Panasonic ERSB60 Operations Instructions download pdf (Page 9)

English

Preparation

Charging

• Turn the appliance off.

• Wipe off any water droplets on the appliance socket and the

charging stand.

Connect the appliance plug to the



Plug in the adaptor into a

household outlet�

• Check that the charge status lamp ( )

glows.

• Charging is completed after approx. 1 hour.

Disconnect the adaptor after charging is completed�

While charging After charging is completed

The charge status lamp ( )

glows.

The battery capacity lamp will

blink in order of “LOW”, “MID”,

and “HIGH” while the charging

progresses.

The battery capacity lamp and

the charge

status

lamp ( )

will light up and then turn off

after 5 seconds.

Notes

• If there is noise from the radio or other sources while using or

charging the appliance, move to a different location to use the

appliance.

• The battery will deteriorate if not used for over 6 months, so

make sure to perform a full charge at least once every 6 months.

• The charging time may differ when using the appliance for the



lamp on the appliance may not glow for several minutes when



• Recommended ambient temperature for charging is

10 °C – 35 °C. It may take longer to charge, or the charge status

lamp (

) will blink quickly and the battery may fail to charge

properly in extremely high or low temperatures.

• When the charge status lamp ( ) is blinking rapidly (twice every

second), there is a charging malfunction. Please charge the

battery in the recommended ambient temperature range.

• 1 full charge will provide approximately 60 minutes of continuous

operation. (Based on dry using at 20 °C – 30 °C)

The operating time may differ depending on the frequency of use

and the operating method.

• The battery used is a lithium‑ion, so charging after every use will

have no effect on battery life.

Charging with the charging stand

1. Insert the appliance plug into the charging

stand.

Place the main body on the charging stand.

Plug in the adaptor into a household outlet.

ER-SB60_ME.indb 9 7/19/2017 9:35:14 AM

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 47 48

Comments to this Manuals

No comments

Panasonic ERSB60 Operations Instructions Page 9

Comments to this Manuals