Panasonic SAXR30 User Manual download pdf (Page 8)

RQT7512

Step 3

Settings

Change the settings to suit your equipment to the environment in which you are using it. Before making any changes,

read the descriptions of the settings, note the factory settings and ranges, and refer to the equipment’s instructions.

Setup

Enter the setup

mode.

Press and hold at the

same time

(Setup menus and factory

settings á page 21)

SPEAKERS 1. Select.

Set the size to suit your speakers.

LARGE: For speakers that can reproduce a full sound range,

particularly the bass range below 100 Hz.

SMALL: For speakers that cannot adequately reproduce the

bass range. This setting is sufficient for most speakers if

you are using a subwoofer.

NONE: For speakers you haven’t connected (center or

surround).

For the subwoofer (SUB-WFR), select YES if you have

connected one, or NO if you have not.

DISTANCE 1. Select.

Enter the distance of the front, center and surround speakers

from the seating position.

By setting the distance between the speaker’s position (except

the subwoofer) and the listener’s seating position, the sound

delay time is automatically adjusted so that sound reaches the

listener at the same time.

You can select distances between

3 and 30 feet at one-foot intervals.

Change the

settings.

FILTER 1. Select.

Change the cut-off for bass output from the front speakers.

If you set the front speakers to “SMALL”, the filter is set to

100 Hz. Raise the cut-off if the bass from the front speakers is

unsatisfactory so that this bass is output through the subwoofer.

You can raise the cut-off from 100 Hz to either 150 Hz or 200 Hz.

D-INPUT (Digital input) 1. Select.

Change these settings to suit the connections you have made to

the optical (OPT) and coaxial (COAX) digital input terminals, so

that the correct source is selected when you turn [INPUT

SELECTOR].

To finish settings IN MODE (Input mode) 1. Select.

Press and hold at the

same time

This unit automatically detects whether input is digital or analog,

but you can fix the input mode.

AUTO: Automatically detects the input signal and plays

ANALOG: Fixes the input signal to analog and plays

DIGITAL: Fixes the input signal to digital and plays

PCM FIX: Fixes the input signal to PCM and plays

SPEAKERS

PHONES

INPUT SELECTOR

VOLUM E

DOWN UP

HELP

RESET

POWER

Display

INPUT SELECTOR

SPEAKERS

HELP

RESET

POWER

Switch on.

SPEAKERS

HELP

RESET

SETUP

SPEAKERS

HELP

RESET

SPEAKERS

HELP

RESET

DISTANCE

SPEAKERS

HELP

RESET

FILTER

SPEAKERS

HELP

RESET

INPUT

SPEAKERS

HELP

RESET

COMPLETE

SPEAKERS

HELP

RESET

IN MODE

Step 3

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 21 22

Comments to this Manuals

No comments

Panasonic SAXR30 User Manual Page 8

Comments to this Manuals

Related products and manuals for AV receivers Panasonic SAXR30