Panasonic BB-HNP17CE Datasheet download pdf (Page 2)

BB-HNP17

(Server)

Router

Network camera

Web browser

(Client)

Internet

This system is designed to

enlarge the image

(stationary image) at the

time of the sensor

detection by popping it out

on the screen for notifying

purpose.

Routine-run

Even if a user of this system uses his/her PC at any place distant from a site to be

recorded, this system enables the user to record and replay, on his/her PC, any

image with sound which can be taken through its network camera connected with

LAN or the Internet.

Under this system, the user can record any image as well as sound with it, and so

the user can feel as if he/she was on the spot, even though he/she is actually away

from the site. Also, this system enables the user to record several pieces of images

through its network cameras at the same time.

Corresponding to the existing convenient functions of MPEG-4 and Motion JPEG,

this system has also newly corresponded to the H.264 function which is responsible

for high-compression and smooth moving image. So, users of this system can

select a proper recording mode among multiple choices according to recording

uses and environments.

Internet

H.264

MPEG-4

JPEG

H.264

MPEG-4

JPEG

This system enables a user to record and monitor, innovatively clearly in such high

resolution as 1280 x 960 pixels, any image taken through its camera.

If you need to take a clear and detailed image for your convenient use by this

system, you can save in your PC your recorded data as high image quality as it is

for your convenience.

H.264, MPEG-4 and Motion JPEG Recording & Monitoring

Supports Resolution of 1280 x 960

This function shows different multi-monitoring images at certain intervals and can

switch into different pages of those images.

Auto Scan Display under Multi-Monitoring

Remote Access Function

If a user gets [BB-HNP17] installed on his / her PC, the user can access and / or

check any image taken by the network camera on the web browser of his / her PC

through the Network. In this use, [BB-HNP17] doesn't need to be installed on the

PC on the client's side. Users making access to the image can establish three

stages of access rights. The administrator has the right to create new use

environmental settings by, for example, adding new recording conditions, etc.

Flexible Layout

Full Screen Display

Single Monitoring Screen Display

Flexibility of Layout Setup

Pop-up Display with Sensor Detection

Motion Detection Recording

Recording starts when any

movement in the image of the

entrance or other place is

sensed.

Network Camera Recorder

with Viewer Software

Internet

Sound Detection Recording

Recording starts the moment a

big sound happens in the place;

the sound of collapse of things

in a warehouse, etc.

Network Camera Recorder

with Viewer Software

Internet

Shock Detection Recording

Recording starts the moment the

system detects any shocks on the

camera; someone is trying to

damage the camera or something

hits the camera, etc.

Network Camera Recorder

with Viewer Software

Internet

Timer Recording

Recording the inside of your

shop or other places at

intervals

Network Camera Recorder

with Viewer Software

Internet

*Only Alarm 1 is available in case

of BB-HCM705/HCM701

Alarm Recording

Recording starts when any

movement of the door or

other items is sensed.

Network Camera Recorder

with Viewer Software

Internet

Door sensor

( Alarm 1 )

Door sensor

( Alarm 1 )

Under this function, different types of sensors (Movement Detector, Shock

Detector, Sound Detector, External Sensor Detection) are designed to start

recording. Also this system has its timer recording function which starts and

ends the recording at user's specified time. Besides, in case of Timer

Recording, the direction of the monitoring lens is designed to set at the

specified target when the recording starts. Any combination of recording

functions is available. For example, Sensor Detection Function combined with

Timer Recording Function is possible. Recording to be started by Movement

Detector within the specified time frame and Alarm Recording are also possible.

Also, Recording Time before and after the sensor detection can be specified for

setting. Timer Recording Function is designed to set 10 times of recording per

camera. This enables a user to change recording-start /-end times between

weekdays and weekend for his/her convenience.

Multi-Sensor-Activated Recording/

Timer Recording with Preset Position

Original file format: Images and voices are recorded continuously in a

moving image file.

Recording file format

Hard disk, network drive*

Recording media

H.264 : 1280 x 960 / 640 x 480 / 320 x 240

MPEG-4 : 1280 x 960 / 640 x 480 / 320 x 240 / 192 x 144

MotionJPEG : 1280 x 1024 / 1280 x 960 / 640 x 480 / 320 x 240 /

192 x 144 / 160 x 120

Recording resolution*

Favor clarity , Standard , Favor motionsImage quality (JPEG only)

Not specified (based on camera's image update interval),

specified: 5 images/second to 1 image/hour Recording interval designation

and sound recording can be done simultaneously.

Recording interval

Dependent on camera type and performance of PC.

See the hardware specifications "System Requirements for your PC".

No. of camera units for

simultaneous recording

Maximum recording capacity value can be set for individual camera units

(Whether to save new data by overwriting or to stop recording when

the set capacity is reached can be selected). In addition to a capacity limit

for each camera, there is also a capacity limit for the entire storage media.

Recording capacity

limit function

The unit can be set to activate recording when motion is detected (sensitivity

and threshold value can be adjusted) or to record for a certain time length

before and after motion detection.*

Motion detection can be disabled in

specified areas. Motion detection can be confirmed on-screen.

Motion detection recording

(JPEG only)

Starts recording with shock detection recording when the camera detects a shock.

The recording time for shock detection recording (and so on) is set using this software.

Shock detection recording

(JPEG only)

The unit can be set to activate recording when sound is detected

(Loudness and threshold value can be adjusted) or to record for a certain

time length before and after motion detection.

Sound detection can be confirmed on-screen.

Sound detection recording

(JPEG only)

Scheduled start and stop timer based on day of week and time.

Key word can also be set for recording.

(10 schedules can be registered per camera).

Timer recording

Specifying the display location of timer start/stop times

Timer recording with

preset position

Recording is triggered by the reaction of a sensor mounted to the camera.

A certain time length before and after the sensor

reaction can also be recorded.

Alarm recording (JPEG only)

Monitors the free space on the specified recording disk,

and stops recording when the free space becomes smaller

than the set value.

Disk capacity limit function

Camera registration monitoring

Specifications

Recording

Image operation

Image search

Color night view activation/deactivation can be

registered in a schedule

Time specified color night view*

Periodically scans and displays the locations registered

in the camera presets.

(Only for cameras with preset sequence feature)

Preset Sequence*

Preset functions set in cameras can be usedPreset

Control of basic camera functions (pan/tilt/zoom,

brightness, resolution, image quality, sound level)

Camera control*

3 types of zoom functions: the camera zoom functions

(Ex zoom and digital zoom), as well as

the ActiveX control of the computer.

Image zoom in/out*

Automatically adjusted to match the camera layout.

Selected camera image display

Each camera can be set up individually

(camera name, resolution, image quality setting,

recording format, timer setting, etc.)

Camera setup*

Automatically adjusted to match the camera layout.Image display size

Sequential display, Up to 16 multi-camera display,

full screen display, layout change

Camera image view

Up to 64 camera units.

Note that the actual number of registerable camera units

varies depending on the performance of the PC used.

No. of registerable

camera units

Playback of images with voices, playback of image files. Playback speed

can be varied. Playback in reverse is possible. Simultaneous playback of

images from multiple cameras is also possible.

Continuous play back

Language

BB-HNP17A (For USA): English / Japanese

BB-HNP17CE (For Other Regions): English / Germany / Spanish / Italian

A list of recorded image files, or a graphical list can also be displayed.Recorded image view

Recorded images can be copied or deleted.

Operation of

recorded images

All or part of the recorded images can be converted to MPEG-1, MPEG-4,

or JPEG format files, or only the audio portion can be converted to WAV files.

Format conversion

Search recorded images in 1-day units using the recording time, or

using a key word set before recording.

Searching can also be done for particular, desired folders.

Recorded image

search function

*1 Depends on Camera's Spec.

*2-1 Folders on the network allotted to the drive can be specified for saving data.

*2-2 When a network drive is specified as a folder for saving data, the amount of data flowing

over the network increases.     

This may remarkably degrade the operating performance for watching or recording camera

images, watching previously recorded images, etc., and may also result in errors. It is

recommended that a folder on a local disk be specified for saving data.

*3 The detection level varies depending on the camera resolution, image quality setting, subject

conditions, network conditions, etc.

Cautions: Before you install the remote

client of [BB-HNP17], please be sure to

buy the following license fro use.

For USA: BB-HCA5A and BB-HCA8A

For Other Regions: BB-HCA5CE and BB-HCA8CE

* Corresponding Model Types

Network Cameras

[H.264]

BB-HCM735 /HCM715 /HCM705 /HCM701

BL-C230 /C210

[MPEG-4]

BB-HCM735 /HCM715 /HCM705 /HCM701 /HCM581

/HCM580 /HCM547 /HCM531 /HCM527 /HCM515 /HCM511

BL-C230 /C210 /C160 /C140 /C131 /C111 /C121/C101

[Motion JPEG]

BB-HCM735 /HCM715 /HCM705 /HCM701 /HCM581 /HCM580

/HCM547 /HCM531 /HCM527 /HCM515 /HCM511/

BB-HCM403 /HCM371A /KX-HCM110A

BL-C230 /C210 /C160 /C140 /C131 /C111 /C121 /C101 /C1

This system enables a user to display images from up to 16 network cameras on

one screen for simultaneous monitoring (Multi-Monitoring). In case that the

number of network cameras registered in [BB-HNP17] exceeds 16 units, this

system can show images from up to 64 network cameras on 128 pages of

screens and switch these screens flexibly according to the user's need. Under

this system, for example, a user can switch images from its cameras into a Full

Screen Display or switch into a single screen display (Single Monitoring Screen

Display) by double-clicking a image the user want to check closely, etc.

If you double-click an image from the network camera, the screen display on your

PC is switched into Single Monitoring / Multi-Monitoring screen for the user’s

convenience.

Under this function, you can set up the layout of multi image screen display. For

example, you can enlarge an image you want to check closely, you can change the

number of images vertically and horizontally for your convenience, etc

A camera image is displayed on the full screen of your PC.

1 / 3 Pages of images

through 4 different

cameras are displayed for 5 sec.

2 / 3 Pages of images

through 4 different

cameras are displayed for 5 sec.

3 / 3 Pages of images

through 4 different

cameras are displayed for 5 sec.

Camera1 Camera2

Camera3 Camera4

Camera5 Camera6

Camera7 Camera8

Camera9 Camera10

Camera11 Camera12

Routine-run Routine-run

Feel Safer with Panasonic

Clear image and innovative sound recording functions

provide excellent monitoring for your business

Color Night View Mode OFF

In case of Normal Mode

in the night

Color Night View Mode ON

Timer Setting

automatically

switches image

modes.

Time Specified Color Night View

This function is for setting the timer to turn ON/OFF the Color Night View Mode. 

This function automatically turns on Normal Mode in daytime and turns on Color Night

View Mode in the night or a dark situation, and so this function enables recording /

monitoring images taken by the Network camera(s) in a proper mode according the

recording situation. This function also memorizes the shutter speed of the normal

mode and so recovers the shutter speed of Color Night View Mode into the one of

Normal Mode when

switching from

Color Night View

Mode into Normal

Mode.

1 2

Comments to this Manuals

No comments

Panasonic BB-HNP17CE Datasheet Page 2

Comments to this Manuals