Panasonic KXTG454SK Operations Instructions download pdf (Page 18)

Link to cell feature

Y

ou can connect your base unit and cellular

phone using Bluetooth wireless technology, so

that you can make or answer cellular calls

using your phone system. This allows you to:

– use the unit to talk on cellular calls even if

some areas of your home have poor

cellular reception, simply by placing your

cellular phone in an area with good

reception.

– talk on cellular calls even if your cellular

phone is in your pocket or bag.

– enjoy cordless cellular calls even if your

cellular phone plugged in and charging.

Important:

R Your cellular phone must support the

Hands Free Profile (HFP) specification.

R You may pair 2 cellular phones and 1

headset.

R The unit can be used to talk on 2 lines at

the same time (for example, 2 cellular lines,

or the landline and 1 cellular line).

R Only 2 Bluetooth devices can be used with

the unit at the same time (for example, 2

cellular lines, or the headset and 1 cellular

line).

R Locate your cellular phone near the base

unit. If the cellular phone is too close to the

base unit during a cellular call, you may

hear noise. For best performance, we

recommend placing the cellular phone

between 0.6 m to 3 m (2 feet to 10 feet)

away from the base unit.

Pairing a cellular phone

I

mportant:

R For more details and the list of compatible

cellular phones, please visit our Web site:

http://www.panasonic.com/link2cell

R Before pairing a Bluetooth enabled cellular

phone to the base unit, make sure that no

other Bluetooth device such as a Bluetooth

headset is connected to your cellular phone.

1 Handset:

For CELL 1: MMENUN#6241

For CELL 2: MMENUN#6242

R A

fter the corresponding CELL indicator

on the base unit starts flashing, the

rest of the procedure must be

completed within 5 minutes.

2 Your cellular phone:

While the corresponding CELL indicator

is flashing, follow the instructions of your

cellular phone to enter the pairing mode.

R Depending on your cellular phone, it

may ask you to enter the Bluetooth

PIN (default: “0000”). If your cellular

phone shows PassKey confirmation on

its display, follow the directions to

proceed.

3 Handset:

Wait until a long beep sounds.

R It may take more than 10 seconds to

complete pairing.

R When the corresponding CELL

indicator lights up, the cellular phone is

connected to the base unit. You are

ready to make cellular calls.

4 MOFFN

Note:

R Make sure that your cellular phone is set to

connect to this product automatically. Refer

to your cellular phone’s operating

instructions.

R Make sure you cancel your cellular phone’s

current pairing if you want to pair it to the

other line (page 18).

R The default setting for the text message

alert feature is “On(no announce)”, so

when you pair your cellular phone to the

base unit, this feature may be activated

(page 53). (This depends on the version

and type of cellular phone you are using.)

Unpairing a cellular phone

You can cancel the pairing of a cellular phone

that is stored in the base unit.

1 For CELL 1: MMENUN#6111

For CELL 2: MMENUN#6112

2 MbN: “Yes” a MSELECTN

R When the cellular phone is unpaired,

the CELL indicator is turned off.

3 MOFFN

18

For assistance, please visit http://www.panasonic.com/help

Link to Cell

TGE26x_27x(en)_0123_ver110.pdf 18 2015/01/23 9:57:41

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 95 96

Comments to this Manuals

No comments