Panasonic DMC-LZ3S Operations Instructions download pdf (Page 93)

Others

93

VQT0U87

– Replace them with batteries which

have sufficient capacity. (When you

use Ni-MH batteries, charge them.)

– If you leave the camera on, the

batteries will be exhausted. Turn the

camera off frequently by using power

save mode (P22), economy mode

(P22), etc.

∫ Recording

1: The picture cannot be recorded.

• Is the mode dial correctly set?

• Is there any memory remaining on the

built-in memory or the card?

– Before recording, delete some

pictures. (P34)

2: The recorded picture is whitish.

The lens is dirty.

• The picture can become whitish if there

is dirt e.g. fingerprints on the lens. If the

lens is dirty, turn on the camera, eject

the lens barrel (P10) and gently wipe

the lens surface with a soft dry cloth.

3: The recorded picture is too bright or

dark.

• Check that the exposure is correctly

compensated. (P43)

4: The subject is not focused properly.

• The focus range varies depending on

the recording mode.

Rotate the mode dial to set the proper

mode for the distance to the subject.

• Is the subject beyond the focus range of

the camera? (P25)

• Have you taken a picture with jitter?

5: The recorded picture is blurred. The

optical image stabilizer is not

effective.

• The shutter speed will become slower

and the optical image stabilizer function

may not work properly when taking

pictures especially in dark places. In

this case, we recommend holding the

camera firmly with both hands when

taking pictures. (P25) When

[SLOW SHUTTER] (P67) is set, we

recommend using a tripod and the

self-timer (P42) when taking pictures.

6: The recorded picture looks rough.

Noise appears on the picture.

• Is the ISO sensitivity high or the shutter

speed slow?

(ISO sensitivity is set to [AUTO] when

the camera is shipped. Therefore, when

taking pictures indoors etc. the ISO

sensitivity increases.)

– Decrease the ISO sensitivity. (P63)

– Set [PICT.ADJ.] to [NATURAL]. (P68)

– Take pictures in bright places.

• In [HIGH SENS.] (P55) in scene mode,

the resolution of the recorded picture

decreases slightly because of high

sensitivity processing.

This is not a malfunction.

7: Motion picture recording stops in the

middle.

• Are you using a MultiMediaCard?

– This unit does not support

MultiMediaCards.

• We recommend using a high speed SD

Memory Card with “10MB/s” or greater

displayed on the package when you set

the picture quality to [30fpsVGA].

• Depending on the type of SD Memory

Card, recording may stop in the middle.

∫ LCD monitor

1: The LCD monitor is turned off

sometimes when the camera is turned

on.

• Is the LCD monitor turned off soon after

you take pictures with the flash?

– While the flash is being charged, the

LCD monitor is turned off.

2: The LCD monitor becomes darker or

brighter for a moment.

• This phenomenon appears when you

press the shutter button halfway to set

the aperture value and does not affect

the recorded pictures.

VQT0U87ENG.book 93 ページ２００５年１２月２７日　火曜日　午後７時１２分

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 111 112

Comments to this Manuals

No comments