Multi Format Digital HDVideo Cassette RecorderOperating Instructions (Software)PEAJ-Model No.VQT0F76Before operating this product, please read the ins
– 10 –HOME menu displays∑ Setting mode display areaThe displays appearing in this area indicate the modes whichhave been set.CUT: Appears when the aud
– 100 –INSERT/ASSEMBLE MANUAL EDIT SET UP menuPress the (or )> keys to change to the MANUAL EDIT menu, then press the keyto display this menu.OR
– 101 –INSERT/ASSEMBLE MANUAL EDIT SET UP menuKeyF1F2–F7F8F9F10Key designationTIMING°For setting the edit timing.——EXITERR.STPError stop.TRACKINGFor a
– 102 –INSERT/ASSEMBLE MANUAL EDIT SET UP menuKeyF11F12F13Key designationCAP LOCKFor setting the capstanservo lock.FD TIME°For setting the audio fadet
– 103 –INSERT/ASSEMBLE MANUAL EDIT SET UP menu∑ EDIT REC INHIBIT mode displayThis display shows the statuses of the editing inhibit modes.≥SOFTWARE≥Th
– 104 –INSERT/ASSEMBLE MANUAL EDIT SET UP menu∑ Selecting the SOFTWARE inhibit channels(1) Press the center cursor key. The cursor now appears.(2) Pre
– 105 –INSERT/ASSEMBLE MANUAL EDIT SET UP menu∑ Tracking≥Automatically adjusting the tracking (optimizing)To optimize the tracking automatically, pres
– 106 –INSERT/ASSEMBLE MANUAL EDIT SET UP menu(3) The following message appears and optimizing is suspended in the following cases:≥When the VTR is se
– 107 –INSERT/ASSEMBLE MANUAL EDIT SET UP menu∑ Selecting the audio fade time(1) Press the F13 (MODE) key to set it to X FADE or V FADE.(2) Press the
– 108 –INSERT/ASSEMBLE AUTO EDIT menuThe AUTO EDIT menu is displayed by pressing the following keys: or #F12INSERTASSEMF13F12F11F10F9F8F7F6F5F4F3F2F1
– 109 –INSERT/ASSEMBLE AUTO EDIT menuKeyF1F2F3F4F5F6F7F8F9F10F11F12F13Key designationLAST XFor calling the edit data tobe input.LAST EDFor calling all
– 11 –HOME menu displays∑ Setting the initial value for the time code (1) Press the center cursor key.The display now appears in reverse video.(2) Pre
– 110 –INSERT/ASSEMBLE AUTO EDIT menu∑ Tape position indicatorThis indicates the edit points (IN and OUT) and tape positions of the recorder and playe
– 111 –INSERT/ASSEMBLE AUTO EDIT menu(2) Search the edit point using the search dial.1) Search the edit point using the search dial.2) Press the ENTRY
– 112 –INSERT/ASSEMBLE AUTO EDIT menuInput the data using the scratchpad.1) Press the center cursor key.The cursor now appears.2) Press the cursor key
– 113 –INSERT/ASSEMBLE AUTO EDIT menu∑ Variable memory function1. Set the F3 (W/PLYR) key to OFF.W/PLYR2. Set the F4 (VAR MEMO) key to ON.VAR MEMO≥If
– 114 –INSERT/ASSEMBLE AUTO EDIT menu∑ Variable memory editingBy operating the search dial on a VTR connected to the unit’s RS-422A REMOTE OUT connect
– 115 –INSERT AUTO EDIT CH SELECT menuThis menu is displayed by pressing the following keys: ##F13F12INSERTF13F12F11F10F9F8F7F6F5F4F3F2F1
– 116 –INSERT AUTO EDIT CH SELECT menuKeyF1F2F3F4F5F6F7F8F9F10F11F12F13Key designationVIDEO For selecting the videochannel ON/OFF.CH-1 For selecting t
– 117 –INSERT/ASSEMBLE AUTO EDIT SET UP menuThis menu is displayed by pressing the following keys: (or ) to change to the AUTO EDIT menu, then press
– 118 –INSERT/ASSEMBLE AUTO EDIT SET UP menuKeyF1F2F3F4F5F6F7Key designationTIMING°1For setting the edit timing.V PREVVideo preview.A PREVAudio previe
– 119 –INSERT/ASSEMBLE AUTO EDIT SET UP menuKeyF8F9F10F11F12F13Key designationEXIT DLY STRTDelay start.TRACKING For adjusting the tracking.CAP LOCK
– 12 –HOME menu displays∑ Setting and checking the cue time(1) Press the center cursor key.The time code display now appears in reverse video.(2) Pres
– 120 –INSERT/ASSEMBLE AUTO EDIT SET UP menu∑ Selecting the preroll time(1) Press the F5 (PREROLL) key.(2) Set the preroll time using the ADJUST contr
– 121 –SET UP menuThis menu is displayed by pressing the following key:SET UPF13F12F11F10F9F8F7F6F5F4F3F2F1KeyF1F2F3F4F5F6F7F8–F9F10F11F12F13Key desig
– 122 –INTERFACE SET UP menuThis menu is displayed by pressing the following keys: )F10SET UPF13F12F11F10F9F8F7F6F5F4F3F2F1
– 123 –INTERFACE SET UP menuKeyF1F2F3F4F5F6Key designationP-2RS-422A Control modesetting.RS-232CPARA50P parallel remoteON/OFF.AV CONT.V/A control.FF/R
– 124 –INTERFACE SET UP menuKeyF7F8F9F10F11F12–F13Key designationPREREAD°1For setting pre-read fromthe remote commands.EXITUB PRESETFor setting the UB
– 125 –INTERFACE SET UP menu∑ Table of correlations between modes and connectorsMODE-1 connection diagramMODE-2 connection diagramMODEMODE-1MODE-1MODE
– 126 –INTERFACE SET UP menu∑ Setting the RS-232C parameters(1) Press the F2 (RS-232C) key to set it ON.The parameter display now appears.BAUD RATE: 3
– 127 –INTERFACE SET UP menu∑ Setting the CH ASSIGN audio channelThe commands from a controller which has only analog audio CH1 and CH2 preset command
– 128 –PANEL SET UP menuThis menu is displayed by pressing the following keys: #F11SET UPF13F12F11F10F9F8F7F6F5F4F3F2F1
– 129 –KeyF1F2F3F4F5F6F7F8F9F10F11F12F13Key designationSOUND KEYSelection of click sound forfunction keys and IN/OUTkeys.SOUND ALARMSelection of warni
– 13 –HOME menuThis menu is displayed by pressing the following key:HOME[4]: Cassette tape in the 4-channel audio format.[8]: Cassette tape in the 8-c
– 130 –PANEL SET UP (OP MAP REMOTE) menuPress the ##keys to display the OP MAP REMOTE menu.This menu is used to set and display the buttons, keys, co
– 131 –PANEL SET UP (OP MAP REMOTE) menuKeyF1F2F3F4F5F6F7F8F9–F12F13Key designationVIDEOFor adjusting the videolevel.AUDIOFor adjusting the audiolevel
– 132 –PANEL SET UP (OP MAP REMOTE) menu∑ Correlation between F5 (MAP MODE) and F6 (FUNCTION) keysONotesN≥Even when the F6 key has been set to ENABLE
– 133 –PANEL SET UP (OP MAP LOCAL) menuPress the ###keys to display the OP MAP LOCAL menu.This menu is used to set and display the buttons, keys, con
– 134 –∑ OP MAP setting method≥Those buttons and keys which are marked on the graphics of the control panel shown on thedisplay correspond to the butt
– 135 –°The items set using F1 to F7 on the SYSTEM SET UP menu (on pages141 and 143) are not rewritten even if the factory files are loaded.USER SET U
– 136 –USER SET UP menu∑ Saving user filesTwelve files are provided in this unit.Two of these files are reserved: the LAST file containing the statuse
– 137 –USER SET UP menu∑ Locking user filesWhen locked, the files are protected from subsequent attempts to delete or update their data.(1) Press the
– 138 –USER SET UP menu∑ Deleting user filesUnnecessary files can be deleted.(1) Press the cursor keys to select the file to be deleted.5. EDITOR 2 (F
– 139 –USER SET UP menu∑ Copying user filenamesWhen a file is to be given the same name, the filename is copied.(1) Press the cursor keys to select th
– 14 –HOME menuKeyF1F2F3F4F5F6F7Key designationOUTPUTFor selecting theaudio/video output signals.FREEZEFor outputtting the flashfreeze frame.EJT CTLFo
– 140 –SYSTEM SET UP menuThis menu is displayed by pressing the following keys: )The system format and video output format currently set in the menu a
– 141 –SYSTEM SET UP menu Refer to the setting flowchart and output status tables on pages 144 and 145.)As indicated in the procedures below, select t
– 142 –KeyF4F5F6Key designationAUDIOFor selecting the audiorecording format.HD SDIHD MONIDescriptionFor selecting the audio recording format.When the
– 143 –KeyF7F8F9F10F11F12–F13Key designationSD SDIEXITA.REC.GRD——PB AUTO——DescriptionFor selecting the format in which the signals are to be output to
– 144 –F1: SYSTEM frequency setting≥F1 backlighting comes on.≥Displays go off inside VTR STATUS windows.≥SYSTEM frequency window opens.Use > cursor
– 145 –SYSTEM SET UP menuSystem format and video output status tableFREQ59.9423.98245025OptionalboardAJ-UDC3700AGYESVIDEO1080i720p525i1080psf1080p1080
– 146 –ENGINEER SET UP menuThis menu is displayed when the > and keys are pressed together, and then press the key again.FF13SET UPF13F12F11F10F9
– 147 –RF ENGINEER SET UP menuThis menu is displayed when the > and keys are pressed together and then the keyfollowed by the key are pressed.F
– 148 –KeyF1F2F3F4F5F6–F7F8F9–F13Key designationRED LAMP——REMOTESUPERERR LOG——EXIT——DescriptionFor selecting the lighting specifications for the red l
– 149 –OPERATION ENGINEER SET UP menuThis menu is displayed when the > and keys are pressed together and then the key ispressed.F9FF13SET UPF13F
– 15 –HOME menuKeyF8F9–F10F11F12F13Key designationSET UP——PREAD A°For setting audio pre-readto ON or OFF (SD mode only)PREAD V°For setting video pre-r
– 150 –OPERATION ENGINEER SET UP menuKeyF1F2F3–F7F8F9–F11F12F13Key designationEJECT LEDSTILL STEP——EXIT——ACCELKNEEDescriptionEnables the lighting cond
– 151 –TEST menuThis menu is displayed when the key is pressed.TESTF13F12F11F10F9F8F7F6F5F4F3F2F1UDC BOARD INSTALLEDKeyF1F2F3F4F5F6F7F8–F12F13Key d
– 152 –TEST menu∑ OPERATION TIME displayHow long the VTR has been used for appears on this display.OPERATION: Total power-on timeHEAD ROTATION: Cumula
– 153 –RF TEST menuThis menu is displayed by pressing the following keys: >F2TESTF13F12F11F10F9F8F7F6F5F4F3F2F1
– 154 –RF TEST menuKeyF1F2F3F4F5F6F7F8F9–F10F11F12F13Key designationEECC SMPLChange of error ratemeasurement time.METERSwitch of meter display.——LOADL
– 155 –RF TEST menu∑ Error rate displayThe error rates (error occurrence rates) are indicated on the 1) TOTAL ERROR and 2) INNER ERROR displays.1) TOT
– 156 –RF adjustment value display menuF13F12F11F10F9F8F7F6F5F4F3F2F1KeyF1–F5F6F7F8–F10F11F12Key designation——ADJ MODEAdjust mode.ADJ CH——ADJ RFRF adj
– 157 –AUDIO TEST menuThis menu is displayed by pressing the following keys: >F3TESTF13F12F11F10F9F8F7F6F5F4F3F2F1KeyF1F2F3F4F5F6F7F8F9F10F11F12F13
– 158 –MECHA TEST menuThis menu is displayed by pressing the following keys: >F4TESTF13F12F11F10F9F8F7F6F5F4F3F2F1F13F12F11F10F9F8F7F6F5F4F3F2F1The
– 159 –KeyF1F2F3F4F5F6–F7F8F9–F13Key designationMODELoading without tape.——C.SIZECassette size selection.——SENSORSensor operation check.——EXIT——Descri
– 16 –HOME menu∑ Pre-read editing [Performed in the SD mode (480/59i or 576/50i) only.](1) Set the pre-read function to ON by pressing the F key and F
– 160 –SYSTEM TEST menuThis menu is displayed by pressing the following keys: # .This menu contains keys for adjustments by service personnel. General
– 161 –SERVO TEST menuThis menu is displayed by pressing the following keys: # .F7TESTF13F12F11F10F9F8F7F6F5F4F3F2F1
– 162 –SERVO TEST menuKeyF1F2F3F4F5F6F7F8F9F10F11F12F13Key designationTORQUEReel torque adjustment.DATA SENDTorque data forwarding.MEASURE(Measure)ATA
– 163 –SERVO TEST menu∑ Error rate displayThe error rates are displayed in terms of the 1) TOTAL ERRORand 2) INNER ERROR.For details, refer to the des
– 164 –TEST FRONT menuThis menu is displayed by pressing the following keys: #F6TESTKeyF1F2F3–F7F8F9–F13Key designationPANELDisplay check.KEYCHECKFron
– 165 –KeyF1F2–F7F8F9–F13Key designationMODEDisplay dot check.——EXIT——DescriptionThe entire display panel is lighted up in a fixed pattern anddisplay
– 166 –TEST FRONT KEY CHECK IN menuThis menu is displayed by pressing the following keys: ##.F2F6TESTF13F12F11F10F9F8F7F6F5F4F3F2F1KeyF1–F7F8F9–F13Key
– 167 –TEST FRONT KEY CHECK IN menu∑ Dial and controlsWhen the ADJUST control, headphones control or search dial isturned, the number of pulses counte
– 168 –Inserting the IC cardThe insertion slot for the IC card is located on the back left of the front panel.Insert the IC card before using the TEST
– 169 –TEST IC CARD menuPreparationsWhen an error to be logged has occurred, this unit enables information on the date and time of the occurrenceof th
– 17 –HOME SET UP menuThis menu is displayed by pressing the following keys: )OR )F1SET UPF8HOMEF13F12F11F10F9F8F7F6F5F4F3F2F1
– 170 –TEST IC CARD menuDescriptionUser file management takes place using IC card.When the F key is pressed, transfer is made to TEST IC CARDUSER FILE
– 171 –≥User Files (TEST menu)OTEST IC CARD: USER menu function settingsNKeyF1F2F3F4F5F6F7F8F9F10F11F12F13KeydesignationLOADSAVEDELETE——TO VTRUP_LDTO
TEST IC CARD MULTI CUE menuThis menu is displayed by pressing the following keys: >>F2F13TESTDescriptionPress together with F key.This uploads s
– 173 –DescriptionPress together with F key.This uploads the selected files from theIC card to the VTR.This selects the page to betransferred.This ret
– 174 –TEST IC CARD MULTI CUE MONITOR menuThis menu is displayed by pressing the following keys: >>>.F3F2F13TESTDescriptionReturns the VTR to
– 175 –DescriptionPress together with F key.This uploads saved files from the VTRto the IC card.“TO FRONT” is displayed whenMACHINE CURRENT DATA has b
TEST IC CARD ERROR LOG MONITOR menuThis menu is displayed by pressing the following keys: >>>keys are pressed.To check the current log data o
– 177 –Error messagesFour kinds of error messages are displayed by this VTR.(1) DIAG menuA warning mark (W) blinks at the top left of the menu screen
DIAG menu error messagesA warning mark (W) blinks at the top left of the screen when an er-roneous setting, failure to verify a condition, warning or
– 179 –DIAG ACTIVE menuWhen the DIAG key is pressed while the warning mark is displayed, the DIAG ACTIVE menu below appears.DescriptionTransfers the V
– 18 –HOME SET UP menuKeyF1F2F3F4F5F6F7F8 Key designationSYNC PLYSync play.AT PLYFor switching the playbackpicture in JOG/VAR.PRG PLAYProgram play.PRG
– 180 –∑ When there are 2 or more canceled (masked) warnings≥Error messages are displayed from item of highest priority.≥All the messages can be viewe
– 181 –∑ When 2 or more warnings have occurred≥Error messages are displayed from item of highest priority. ≥All the messages can be viewed sequentiall
– 182 –DIAG error messagesMessageFAN STOP1FAN STOP2NO CUE ERASE CURRENTNO TC ERASE CURRENTNO FULL ERASE CURRENTNO CTL ERASE CURRENTVIDEO CONCEAL SW OF
– 183 –DIAG error messagesMessageWRONG OPTIMIZEDTRACKING VALUESERVO UNLOCKEDBEFORE IN POINTNO EXTERNAL HD REFNO EXTERNAL SD REFNO COLOR BURST IN SDREF
DIAG error messagesMessageINPUT DIGITAL AUDIO CH1/2SYNC ERROR CONFIRMINPUT DIGITAL AUDIOINPUT DIGITAL AUDIO CH3/4SYNC ERROR CONFIRMINPUT DIGITAL AUDIO
– 185 –DIAG error messagesMessageOVER-RUN ERROR INRECEIVED COMMANDFROM RS-422 PORTRS-422 COMMUNICATIONSTOP BY TIME OUTRECEIVED INVALIDCOMMAND FROM RS-
AUTO OFF error messagesIf a problem has occurred and the VTR cannot continue operating or the mechanism or tape may be damagedby continued operation,
– 187 –AUTO OFF error messagesMessageCPU TAPE HANDLETROUBLECPU (SERVO SYS) COMM.TROUBLECASSETTE PHOTOSENSOR TROUBLEDETECTION SWITCH FAIL(A)DETECTION S
SYSTEM error messagesWhen a problem has occurred in the VTR and its operation can no longer be guaranteed, the system errorlamp comes on, the buzzer s
– 189 –SYSTEM error messagesMessageAV NOT RESPONDINGSYSCON NOTRESPONDINGS2 BOARD NOTRESPONDINGS3 BOARD NOTRESPONDINGS4 BOARD NOTRESPONDINGS5 BOARD NOT
– 19 –HOME SET UP menuKeyF9–F10F11F12F13Key designation——PREROLLFor selecting the prerolltime.STILLFor setting theSTOP/STILL (static frame)mode holdin
– 190 –Operation messagesIn the majority of cases, when a mistake has been made in operating a button or key during automatic editing,a message appear
– 191 –Operation messages (in AUTO EDIT mode)No.350351352353354355356357359360361362363MessageNO CASSETTENO PRESETNO IN POINTNO PLY’ R MODENOT REC’ R
– 192 –Screen saver functionThis function is designed to prolong the service life of the VTR’s large display screen.The screen’s life may be shortened
– 193 –
PANASONIC BROADCAST & TELEVISION SYSTEMS COMPANYUNIT COMPANY OF MATSUSHITA ELECTRIC CORPORATION OF AMERICAExecutive Office:One Panasonic Way 4E-7,
– 2 –ContentsMenu screen transitions. . . . . . . . . . . . . . 4Turning on the power. . . . . . . . . . . . . . . . 7HOME menu displays . . . . . . .
– 20 –HOME SET UP menu∑ ReferenceOUT REF: This sets the video output signal reference.AUTO: When the REF VIDEO connector input sig-nal is available, t
– 21 –HOME SET UP menu∑ Programmed play function(1) Press the F4 (PRG PLY) key.(2) Set the step to FINE or COARSE using the F3 (PRG PLY) key.(3) Set t
– 22 –VIDEO IN menuThis menu is displayed by pressing the following key:VIDEO INF13F12F11F10F9F8F7F6F5F4F3F2F1
– 23 –VIDEO IN menuKeyF1F2F3–F6F7F8–F11F12F13Key designationINPUTFor selecting the HD videoinput signals.INT SGFor selecting the type ofHD internal si
– 24 –VIDEO OUT HD menuThis menu is displayed by pressing the following key:VIDEO OUTF13F12F11F10F9F8F7F6F5F4F3F2F1
– 25 –VIDEO OUT HD menuKeyF1F2F3F4F5–F7F8F9F10F11–F13Key designationFor adjusting the Y level.PBFor adjusting the PB level.PRFor adjusting the PRlevel
– 26 –VIDEO OUT HD SET UP menuThis menu is displayed by pressing the following keys: >F8VIDEO OUTF13F12F11F10F9F8F7F6F5F4F3F2F1
– 27 –VIDEO OUT HD SET UP menuKeyF1F2–5F6F7F8F9–F11F12F13Key designationLINE CONV°——SERIAL SYS PHASEINTERP.InterpolationEXIT——STATE——Description Line
– 28 –VIDEO OUT HD SET UP STATE menuThis menu is displayed by pressing the following keys: (or )>>OR>> (or )>F12F12F11F9VIDEO OUTF12F8
– 29 –VIDEO OUT HD SET UP STATE menu∑ Selecting the TAPE/EE output signalsThe video, audio and cue signals which are output during the VTR’s operation
– 3 –ContentsSET UP menu . . . . . . . . . . . . . . . . . . . 121INTERFACE SET UP menu . . . . . . . . 122PANEL SET UP menu . . . . . . . . . . . . .
– 30 –VIDEO OUT SD menuThis menu is displayed by pressing the following keys: >F9VIDEO OUTF13F12F11F10F9F8F7F6F5F4F3F2F1
– 31 –VIDEO OUT SD menuKeyF1F2F3F4F5–F6F7F8–F9F10F11F12F13Key designationYFor adjusting the Y level.PBFor adjusting the PB level.PRFor adjusting the P
– 32 –VIDEO OUT SD SET UP COMPOSITE menuThis menu is displayed by pressing the following keys: >>F11F9VIDEO OUTF13F12F11F10F9F8F7F6F5F4F3F2F1B.C
– 33 –VIDEO OUT SD SET UP COMPOSITE menuKeyF1F2F3–F4F5F6F7F8F9F10F11F12F13Key designationCOMB FIL°For controlling the combfilter.B. CLIP——SYS SCFor ad
– 34 –VIDEO OUT SD SET UP CMPST STATE menuThis menu is displayed by pressing the following keys: (or [AUDIO OUT])>>OR>> (or )>F12F12F11
– 35 –VIDEO OUT SD SET UP CMPST STATE menu∑ Selecting the TAPE/EE output signalsThe video, audio and cue signals which are output during the VTR’s ope
– 36 –VIDEO OUT SD SET UP SDI menuThis menu is displayed by pressing the following keys: ))F12F9VIDEO OUTF13F12F11F10F9F8F7F6F5F4F3F2F1B.CLIPOFF
– 37 –VIDEO OUT SD SET UP SDI menu° This item does not appear when 525p (480/59p) is set for the SD SDI output. Similarly, it does not appear when108
– 38 –VIDEO OUT SET UP LINE BLK (video output line blanking) menuThis menu is displayed by pressing the following keys: )) (or ) ) .F11F12F11F9VIDEO O
– 39 –VIDEO OUT SET UP LINE BLK (video output line blanking) menu∑ Setting the line blankingThe blanking lines in the vertical blanking period can be
– 4 –Menu screen transitionsHOME F8 HOME SET UPAUDIO IN F6AUDIO IN PCM INPUTSELECTAUDIO IN CUE INPUTSELECTF7F8 AUDIO IN SET UPAUDIO OUT F7AUDIO OUT MO
– 40 –VIDEO OUT SD SET UP SDI STATE menuThis menu is displayed by pressing the following keys: (or ) ))OR)) (or ) ) .F12F12F11F9VIDEO OUTF12F8AUDIO O
– 41 –VIDEO OUT SET UP STATE menu∑ Selecting the TAPE/EE output signalsThe video, audio and cue signals which are output during the VTR’s operation ar
– 42 –VIDEO OUT CONVERT menuThis menu is displayed by pressing the following keys: )F10VIDEO OUTF13F12F11F10F9F8F7F6F5F4F3F2F1KeyF1F2F3F4–F6F7F8F9F10
– 43 –VIDEO OUT CONVERT HD_TO_SD menuThis menu is displayed by pressing the following keys: ))F1F10VIDEO OUTF13F12F11F10F9F8F7F6F5F4F3F2F1FLDFIT_HKey
– 44 –VIDEO OUT CONVERT HD_TO_SD menuThe following menu is displayed when FMR2 has been selected with the F5 (V_FILTER) key in the system for-mat 1080
– 45 –KeyF10F11F12F13Key designationH_FILTER ENHANCEH_FILTER RESPONSEV_FILTER ENHANCEV_FILTER RESPONSEDescriptionSets the picture quality (horizontal
– 46 –– 46 –VIDEO OUT CONVERT SD_TO_HD menuThis menu is displayed by pressing the following keys: ))F2F10VIDEO OUTF13F12F11F10F9F8F7F6F5F4F3F2F1KeyF1
– 47 –– 47 –VIDEO OUT CONVERT HD_TO_HD menuThis menu is displayed by pressing the following keys: ))°This menu is operational when 1080/23.98p, 1080
– 48 –AUDIO IN menuThis menu is displayed by pressing the following key:AUDIO INF13F12F11F10F9F8F7F6F5F4F3F2F1The digital audio input statuses are dis
– 49 –AUDIO IN menuKeyF1F2F3F4F5F6F7F8F9F10F11F12F13Key designationCH-1For adjusting the audioCH1 input level.CH-2For adjusting the audioCH2 input lev
– 5 –Menu screen transitionsMULTI CUEF8MULTI CUE SET UPASSEMBLEASSEMBLE MANUALEDITF8ASSEMBLE MANUALEDIT SET UPF12F12F1F2F3F4F5F6F7F10F11F11F13F12HOME
– 50 –AUDIO IN PCM INPUT SELECT menuThis menu is displayed by pressing the following keys: >F6AUDIO INF13F12F11F10F9F8F7F6F5F4F3F2F1
– 51 –AUDIO IN PCM INPUT SELECT menuKeyF1F2F3F4F5F6F7F8F9Key designationCH-1For selecting the recordingsignals of digital audioCH1.CH-2For selecting t
– 52 –AUDIO IN PCM INPUT SELECT menuKeyF10F11F12F13Key designationCH-6For selecting the recordingsignals of digital audioCH6.DIGITALFor selecting the
– 53 –AUDIO IN CUE INPUT SELECT menuThis menu is displayed by pressing the following keys: >The below screen will be appeared when the menu is in t
– 54 –AUDIO IN CUE INPUT SELECT menuKeyF1F2F3F4F5–F7F8F9F10F11F12F13Key designationCH-1For setting cue mixing forCH1.CH-2For setting cue mixing forCH2
– 55 –AUDIO IN SET UP menuThis menu is displayed by pressing the following keys: >OR>F6SET UPF8AUDIO INF13F12F11F10F9F8F7F6F5F4F3F2F1
– 56 –AUDIO IN SET UP menuKeyF1F2–F5F6F7F8F9F10F11F12–F13Key designationINT SG MD——PEAK HOLDFor setting the peak hold.SCALEFor switching the levelmete
– 57 –AUDIO IN SET UP menuF11 (RATE CON) key∑ Operation≥The menu item is set to ON or OFF for both the recording and playback systems simultane-ously:
– 58 –AUDIO IN CH-MIX SELECT menuThis menu is displayed by pressing the following keys: >F9AUDIO INF13F12F11F10F9F8F7F6F5F4F3F2F1KeyF1F2–F5F6F7F8F9
– 59 –AUDIO IN CH-MIX SELECT menu∑ Mix-and-record(1) Press the F6 (CH-MIX) key to set it ON.The mixing graph display now appears.(2) Press the center
– 6 –Menu screen transitionsTESTF2RFDIAGF2DIAG MASKEDF3DIAG LASTF3AUDIOF4 MECHAF5 SYSTEMF6 FRONTF7F1F1SERVOF13 IC CARDF1 USERMULTI CUEERROR LOGF2F1TES
– 60 –AUDIO IN CH-MIX SELECT menu∑ Mix-and-record (continued)(5) Move the cursor to the mixing ratio display area, and turn the ADJUST control to set
– 61 –AUDIO OUT menuThis menu is displayed by pressing the following key:AUDIO OUTF13F12F11F10F9F8F7F6F5F4F3F2F1The digital audio input statuses are d
– 62 –AUDIO OUT menuKeyF1F2F3F4F5F6F7F8F9F10F11F12F13Key designationCH-1For adjusting the audioCH1 playback level. CH-2For adjusting the audioCH2 play
– 63 –AUDIO OUT MONITOR menuThis menu is displayed by pressing the following keys: >F7AUDIO OUTF13F12F11F10F9F8F7F6F5F4F3F2F1
– 64 –AUDIO OUT MONITOR menuKeyF1F2F3F4–F6F7F8F9–F10F11F12F13Key designationMODEFor selecting the mode.L CHR CH——A.MONIFor selecting the audiomonitor
– 65 –AUDIO OUT SET UP menuThis menu is displayed by pressing the following keys: >OR>F7SET UPF8AUDIO OUTF13F12F11F10F9F8F7F6F5F4F3F2F1
– 66 –AUDIO OUT SET UP menuKeyF1F2F3F4F5F6F7F8F9Key designationA/V PHASE°For adjusting the audiooutput phase in relation tothe video phase.JOG PROCFor
– 67 –AUDIO OUT SET UP menuKeyF10F11F12F13Key designationSTYLE°1RATE CON°2STATEAUTO CPY°3DescriptionThis menu item can be set by pressing the F10 key
– 68 –AUDIO OUT SET UP menuF11 (RATE CON) key∑ Operation≥The menu item is set to ON or OFF for both the recording and playback systems simultane-ously
– 69 –AUDIO OUT SET UP menu∑ Adjusting the audio output signals in relation to the video signals(1) Press the F1 (A/V PHASE) key to put the display in
– 7 –Turning on the powerTurn on the power.«The HOME menu is displayed.This VTR comes already programmed with menus that correspond to specific operat
– 70 –AUDIO OUT SET UP STATE menuThis menu is displayed by pressing the following keys: >>F12F8AUDIO OUTDescriptionNORMAL: The standard mode is
– 71 –– 71 –VIDEO OUT SET UP STATE menu∑ Selecting the TAPE/EE output signalsThe video, audio and cue signals which are output during the VTR’s operat
– 72 –AUDIO OUT SDI ASIGN menuThis menu is displayed by pressing the following keys: >F9AUDIO OUTF13F12F11F10F9F8F7F6F5F4F3F2F1SD_AUD24bit
– 73 –DescriptionSelects the channels whose signals are to be output to HD SDIembedded audio channels 1 through 4.CH1–4: The signals of CH1 through CH
– 74 –TC/CHR menuThis menu is displayed by pressing the following key:TC/CHRF13F12F11F10F9F8F7F6F5F4F3F2F1
– 75 –TC/CHR menuDescriptionINT: Built-in time code generator.EXT LTC: LTC time code from TIME CODE input connector.S LTC: LTC time code added to seri
– 76 –TC/CHR menuDescriptionON: CF BIT is recoorded.OFF: CF BIT is not recorded.≥When [EXT LTC], [S VITC] or [S LTC] is selected in the F1 key,the VTR
– 77 –TC/CHR menu∑ Changing the superimposing position(1) Move the position using the cursor keys.≥When a cursor key is held down, the cursor will mov
– 78 –TC/CHR menu∑ Time code displays and VTR’s operating modes (continued)VTR’s operating modesSTOP F.FWDPREVIEW REWREVIEW EDIT PLAY (edit playback)P
– 79 –TC/CHR menu∑ Superimposed displaysWhen TC.TC is selected as the SUPER setting, the time code appears as a 2-level display. (The HDSUPER and SD S
– 8 –How to display the ≥AUDIO IN menu: ≥AUDIO IN PCM INPUT SELECT menu:menus:# ≥AUDIO OUT menu: ≥AUDIO IN CUE INPUT SELECT menu:# F7AUDIO OUTAUDIO OU
– 80 –TC/CHR menuTable of user bit settingsF1 (SOURCE)INT (internal) TCS LTCS VITCEXT LTCEXT LTCF2 (TC SLAVE)————SLAVEDIRECTF3 (UB SLAVE)ONOFFONOFFONO
– 81 –TC/CHR SET UP menuThis menu is displayed by pressing the following keys: )OR )F5SET UPF8TC/CHRF13F12F11F10F9F8F7F6F5F4F3F2F1
– 82 –TC/CHR SET UP menuKeyF1–F6F7F8F9F10F11F12F13Key designationTCG OUTEXITVITC.LVITCFor superimposing VITConto the SD output.——VITCFor selecting the
– 83 –TC/CHR SET UP VITC.L menuThis menu is displayed by pressing the following keys: ))OR)).F9F5SET UPF9F8TC/CHRF13F12F11F10F9F8F7F6F5F4F3F2F1KeyF1–F
– 84 –TC/CHR SET UP VITC.L menu∑ Selecting the line where VITC is to be inserted1. Use the cursor keys (2, 1) to select the lines where VITC is to be
– 85 –TC/CHR CONVERT menuThis menu is displayed by pressing the following keys: )∑ 2-level and 3-level time code displays≥Front panel≥When the 24➝30 m
– 86 –TC/CHR CONVERT menuKeyF3F4F5F6F7F8F9F10F11Key designationSYNC PHASE°——DF MDRC_30SYS24 TAPE LTC_OUTEXITSUPR_FRQRC_TC°SD SUPERDescriptionFor setti
– 87 –TC/CHR CONVERT menuKeyF12F13Key designationHD SUPERLTC OUT°DescriptionFor selecting the time code which is to be output to the HDmonitor connect
– 88 –Audio insert editing function with 23.98 Hz VTR system and 30 Hzexternal operating environmentsAs shown in the above diagram of the system conne
– 89 –Audio insert editing function with 23.98 Hz VTR system and 30 Hzexternal operating environmentsOPoints to noteNThe function will not work unless
– 9 –HOME menu displaysREF: This indicates the status of the output reference signalwhich has been selected by the VTR.HD REF59: HD REF with a field f
– 90 –LTC output selection when playing back a 25P (23.98P/24P) tapewith a 23.98/24 (25) Hz VTR system addedSince, as shown in the figure above, the v
– 91 –MULTI CUE menuThis menu is displayed by pressing the following key:MULTI CUEF13F12F11F10F9F8F7F6F5F4F3F2F1
MULTI CUE menuKeyF1F2F3F4F5F6F7F8F9F10F11F12F13Key designation1For designating the cuenumber 1 and page.2For designating the cuenumber 2 and page.3For
– 93 –MULTI CUE menu∑ Switching the pages≥A particular page can be selected by pressing one of the F1 (1) through F5 (5) or F9 (6) throughF13 (10) key
MULTI CUE menu4. Move the cursor to the section where the captured time code is to be displayed.5. Press the COPY key to call the captured time code.5
– 95 –MULTI CUE SET UP menuThis menu is displayed by pressing the following keys: )F8MULTI CUEF13F12F11F10F9F8F7F6F5F4F3F2F1
– 96 –MULTI CUE SET UP menuKeyF1F2F3F4F5F6–F7F8F9F10F11F12F13Key designationAUTO STEPFor setting the auto stepmode.PAG MODEFor setting the cursormovem
– 97 –INSERT/ASSEMBLE MANUAL EDIT menuPress the (or )> keys to display the MANUAL EDIT menu.F12INSERTASSEMF13F12F11F10F9F8F7F6F5F4F3F2F1KeyF1–F7F
– 98 –INSERT MANUAL EDIT CH SELECT menuThis menu is displayed by pressing the following keys: >>F13F12INSERTF13F12F11F10F9F8F7F6F5F4F3F2F1°CH-5
– 99 –INSERT MANUAL EDIT CH SELECT menuKeyF1F2F3F4F5F6F7F8F9F10F11F12F13 Key designationVIDEOFor selecting the videochannel ON/OFF.CH-1For selecting t
Comments to this Manuals