Panasonic DMC-FX77 Operations Instructions download pdf (Page 131)

- 131 -

Connecting to other equipment

Printing the Pictures

If you connect the camera to a printer supporting PictBridge, you can select the pictures to

be printed out and instruct that printing be started from the camera’s LCD monitor.

•

Some printers can print directly from the card removed from the camera. For details, refer to

the operating instructions of your printer.

Preparations:

Turn on the camera and the printer.

Remove the card before printing the pictures from the built-in memory.

Perform the print quality and other settings at the printer before printing the pictures.

A USB connection cable (supplied)

• Check the directions of the connectors, and plug them straight in or unplug them straight out.

(Otherwise the connectors may be bent out of shape which may cause malfunction.)

B Align the marks, and insert.

• Use a battery with sufficient battery power or the AC adaptor (optional) and DC coupler

(optional). If the remaining battery power becomes low while the camera and the printer are

connected, the alarm beeps. If this happens during printing, stop printing at once. If not printing,

disconnect the USB connection cable.

Connect the camera to a printer via the USB connection cable A

(supplied).

Note

•

Do not use any other USB connection cables except the supplied one.

Use of cables other than the supplied USB connection cable may cause malfunction.

• Before connecting or disconnecting the AC adaptor (optional), turn the camera off.

• Before inserting or removing a card, turn the camera off, and disconnect the USB connection

cable.

• Motion pictures cannot be printed out.

Touch [PictBridge(PTP)].

• When the camera is connected to the printer, the cable disconnect prohibit icon [å]

appears. Do not disconnect the USB cable while [å] is displayed.

1 2 ... 126 127 128 129 130 131 132 133 134 135 136 ... 154 155

No comments

Panasonic DMC-FX77 Operations Instructions Page 131