3. Remove dirt on the sensors with the included blower (
), then wipe the image sensor covers with the
roller cleaning paper (page 48).
How to clean the sensors and reflectors
Remove the brush from the blower (
), place it on the holes for the sensors and reflectors (
), as well
as the conveyor indentations (
), and blow off dirt, as shown in the illustration below.
Location of Sensors
Waiting sensor
Skew sensors
Double feed detectors
(For the KV-S4065CL /
KV-S4065CW, there is only 1 double
feed detector in the center.)
Starting sensor
Image sensor cover (B)
Double feed detectors
(For the KV-S4065CL /
KV-S4065CW, there is only 1 double
feed detector in the center.)
Paper sensor
Image sensor cover (F)
Operating Manual 55
Care and Maintenance
Comments to this Manuals