Panasonic WV-SF332 Installation Guide download pdf (Page 14)

Precautions for Installation

Installation work shall be performed in accordance with the technology standard of the

electric installation.

This camera is designed to be used

indoors.

This product is not operable outdoors.

Do not expose this camera to direct sunlight for

hours and do not install the product near a

heater or an air conditioner. Otherwise, it may

cause deformation, discoloration and malfunc-

tion. Keep this camera away from water and

moisture.

Installing place

Do not place this product in the following plac-

es:

 • Locations where it may get wet from rain

or water splash

 • Locationswhereachemicalagentisused

such as a swimming pool

 • Locationssubjecttohumidity,dust,steam

and oil smoke

 • Locations in aspecific environmentwhere

a solvent or a flammable atmosphere

exists

 • Locations where a radiation, an X-ray, a

strong radio wave or a strong magnetic

field is generated

 • Locations where corrosive gas is pro-

duced, Locations where it may be dam-

aged by briny air such as seashores

 • Locations where the temperature is not

within –10 °C to +50 °C {14 °F to 122 °F}.

 • Locations subjecttovibrations (Thisprod-

uct is not designed for on-vehicle use.)

 • Locations subject to condensation as the

result of severe changes in temperature

(In case of installing the camera in such

locations, the dome cover may become

foggy or condensation may be caused on

the cover.)

Be sure to remove this product if it is not

in use.

Shielded (STP) LAN cables must be used

with this unit to ensure compliance with

EMC standards. *

* PAL models only

Before installation

 • The camera mount bracket described on

page 19 shall be used to mount the cam-

era.

 • When this camera and camera mount

bracket are mounted on a ceiling or a wall,

use the screws described on page 19. The

screws to be used are not provided.

Prepare the screws according to the mate-

rial, structure, strength and other factors of

the mounting area and the total weight of

objects to be mounted.

 • Ensure that the mounting surface, anchor

and screws are sufficiently strong.

 • Do not mount this product on a plaster

board or a wooden section because they

are too weak. If this product is unavoidably

mounted on such a section, the section

shall be sufficiently reinforced or use an

optional ceiling mount bracket (WV-Q105).

Screw tightening

 • The screws and bolts must be tightened

with an appropriate tightening torque

according to the material and strength of

the installation area.

 • Do not use an impact driver. Use of an

impact driver may damage the screws or

cause tightening excessively.

 • When a screw is tightened, make the

screw at a right angle to the surface. After

tightening the screws or bolts, perform

visual check to ensure tightening is enough

and there is no backlash.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 43 44

Comments to this Manuals

No comments

Panasonic WV-SF332 Installation Guide Page 14

Comments to this Manuals

Related products and manuals for Security cameras Panasonic WV-SF332