Panasonic SCHTR200EB Operations Instructions Page 31

  • Download
  • Add to my manuals
  • Print
  • Page
    / 36
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 30
RQTV0311
31
AMPLIFIER SECTION
RMS output power of each channel driven
10 % total harmonic distortion
1 kHz Front CH 40 W per channel (4 Ω)
1 kHz Center CH 40 W per channel (4 Ω)
100 Hz Subwoofer CH 100 W per channel (6 Ω)
Total RMS output power 220 W
Total harmonic distortion
half power at 1 kHz (Front CH) 0.5 % (4 Ω)
Input sensitivity
BD/DVD, TV, AUX 1, AUX 2 450 mV, IHF’66
S/N at rated power (4 )
BD/DVD, TV, AUX 1, AUX 2 80 dB
Input impedance
BD/DVD, TV, AUX 1, AUX 2 47 k
Tone controls
BASS 50 Hz, +6 dB to -6 dB
TREBLE 20 kHz, +6 dB to -6 dB
GENERAL
Power supply AC 230V to 240 V, 50 Hz
Power consumption
Main set 68 W
Standby (HDMI ON) 0.8 W
Standby (HDMI OFF) 0.4 W
(After display, the unit turns off.)
Check that the speaker wires are not shorted (bare wires touching each
other) or that you are not using the unit in a hot environment without
proper ventilation.
Curtains or other objects may be blocking the cooling fan. Turn on again
after solving the problem. If the problem still occurs, unplug AC mains
lead and consult your dealer.
Turn off the unit, unplug the AC mains lead, and consult your dealer.
Switch the attenuator on.
28
Display
Check point/Cause/Countermeasure
Pages
You cannot use Dolby Virtual Speaker and SFC effect with PCM signals
with sampling frequency over 48 kHz.
You are trying to use an effect unavailable with the current input source.
22, 23
21
(Scrolling)
(Scrolling)
(“DSP ” or “HDMI” is displayed in
place of .)
Error messages
Specifications
Maintenance
To clean this unit, wipe with a soft, dry cloth.
Never use alcohol, paint thinner or benzine to clean this unit.
Before using chemically treated cloth, carefully read the instructions that came with it.
If the surfaces are dirty
Reference
Error messages/Specifications/Maintenance
Digital input
Optical 2
Coaxial 1
HDMI Input 1
HDMI Output 1
RACK SYSTEM
INCLUDING SPEAKER
Dimensions (W x H x D)
1080 mm x 400 mm x 458 mm
Weight approx. 42.1 kg
Weight includes amplifier and speakers
Weight capacity for Television 80 kg
SPEAKER SYSTEM
Left CH/Center CH/Right CH
6.5cm x 3 Hybrid 2-Way Cone Type Speaker
SUBWOOFER 13 cm x 2 Dual Drive Subwoofer
1. Specifications are subject to change without
notice.
2. Total harmonic distortion is measured by the
digital spectrum analyser.
Dowel position Upper Middle Lower
Compartment
H
Upper
shelf
98 128 158
Lower
shelf
103 73 43
W 730
D 400
Note
UNIT: mm
SC-HTR200 (RQTV0311-2B)_En_GMK_with ferrite core.indd 31 2/14/2008 11:57:06 AM
Page view 30
1 2 ... 26 27 28 29 30 31 32 33 34 35 36

Comments to this Manuals

No comments