Panasonic PT-DW7000U User Manual download pdf (Page 72)

Automatic adjustment

(Only for RGB input)

Use this setting when adjusting a specific or oblong

(16:9, etc.) signal.

Press the MENU button.

The MAIN MENU screen will be displayed.

Select “OPTION” with the

buttons.

Press the ENTER button.

The OPTION screen will be displayed.

Using the buttons, select “AUTO

SETUP”.

Press the ENTER button.

The AUTO SETUP screen will be displayed.

Using the buttons, switch to the

desired mode.

“DEFAULT”: to receive signals of which image

aspect is 4:3 or 5:4

“WIDE”: to receive signals of which image

aspect is 16:9 (oblong)

“USER”: to receive signals of specific horizontal

resolution (number of horizontally

displayed dots)

If “USER” is selected, enter the

horizontal resolution of signal source

into “DISPLAY DOTS” using

buttons.

Press the ENTER button.

Execute automatic adjustment.

A message “PROGRESS...” appears during

automatic adjustment.

When the adjustment is complete, the system

returns to the input screen.

MODE

DEFAULT

WIDE

Applicable resolution

640 x 400, 640 x 480, 800 x 600, 832 x

624, 960 x 720, 1 024 x 768, 1 152 x 864,

1 152 x 870, 1 280 x 960, 1 280 x 1 024,

1 600 x 1 200, 1 400 x 1 050

720 x 400, 848 x 480, 1 280 x 720,

1 120 x 750, 1 376 x 768, 1 600 x 1 024

Video setting

This feature allows the user to select the signaling

system according to the connected device.

Select “VIDEO SETTING” from the

“OPTION” screen and press the ENTER

button.

The “VIDEO SETTING” screen will be displayed.

Use the buttons to select

"VIDEO" or "S-VIDEO".

Use the buttons to select “AUTO

1” or “AUTO 2”.

“AUTO1”: The system is automatically selected from

among NTSC, PAL, SECAM, NTSC4.43 and

PAL60.

“AUTO2”: The system is automatically selected from

among NTSC, PAL-M and PAL-N.

Option settings

DVI EDID

(Only when the ET-MD77DV input module is

installed)

Select the EDID mode setting that corresponds to

the device to be connected.

Select “DVI EDID” from the “OPTION”

screen and press the ENTER button.

Use the buttons to select

“EDID1” or “EDID2”.

MODE

EDID1

EDID2

Input signal formats supported

480p, 576p, 720/60p, 720/59.94p, 720/50p,

1 080/60i, 1 080/59.94i, 1 080/50i, 1 080/24sF,

1 080/23.98sF, 1 080/30p, 1 080/29.97p,

1 080/25p, 1 080/24p, 1080/23.98p

Displayable resolution:

VGA-UXGA (non-interlace)

Dot clock frequency:

25 MHz - 162 MHz

Note

• Interlace signals are not supported even

when the EDID2 mode is selected.

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 115 116

Comments to this Manuals

No comments

Panasonic PT-DW7000U User Manual Page 72

Comments to this Manuals

Related products and manuals for Projectors Panasonic PT-DW7000U