Panasonic VHS Hi-Fi Duplicator AG-6841Hp User Manual download pdf

lo^FoDuplicator

AG-ШИ'^ 7Р/AG-ÜÜli

Instruction Guide

Panasonic мк

Professional/lndustrial video LJLH-E=i

Thank you for purchasing the VHS Hi-Fi Duplicator AG-6841 H/AG-6851H. The

AG-6841 H is a dubbing VTR only for use in recording and AG-6851 H is for recording

and playback. They have been designed so that when combined with Cassette Auto

Changer AG-CL78/AG-CL68 (option), automatic loading of up to two cassette tapes can

be performed.

Controls and Their Functions

When set to the ON position, the Eject/Auto OFF Lamp 0 lights if no

cassette is inserted.

0 Peak Meter (Option)

These meters indicate the peak audio input level.

Use the level controls to adjust the input signal as follows:

• Supply a standard signal to the Audio Input Jack. Adjust the level so

that the needle of the level meter indicates as below.

Normal Audio: Hi-Fi Position

Hi-Fi Audio; Hi-Fi Position

• Supply normal sound and check that the needle of the level meter does

not exceed the “0" position.

• Dolby NR* Level: The Dolby NR level is located at the “-6" position.

0 Audio Input Level Control (CH1/CH2)

These controls are used to adjust the audio input level while monitoring

the Audio Meter AG-AM10 (option) or Audio Meter Unit AG-AM20

(option).

O Tape Run Lamp

Lights: During FF or REW mode.

Flashes: During cassette tape with CTL signal is running.

0 Record Lamp

Lights: Recording mode

Flashes: No signal is input in the recording mode, or when the "Rec

Auto Off” (internal switch) is turned ON.

0 Eject/Auto OFF Lamp

Lights: No cassette is inserted

Flashes: Malfunction has occured to the tape transport system. The

unit will not operate.

0 Mode Indicator Lamps

VIDEO AGC: Lights when the “Video AGO (Automatic Gain Control)” is

turned ON.

Hi-Fi: Lights when the “Hi-Fi Audio Recording" is turned ON.

LIMITER: Lights when the “Audio Limited’ is turned ON.

DOLBY NR; Lights when the “Dolby NR” is turned ON.

0 Eject Button

0 Test Terminals

An oscilloscope can be connected to these terminals for confirmation of

Video and Hi-Fi Audio RF output during playback, as well as Phase

Generator and Drop Out Compensation.

"RESET Button

This button is located inside the front panel. Press this button to reset the

hour meter to “0".

* Dolby noise reduction manufactured under license from Dobly Laboratories Licensing Corporation.

* “DOLBY" and the double-D symbol □□ are trademarks of Dolby Laboratories Licensing Corporation.

To confirm the audio recording meter level, connect the Audio Meter Unit

AG-AM20 (option).

Remote Control Connector

Exclusively for the Remote Controller AG-A11 (option).

To Changer Connector

Connect the VTR Connector of the Cassette Auto Changer AG-CL78 or

AG-CL68 (option).

Pin No. Signal Pin No. Signal

+20 V Output

AUT OFF Output

2 +5 V Output

GND

7 EJECT SWiD

CAS IN Output 8 EJECT SW (2)

CAS OUT Output

9 START Output

Hour Meter

Indicates the head rotation time by each 10-hour unit. (It can be

displayed up to 30,000 hours.)

AC Power Cord

3-prong grounded type. Do not defeat its purpose.

Video Input Connector (BNC type)

Video Input Connector (Loop through type)

This connector can bridge the Video Input Connector ©.

Remote Control Connector (34P)

Connect to the Remote Controller AG-A600 (option).

Pin No.

10-11

13-17

Signal

REC SWITCH

PLAY SWITCH

FF SWITCH

REW SWITCH

STOP SWITCH

PAUSE SWITCH

CASSETTE IN

GND

REEL PULSE

Pin No.

19-20

30-33

Signal

EJECT SWITCH

REC HOLD

PLAY HOLD

FF HOLD

REW HOLD

STOP HOLD

PAUSE HOLD

+12 V (max. 100 mA|

’ HOLD signals are output by open collector circuits. Therefore, user's

remote controller for these pins should be designed as open collector

output circuits or Transistor Transistor Logic (TTL) level.

’ Number 34 pin (+12 V) should be used only for our remote controller

AG-A600.

Printed in Japan

VQT7949

S109eH100

1 2 3 4 5 6 7 8

Summary of Contents

Page 1 - 7Р/AG-ÜÜli

lo^FoDuplicator AG-ШИ'^ 7Р/AG-ÜÜliInstruction GuidePanasonic мкProfessional/lndustrial video LJLH-E=iThank you for purchasing the VHS Hi-Fi

Page 2 - MENT TO RAIN OR MOISTURE

® Terminate ON/OFF SwitchSet this switch to OFF when performing series connection of video input signal. Normally piace to the ON position.® Hi-Fi Aud

Page 3 - AG-AM10/AG-AM20 (Opiton)

AG-AM10/AG-AM20 (Opiton)Audio Meter AG-AM10When this Audio Meter is installed onto the peak meter section, it is used to set and confirm the

Page 4 - Panasonic

SpecificationsPower Source:Power Consumption:120 VAC, 50-60 Hz 31W max. (25W in REC mode)Television System:Video Recording System:EfA Standard (525 li

Page 5 - Panasonic Щк

Duplicateur ItÎId“(FdAG-WliP / AG-liJliGuide d’utilisationPanasonic ЩкVidéo industnelle/protosslonnelle Nous VOUS remercions pour cet achat du Du

Page 6 - MISE EN GARDE:

Connecteur de télécommande (34 contacts)Le raccorder à la télécommande AG-A600 (vendue séparément).No. de contactSignalNo. de contactSignal1 Commutate

Page 7 - O Indicateur de niveau audio

AG-AM10/AG-AM20 (vendus séparément)Indicateur audio AG-AM10Lorsque cet indicateur audio est installé sur la section de l’indicateur de crête,

Page 8 - Spécifications

SpécificationsAlimentationConsommation120 Vc.a., 50-60 Hz 31 W max. {25 W en mode enregistrement)wmmmrn^Système vidéo:Système d'enregistrement vi

Comments to this Manuals

No comments

Panasonic VHS Hi-Fi Duplicator AG-6841Hp User Manual

Browse online or download User Manual for Video recorders Panasonic VHS Hi-Fi Duplicator AG-6841Hp. Panasonic VHS Hi-Fi Duplicator AG-6841Hp Manuel d'utilisation

Summary of Contents

Comments to this Manuals

Related products and manuals for Video recorders Panasonic VHS Hi-Fi Duplicator AG-6841Hp