with numeric bu
- 79 -4. Store with OKEditing timer programming1. Display the menu with MENU2. Select Timer Timer Programming with / and press OK to access3.
- 8 -Setting characters•Using numeric buttons 183Built-in Camera•Using built-in Camera 184Voice Control•Preparations 185•How to use 186Bluetoot
- 80 -Note ●TV Guide may also be used to set timer programming event. Watching TV Guide Timer Programming ●Timer Programming can store up to 15 ev
- 81 -Technical informationUSB HDD USB HDD(for recording the digital TV programmes with this TV) ●The capacity of USB HDD that works with this TV is
- 82 -Internet serviceInternet contentInformationYou can access some specific websites supported by Panasonic, and enjoy internet contents such as vid
- 83 -Selecting internet content1. Display APPS List with APPS ●For details of APPS List Functions APPS List ●Depending on the usage conditions, it
- 84 -Note ●If you cannot access the internet contents, check the network connections and settings. Internet service Network connections Internet se
- 85 -Network connectionsInternet connectionTo use internet service, you need a broadband network environment. ●If you do not have any broadband netwo
- 86 -Note ●Ensure to use a LAN straight cable. ●Set up and connect equipment required for the network environment. You cannot make such settings on t
- 87 -Network settingsNetwork ConnectionEnsure the connections are completed before starting network setup. Internet service Network connections Q
- 88 -7. Select Exit with / and press OK to set ●To set manually Internet service Network settings Custom - Wireless Quick setup - Wired1.
- 89 - ●For Manual1) Press (yellow)2) You can set up SSID, security type, encryption type, and encryption key manually3) Follow the on-screen instr
- 9 -Sound•Mode 201•Basic settings 201•Volume settings 203•Voice Guidance Settings 204•Advanced settings 205•Reset to Defaults 206Network•Ne
- 90 -Proxy Settings ●It is not required for normal household use. ●Some internet services may not be available depending on the proxy settings.Proxy:
- 91 -Custom - WiredEnsure the connections are completed before starting network setup. Internet service Network connections1. Display the menu wit
- 92 -Proxy Settings ●It is not required for normal household use. ●Some internet services may not be available depending on the proxy settings.Proxy:
- 93 -Network StatusDisplays and checks the network status (MAC Address, current network settings, etc.).1. Display the menu with MENU2. Select Netwo
- 94 -Home networkDLNAInformationThis TV is a DLNA Certified™ product.DLNA® (Digital Living Network Alliance) is a standard that makes DLNA Certified
- 95 - ●To use a PC as a media serverPrepare the PC with Windows 7 / Windows 8 or ensure the server software is installed on the PC. “Windows 7 / Wind
- 96 - Playback of sharing contents on this TV with the DMC (Digital Media Controller) network equipmentYou can enjoy contents stored in the media s
- 97 - Sharing the TV programme or contents of this TV with another piece of network equipmentYou can enjoy the current digital TV programme or the
- 98 -Using DLNATo use DLNA® features, ensure the preparations of the media server, network connections and network settings are completed. Home netwo
- 99 -Network connectionsDLNA connectionTo use DLNA features, you need a home network environment and you can operate the features without a broadband
Comments to this Manuals