Panasonic WV-SC386 Installation Guide download pdf (Page 12)

Precautions for installation

This product is designed to be used as a pendant

mount camera.

When using after installing it tilted or on desktop, it may

not work correctly or its lifetime may be shorten.

Installing place

Contact your dealer for assistance if you are unsure of an

appropriate place in your particular environment.

 • Makesurethat the installationareaisstrongenough

to hold this product, such as a concrete ceiling.

 • Whentheinstallationareaisnotstrongenough,rein-

force and strengthen it or use an optional mount

bracket (WV-Q105 or WV-Q126).

 • Whentheproductisinstalledon a wall, use the wall

mount bracket (WV-Q118A).

Do not place this product in the following places:

 • Locations where it may get wet from rain or water

splash

 • Locationswhereachemicalagentisusedsuchasa

swimming pool

 • Locations subject to humidity, dust, steam and oil

smoke

 • Locationsinaspecificenvironmentwhereasolventor

a flammable atmosphere exists

 • Locationswherea radiation, an X-ray,astrongradio

wave or a strong magnetic field is generated

 • Locationswherecorrosivegasisproduced,locations

where it may be damaged by briny air such as sea-

shores

 • Locations where the temperature is not within the

specified range (☞ page 31)

 • Locations subject to vibrations (This product is not

designed for on-vehicle use.)

 • Locations subject to condensation as the result of

severe changes in temperature (In case of installing

the camera in such locations, the dome cover may

become foggy or condensation may be caused on

the cover.)

Mounting method for this product

Mount the product horizontally so that the dome section

faces downward.

Procure fixing screws separately.

The screws that secure this product are not supplied.

Prepare them according to the material and strength of

the area where the product is to be installed.

Screw tightening

 • The screws and bolts must be tightened with an

appropriate tightening torque according to the materi-

al and strength of the installation area.

 • Donotuseanimpactdriver.Useofanimpactdriver

may damage the screws or cause tightening exces-

sively.

 • Whenascrewistightened,makethescrewataright

angle to the surface. After tightening the screws or

bolts, perform visual check to ensure tightening is

enough and there is no backlash.

Be sure to remove this product if it is not in use.

Radio disturbance

When this product is used near TV/radio antenna, strong

electric field or magnetic field (near a motor, a transformer

or a power line), images may be distorted and noise

sound may be produced.

PoE (Power over Ethernet)

Use a PoE hub/device that is compliant with IEEE802.3af

standard.

Router

When connecting this product to the Internet, use a

broadband router with the port forwarding function (NAT,

IP masquerade).

Refer to the Operating Instructions (included in the

CD-ROM) for further information about the port forwarding

function.

Time & date setting

It is necessary to set the time & date before putting this

product into operation. Refer to the Operating Instructions

on the provided CD-ROM for descriptions of how to per-

form the settings.

Panasonic assumes no responsibility for injuries or property damage resulting from failures arising out of

improper installation or operation inconsistent with this documentation.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 35 36

Comments to this Manuals

No comments

Panasonic WV-SC386 Installation Guide Page 12

Comments to this Manuals

Related products and manuals for Security cameras Panasonic WV-SC386