Panasonic DMC-FZ200 Operations Instructions download pdf (Page 199)

- 199 -

Others

The AC adaptor (optional) can only be used with the designated Panasonic DC coupler

(optional). The AC adaptor (optional) cannot be used by itself.

Preparations:

Turn this unit off and confirm that the lens barrel is retracted.

A Card/battery door

B DC coupler

C DC coupler cover

D AC adaptor

E AC cable

1 Pull open the card/battery door and the DC coupler

cover.

2 Insert the DC coupler into this unit.

•

Insert by pushing the centre of the DC coupler.

• Press on the DC coupler until it is locked by lever 1.

3 Pull out the cable through the opening as shown in

the illustration and then close the card/battery door.

•

Be careful not to catch the cable when closing the card/

battery door.

4 Plug the AC adaptor into an electrical outlet.

5 Connect the AC adaptor to the [DC IN] socket of the DC coupler.

Note

• Always use a genuine Panasonic AC adaptor (optional).

• When using an AC adaptor, use the AC cable supplied with the AC adaptor.

• If the AC adaptor and DC coupler are not necessary, then remove them from the digital camera.

Also, please keep the DC coupler cover closed.

• Also read the operating instructions for the AC adaptor and DC coupler.

AC adaptor (optional)/DC coupler (optional)

1 2 ... 194 195 196 197 198 199 200 201 202 203 204 ... 219 220

No comments

Panasonic DMC-FZ200 Operations Instructions Page 199