Panasonic WV-PS15 User Manual download pdf (Page 6)

1. Connect a coaxial cable from a camera to a

CAMERA IN connector of the camera drive

unit. Maximum cable lengths are approxi

mately as shown below.

Coaxial DC R/1000 ft, of Maximum

Cable Type Inner Conductor Cable Length

RG-59/U Less than 30 П 200 m (660 ft.)

RG-6/U Less than 12 Q 500 m (1 650 ft.)

The maximum DC resistance of the cable

between the camera and camera drive unit is

20 Q.

External VD/SYNC Signal

Signal Level

The VD/SYNC IN connector receives the VD or

VS synchronizing signal for external synchroniza

tion.

• VD; 4 V[p-p]/75 n

2. Connect a coaxial cable from a video monitor

to the VIDEO OUT connector of the camera

drive unit. Maximum cable lengths are ap

proximately as shown below.

Composite Sync: 4 V[p-p]/75 Q

Type of

coaxial cable

RG-59/U

(3C-2V)

RG-6/U

(5C-2V)

RG-11/U

(7C-2V)

Recommended

Maximum

(m) 250

500

600

cable length

(ft)

825 1 650 1 980

Note:

If the length of the coaxial cable between

the camera drive unit and the video mon

itor exceeds the distance shown in the

above table, a cable loss compensator

should be used between the camera

drive unit and the video monitor.

3. After connecting the specified camera to the

camera drive unit, connect the audio cable

between the monitor and AUDIO OUT con

nector of the camera drive unit.

• VS; 1 V[p-p]/75 Q

Accuracy of vertical signal

Vertical frequency: 59,940052 Hz ± 0.00161 Hz

Relation between VD/SYNC IN and VD/SYNC

OUT

The signals from the VD/SYNC OUT connector

differ depending on the connected camera and

the signals received at the VD/SYNC IN connec

tor of the camera drive unit.

The signals supplied from VD/SYNC OUT are as

follows:

Signal to

VD/SYNC

IN

ConnectedN.

Camera

No signal

VD signal

Composite

signal

WV-BP50

or

WV-CP110

Composite

signal

VD signal

Composite

signal

1 2 3 4 5 6 7 8 9 10 11 ... 15 16

Comments to this Manuals

No comments