- 75 -
Recording
Applicable modes:
Taking Pictures with the Self-Timer
Note
•
When you press the shutter button once fully, the subject is automatically focused just before
recording. In dark places, the Self-timer indicator will blink and then may turn on brightly
operating as an AF Assist Lamp to allow the camera to focus on the subject.
• We recommend using a tripod when recording with the Self-timer.
• Depending on the recording conditions, the recording interval may become more than
2 seconds when [10S / 3PICTURES] is selected.
• It is not possible to set [10S / 3PICTURES] in the following cases.
– In Intelligent Auto Mode
– When using Auto Bracket
– When using White Balance Bracket
– In [PANORAMA ASSIST], [FLASH BURST] and [PHOTO FRAME] in Scene Mode
– During the Burst Mode
• Setting of the self-timer cannot be performed in following conditions.
– In [3D PHOTO MODE] in Scene Mode
– When recording motion pictures
Press 2 [ë].
Press 3/4 to select the item and then
press [MENU/SET].
Item Description of settings
[OFF] —
[2SEC.]
Picture is taken 2 seconds after shutter is pressed.
•
When using a tripod etc., this setting is a convenient way to
avoid the jitter caused by pressing the shutter button.
[10SEC.]
Picture is taken 10 seconds after shutter is pressed.
[10S / 3PICTURES]
After 10 seconds the camera takes 3 pictures at about
2 second intervals after shutter is pressed.
Press the shutter button halfway to focus
and then press it fully to take the picture.
• The Self-timer indicator A blinks and the shutter is
activated after 10 seconds (or 2 seconds).
• When [10S / 3PICTURES] is selected, the Self-timer
indicator blinks again after the first and the second
pictures are taken and the shutter is activated
2 seconds after it blinks.
Comments to this Manuals