Panasonic KXMB271 User Manual download pdf (Page 11)

1. Introduction and Preparation

Detailed operating instructions are on the CD-ROM, or can be viewed at www.panasonic.com/help

Initial Program ming

1.9 Date and time (KX-MB781

only)

1 {MENU} i {#}{1}{0}{1} i {SET}

M:|01/D:01/Y:07

TIME: 12:00AM

2 Enter the current month/date/year/hour/minute by

selecting 2 digits for each.

Example: August 10, 2007 10:15 PM (12 hour

clock format)

1. Press {0}{8} {1}{0} {0}{7} {1}{0} {1}{5}.

M:|08/D:10/Y:07

TIME: 10:15AM

2. Press {*} repeatedly to select “PM”.

3 {SET}

4 Press {MENU} to exit.

1.10 Your logo (KX-MB781 only)

You can program your logo (name, company name, etc.)

so that it appears on the top of each page sent.

1 {MENU} i {#}{1}{0}{2} i {SET}

LOGO=|

2 Enter your logo, up to 30 characters using the dial

keypad. i {SET}

3 Press {MENU} to exit.

1.11 Your fax number (KX-MB781

only)

You can program your fax number so that it appears on

the top of each page sent.

1 {MENU} i {#}{1}{0}{3} i {SET}

NO.=|

2 Enter your fax number, up to 20 digits.

L To enter a “+”, press {*}.

L To enter a space, press {#}.

L To enter a hyphen, press {FLASH}.

L To erase a number, press {STOP}.

3 {SET}

4 Press {MENU} to exit.

1.12 Configuring the unit to

access the LAN (KX-MB781 only)

You can print documents, scan documents, receive

faxes or send faxes using a computer on the LAN. To

enable these features, you need to set the IP address,

subnet mask, and default gateway for the unit.

Important:

L Consult your network administrator when setting

the IP address, subnet mask, and default

gateway.

1.12.1 Setting up automatically with a

DHCP server

Your situation:

– When only one unit is connected to the LAN.

If your network administrator manages the network with

a DHCP (Dynamic Host Configuration Protocol) server, it

will automatically assign an IP (Internet Protocol)

address, subnet mask, and default gateway to the unit.

1 After connecting the LAN cable to the unit and the

computer, connect the power cord.

L The IP address, subnet mask, and default

gateway will be set automatically.

2 Install Multi-Function Station on the computer that

you want to use it with.

1.13 Installing Multi-Function

Station

L Install Multi-Function Station (CD-ROM) before

connecting the unit to a computer with USB

cable. If the unit is connected to a computer with

USB cable before installing Multi-Function

Station, the [Found New Hardware Wizard]

dialog box will appear. Click [Cancel] to close it.

L Software features and appearance are subject to

change without notice.

Warning:

L To assure continued emission limit compliance;

– use only shielded USB cable.

– use only shielded LAN cable (category 5 straight

cable) (KX-MB781 only).

1 Start Windows

and exit all other applications.

L For Windows 2000, Windows XP and Windows

Vista™ operating system users, you must be

logged in as an administrator in order to install

Multi-Function Station.

2 Insert the included CD-ROM into your CD-ROM

drive.

3 [Easy installation]

L The installation will start.

4 When the setup program starts, follow the on-screen

instructions.

5 The [Connect Type] dialog box appears.

For USB connection:

1. [Connect directly with a USB cable.] i [Next]

L The [Connect Device] dialog box will appear.

MB271-781-PFQW2640ZB-QRG-en.book Page 11 Thursday, August 2, 2007 11:31 AM

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 19 20

Comments to this Manuals

No comments

Panasonic KXMB271 User Manual Page 11

Comments to this Manuals

Related products and manuals for Unknown Panasonic KXMB271