45
Screen displays
Camera mode and VCR mode
1Counter display
Each time the COUNTER button is pressed,
the data is selected in the sequence given
below.
COUNTER:
Counter value
M COUNTER:
Counter value in the memory stop mode
TC:
Time code value
“TC2” is displayed when the time code
value could not be read out properly from
the tape.
When a tape recorded in the non-drop
frame mode is played back, a colon (:)
appears between the seconds and frames.
UB:
User’s bit value
“UB
2” is displayed when the user’s bit
value could not be read out properly from
the tape.
2AWB/ABB operation status display
The operation statuses of the auto white
balance and auto black balance are displayed
here.
3AWB error display
LOW LIGHT:
This appears when the luminance is too
low during the auto white balance
adjustment.
4Recording time mode display (SP or LP)
5Setting selection display
The selected setting appears here when a
switch has been selected or a button has
been pressed to select a setting.
6Auto iris control status display
STD : Standard auto iris control
SPOT : Auto iris control for spotlight
BACK : Auto iris control for backlight
compensation
7Shutter speed display
8Audio level meter display
9Audio sampling frequency display
:Scene filename display
;Warning information displays
REMOTE:
This flashes when the component for which
the wireless remote control unit is set is the
wrong one.
:
This lights when condensation has formed
inside the camera recorder.
:
This flashes when the cylinder head is
dirty.
:
This flashes when the cassette tape has
not been inserted or when it has been set
to the recording inhibit mode.
:
This lights if a problem occurs in the
camera recorder when face-to-face
shooting is performed in the mirror mode.
:
This lights when the internal battery used
for the calendar has run down.
Comments to this Manuals