Panasonic Broadcast AK-HC1500G Menu Information
- 33 (E) -Setting of menu items MAINTENANCE menuDETAIL [OFF, ON]For turning all the detail functions ON or OFF.TOTAL DTL LEVEL [–31 to +31]For settin
- 34 (E) -ENGLISHSetting of menu itemsSLIM DETAIL [OFF, ON]For setting the detail more finely at ON.DETAIL(+) [–31 to +31]For adjusting the detail gai
- 35 (E) -Setting of menu items MAINTENANCE menuSKIN TONE DTL [OFF, ON]For turning the SKIN TONE DTL ON or OFF.SKIN GET [OFF, ON]When ON is selected,
- 36 (E) -ENGLISHSetting of menu items MAINTENANCE menu[8] GAIN, AUTO IRISLOW GAIN [–6 dB to 30 dB]MID GAIN [–6 dB to 30 dB]HIGH GAIN [–6 dB to 30 dB
- 37 (E) -Setting of menu items MAINTENANCE menuThese settings are performed when S.GAIN1, S.GAIN2 or S.GAIN3 has been selected by GAIN SELECT.MODE [
- 38 (E) -ENGLISHSetting of menu items MAINTENANCE menu[9] SUPER GAINLEVEL DEPENDENT [0 to 15]For removing the detail in the dark areas. The higher
- 39 (E) -Setting of menu items MAINTENANCE menuSCAN REVERSE [OFF, REVERSE1 to 3]For selecting the video output scanning method.OFF: Normal scanning
- 40 (E) -ENGLISHSetting of menu items MAINTENANCE menuMATRIX TABLE [A, B]For selecting the table in which the matrix data is to be stored.MATRIX R-G
- 41 (E) -Setting of menu items MAINTENANCE menuR SAT/PHASE [–63 to +63]Mg SAT/PHASE [–63 to +63]B SAT/PHASE [–63 to +63]Cy SAT/PHASE [–63 to +63
- 42 (E) -ENGLISHSetting of menu items SETTING menuD5600K [OFF, ON] : When the VIDEO MENU is selectedLIGHTING [TUNGSTEN, DAYLIGHT]: When the FILM MEN
- 25 (E) -Setting of menu itemsHow to display the menusTwo methods are used to display the menus. Using AK-HC1500 multi purpose camera to display t
- 43 (E) -Setting of menu itemsCAM ID POSI [0 to 3]For selecting where the camera ID is to be displayed.0: top left, 1: top right, 2: bottom left, 3:
- 44 (E) -ENGLISHSetting of menu itemsFORMAT[720/60p, 59.94p, 50p, 1080/60i, 59.94i, 50i, 1080/30p, 29.97p, 25p, 24p, 23.98p]For selecting the video o
- 45 (E) -ABB OK: When the automatic black balance has been adjusted satisfactorily.OUT RANGE RGB: When the automatic black balance has not been
- 46 (E) -ENGLISHSetting of menu items SETTING menuSHUTTER MODE [OFF, ON, SYNCHRO]For selecting the operation mode of the shutter.OFF: For turning t
- 47 (E) -Setting of menu items SETTING menuGEN-LOCK INPUT [BNC, DSUB]For selecting whether the sync signals are to be input from the BNC or D-SUB co
- 48 (E) -ENGLISHSetting of menu items SETTING menuPROTOCOL [1 to 4]For selecting the remote control communication system in accordance with the syst
- 49 (E) -Setting of menu items CAMERA ID menuAn ID of not more than 10 characters consisting of alphanumerics, symbols and spaces can be set for the
- 50 (E) -ENGLISHSetting of menu items FILE OPERATION menuMODE [LOAD/STORE]Select LOAD when settings are to be loaded from a file; select STORE when
- 51 (E) -Setting of menu items TIME CODE menuTIME CODE is displayed only when FILM MENU has been set and either the 720/60p or 720/59.94p format has
- 52 (E) -ENGLISHSetting of menu itemsMenu listScene file items indicated by “”MAINTENANCE 1.BLACK SHADING DETECTIONCORRECT(DIG)2.PEDESTAL, GAMMAM
- 26 (E) -ENGLISHSetting of menu itemsDETECTION [READY, ACTIVE]For automatically correcting the black shading. CORRECT(DIG) [OFF, ON]For ON/OFF contro
- 53 (E) -Setting of menu itemsScene file items indicated by “”MAINTENANCE 6.DETAIL SLIM DTLDETAIL(+)DETAIL(–)DETAIL CLIPDETAIL SOURCE7.SKIN TONE
- 54 (E) -ENGLISHSetting of menu itemsScene file items indicated by “”MAINTENANCE 12.COLOR CORRECTION R SAT/PHASEMg SAT/PHASEB SAT/PHASECy SA
- 27 (E) -Setting of menu items MAINTENANCE menuM PEDESTAL [–200 to +200]For adjusting the black level.R PEDESTAL [–100 to +100]For correcting the re
- 28 (E) -ENGLISHSetting of menu itemsB BLACK GAMMA [–15 to +15]For adjusting the gamma characteristics of the blue in the vicinity of the black in re
- 29 (E) -Setting of menu itemsR FLARE [000 to 100]G FLARE [000 to 100]B FLARE [000 to 100]For adjusting the flare correction.FLARE [OFF, ON]For turni
- 30 (E) -ENGLISHSetting of menu items MAINTENANCE menuM KNEE POINT[80.00% to 107.00% (VIDEO MENU)][30% to 90% (FILM MENU/VIDEO REC)]For adjusting th
- 31 (E) -Setting of menu itemsA. KNEE POINT [80.00% to 107.00%]For setting the auto knee break point position.This setting does not take effect when
- 32 (E) -ENGLISHSetting of menu items MAINTENANCE menu[4] KNEE, WHITE CLIPKNEE [OFF, MANUAL, AUTO]For selecting the knee operation mode.This setting
Comments to this Manuals