Panasonic TXP42GT30E Operations Instructions Page 114

  • Download
  • Add to my manuals
  • Print
  • Page
    / 120
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 113
Frequently Asked Questions
114
FA Q s
B efore requesting service or assistance, please follow these simple guides to resolve the problem.
If the problem still persists, please contact your local Panasonic dealer for assistance.
Block noise, frozen or disappearing image occurs in DVB mode / White spots or shadow image (ghosting) occurs in
Analogue mode/ Some channels cannot be tuned
C heck the position, direction and connection of the aerial or dish.
C heck [Signal Condition](p.52). If [Signal Quality] is displayed in red, the DVB signal is weak.
Weather conditions will affect signal reception (heavy rain, snow, etc.), in particular in poor reception areas. Even during
good weather, the high pressure can cause poor reception of some channels.
Due to the digital reception technologies involved, quality of the digital signals may be relatively low in some cases,
despite good reception of analogue channels.
Turn the TV off with the Mains power On / Off switch, and then on again.
If problem persists, consult your local dealer or service provider for the availability of services.
DVB-S Auto Setup cannot be done completely
C heck connections and dish alignment. (p.46)
If the problem persists, consult your local dealer.
No programmes shown on TV Guide
C heck the digital transmitter.
Adjust the direction of the aerial or dish to another transmitter installed nearby.
C heck the analogue broadcast. If the image quality is poor, check the aerial and consult your local dealer.
Neither image nor sound is produced
I s the TV in AV mode?
C heck the correct input mode is selected.
C heck the mains lead is plugged into the socket outlet and the TV is turned on.
C heck the Picture Menu (p.36 - 38) and volume.
C heck all required cables and connections are firmly in place.
Auto aspect
Auto aspect is designed to provide you with the best ratio to fill the screen. (p.107)
Press the ASPECT button if you would like to change the aspect ratio manually. (p.21)
Black and white picture
C heck that the output of the external equipment matches the input of the TV.
When connecting with SCART, ensure the output setting of the external equipment is not S-Video.
Input mode, i.e. EC/AV1 remains on the screen
Press the button to clear these.
Press again to redisplay.
Q-Link function does not work
C onfirm SCART cable and connection.
Also set [AV1 out] in the Setup Menu. (p.40)
[VIERA Link] function does not work and an error message appears
C onfirm the connection. (p.95,96)
Turn the connected equipment on and then switch the TV on. (p.98)
Recording does not start immediately
C heck the settings of the recorder. For details, read the manual of the recorder.
Contrast is reduced
C ontrast is lowered in the following conditions without any user operation for a few minutes :
no signal in DVB or AV mode
selected locked channel
selected invalid channel
selected radio channel
d isplayed menu
thumbnail or still picture in Media Player or DLNA operations
Page view 113

Comments to this Manuals

No comments