Panasonic WV-TW310 Installation Guide download pdf (Page 6)

Main functions

H.264 Recording

Images are encoded to H.264 and saved on the SDHC memory card.

Wide angle

The wide angle lens enables wide areas to be recorded.

Pre recording

Depending on the settings, pre recording of up to 30 seconds is possible.

Color mode / black & white mode switching available

Images will be displayed clearly even at night since the camera will be automatically switched from

the color mode to the black and white mode under low illumination condition.

Power over Ethernet function

When connecting with a PoE (Power over Ethernet) device, power will be supplied by simply con-

necting a LAN cable. (IEEE802.3af compliant)

•

Network Camera View 4S

• Wearable Camera Agent Software

• Wearable Camera Viewer Software

PC installed with software

Wearable Camera

Network (LAN)

Wearable Camera

IMPORTANT:

• Wearable Camera Agent Software uses directed broadcasts to search for the camera. The

router that you use must be configured to allow directed broadcast packets. If directed broad-

cast packets cannot be configured to be allowed, structure your system so that camera and

the PC installed with software are on the same network segment.

•

Use UDP port 10668 and 10669 for transmissions between the Wearable Camera Agent Software

and the camera. The router that you use must be configured to allow UDP port 10668 and 10669.

Note:

•

It is necessary to configure the network settings of the PC and its network environment to moni-

tor images from the camera on the PC. It is also necessary to install a web browser on the PC

1 2 3 4 5 6 7 8 9 10 11 ... 31 32

No comments

Panasonic WV-TW310 Installation Guide Page 6