Panasonic WV-CP464 User Manual download pdf (Page 9)

8. Adjust the horizontal phase by pressing or . The adjustable range is 0-2.0 µs.

6-3. Line-lock Sync Mode (LL)

Note: The line-lock (LL) sync mode is not available when the camera operates on DC

power.

1. Move the cursor to the SYNC parameter and select LL.

Note: The settings in this menu can be made only when the multiplexed vertical drive

signal (VD2) is not supplied to the camera.

2. After confirming that the cursor is on

LL, press . The vertical phase

adjustment menu appears on the moni-

tor.

3. Supply the video output signal of the

camera to be adjusted and the refer-

ence camera video output signal to a

dual-trace oscilloscope.

4. Set the oscilloscope to the vertical rate

and expand the vertical sync portion on

the oscilloscope.

5. Move the cursor to COARSE.

6. Press or to match the vertical phase for both video output signals as closely as

possible. (COARSE adjustment can be incremented in 16 steps by 22.5 degrees by

pressing or .)

Note: After the sixteenth step, the adjustment returns to the first step.

7. Move the cursor to FINE.

8. Press or to match the vertical

phase for both video output signals as

closely as possible.

(FINE adjustment can be made up to

22.5 degrees by pressing or .)

Notes:

• When the “I” cursor reaches the “+” end, it jumps back to “–”. At the same time,

COARSE is incremented by one step to enable a continuous adjustment. The

reverse takes place when the “I” cursor reaches the “–” end.

• When or is kept pressed for a second or more, the “I” cursor moves faster.

• To reset COARSE and FINE to the values preset at the factory, press or

simultaneously. COARSE and FINE adjustments are preset at the factory to zero-

crossing of the AC line phase.

• If the AC line contains noise (spike noise, etc.), the stability of the vertical phase of

the camera video output signal may be disturbed.

7. White Balance Setting (WHITE BAL)

7-1. Auto-Tracing White Balance Mode (ATW)

You can select one of two modes for white balance adjustment as follows:

• ATW (Auto Tracing White Balance)

In this mode, the color temperature is monitored continuously and thereby white bal-

ance is set automatically. The color temperature range for the proper white balance is

approximately 2 600 - 6 000K. Proper white balance may not be obtained under the fol-

lowing conditions:

1. The color temperature is out of the 2 600 - 6 000K range.

2. When the scene contains mostly high color temperature objects, such as a blue

sky or sunset.

3. When the scene is dim.

In these cases, select the AWC mode.

Move the cursor to the WHITE BAL parameter and select ATW. The white balance of the

camera is automatically set.

• Automatic White Balance Control Mode (AWC)

In this mode, accurate white balance is obtained within a color temperature range of

approximately 2 300-10 000K.

1. Move the cursor to the WHITE BAL

parameter and select AWC → PUSH

SW.

2. Press to start the white balance

setup. The PUSH SW is highlighted to

indicate that the white balance is being

set.

3. When the white balance setting is com-

pleted, the PUSH SW returns to normal

display.

Note: In case that the white balance is not set, the PUSH SW Is being highlighted.

4. When you want to adjust the white bal-

ance manually, press to select

AWC and press . The AWC menu

appears on the monitor. (When ATW is

selected, pressing displays the

ATW menu.)

Fine Adjustment for AWC (ATW) Manually

You can add the detailed setting for white balance setting manually.

1. To set MASK SET, proceed as described in steps 2 to 4 of “ALC mode with SUPER-D2

OFF and ELC mode”.

2. Move the cursor to R.

3. Press or to obtain the optimum amount of red gain.

4. Move the cursor to B.

5. Press or to obtain the optimum amount of blue gain.

Note: When you need to set MASK SET, re-adjust to obtain the optimum amount of red and

blue gain.

1 (1 - - 16): 0 degrees

2 (1 - - 16): 22.5 degrees

16 (1 - - 16): 337.5 degrees

** SYNC **

V PHASE

COARSE 1(1--16)

FINE I........

- +

RET END

** CAM SET UP **

CAMERA ID OFF

ALC/ELC ALC

SHUTTER OFF

AGC ON

SENS UP OFF

SYNC INT

WHITE BAL AWC

→

PUSH SW

MOTION DET OFF

LENS DRIVE DC

END SET UP ENABLE

↵↵

** AWC **

R ....I....

- +

B ....I....

- +

MASK SET

RET END

↵

1 2 3 4 5 6 7 8 9 10 11

Comments to this Manuals

No comments

Panasonic WV-CP464 User Manual Page 9

Comments to this Manuals

Related products and manuals for Video surveillance systems Panasonic WV-CP464