AK-HC1500GULTI FORMATDIGITAL CAMERA SYSTEMMulti Purpose CameraAK-HC1500GBefore attempting to connect, operate or adjust this product, please read
- 9 (E) -Major operating controls and their functions Lens mount2/3” standard bayonet type (B4 mount) lens is installed. Lens fixing ring knobLens i
- 10 (E) -ENGLISH HD SDI output connector [HD SDI OUT]SDI signal output is given by this line. G/L input connector [G/L IN]For gen-lock with the cam
- 11 (E) - Tally output connector [TALLY OUT]The R tally and G tally signals are output from this connector.These signals take effect when the option
- 12 (E) -ENGLISHHow to installBe sure to ask the dealer for the installation, adjustment and connection of this equipment.How to set the lens Stan
- 13 (E) -How to set up the systemConfiguration example 1: Connection of camera controller Use multi cable supplied with AK-HRP150G for the connec
- 14 (E) -ENGLISHHow to set up the systemConfiguration example 2: High-Speed P/T systemCable kitAW-CAK4HIGLensMulti purpose cameraAK-HC1500GMonitorIR
- 15 (E) -Operation procedure1 Turn on the power of each equipment.2 Properly adjust the light for the object.3 Adjust the flange back of the lens, th
- 16 (E) -ENGLISHHow to adjustFlange back adjustment (for zoom lens)The adjustment is to adjust the focus in all the range from the maximum zoom to t
- 17 (E) -How to adjustWhite balance adjustmentAdjust the white balance after shooting a white object by at least 50% of the screen.NOTE: If the whi
- 18 (E) -ENGLISHBlack balance adjustment Adjust it with the lens closed. When the motor drive lens is controlled from the camera, adjusting the
indicates safety information.CAUTIONRISK OF ELECTRIC SHOCK DO NOT OPENCAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).NO
- 19 (E) -Setting of menu itemsHow to display the menusTwo methods are used to display the menus. Using AK-HC1500G multi purpose camera to display
- 20 (E) -ENGLISHSetting of menu itemsDETECTION [READY, ACTIVE]For automatically correcting the black shading. CORRECT(DIG) [OFF, ON]For ON/OFF contro
- 21 (E) -Setting of menu items MAINTENANCE menu PEDESTAL,GAMMA(1/2) M PEDESTAL :+000 R PEDESTAL :+000 B PEDESTAL
- 22 (E) -ENGLISHSetting of menu itemsB BLACK GAMMA [–15 to +15]For adjusting the gamma characteristics of the blue in the vicinity of the black in re
- 23 (E) -Setting of menu itemsR FLARE [000 to 100]G FLARE [000 to 100]B FLARE [000 to 100]For adjusting the flare correction.FLARE [OFF, ON]For turni
- 24 (E) -ENGLISHSetting of menu items �� KNEE,WHITE CLIP(1/2) �� M KNEE POINT :95.00% R KNEE POINT :+00.00% B KNEE POINT :+00.00% M
- 25 (E) -Setting of menu itemsA. KNEE POINT [80.00% to 107.00%]For setting the auto knee break point position.This setting does not take effect when
- 26 (E) -ENGLISH �� KNEE,WHITE CLIP(2/2) �� KNEE :MANUAL WHITE CLIP :ON HIGH COLOR :OFFSetting of menu items MAINTENANC
- 27 (E) -Setting of menu items �� DETAIL(1/2) �� DETAIL :ON TOTAL DTL LEVEL :+00 H DTL LEVEL :11 CRISP :02 LEVEL DE
- 28 (E) -ENGLISHSetting of menu itemsSLIM DETAIL [OFF, ON]For setting the detail more finely at ON.DETAIL(+) [–31 to +31]For adjusting the detail gai
- 2 (E) -ENGLISH indicates safety information.CAUTION:TO REDUCE THE RISK OF FIRE OR SHOCK HAZARD AND ANNOYING INTERFERENCE, USE THE RECOMMEND
- 29 (E) -Setting of menu items MAINTENANCE menu �� SKIN TONE DETAIL �� SKIN TONE DTL :OFF SKIN GET :OFF SKIN DTL CORING :5 Y MAX
- 30 (E) -ENGLISHSetting of menu items MAINTENANCE menu[8] GAIN, AUTO IRIS �� GAIN,AUTO IRIS �� LOW GAIN :0dB MID GAIN :9dB HIGH
- 31 (E) -Setting of menu items MAINTENANCE menu �� S.GAIN(1/2) �� S.GAIN1 MODE :S.GAIN1 �TOTAL GAIN :42dB GAIN :3
- 32 (E) -ENGLISHSetting of menu items MAINTENANCE menu[9] SUPER GAINLEVEL DEPENDENT [0 to 15]For removing the detail in the dark areas. The higher
- 33 (E) -Setting of menu items MAINTENANCE menu �� FRAME MODE �� SCAN REVERSE :OFF FRAME RATE RANGE :60-6 FRAME RATE :60SCAN REVERS
- 34 (E) -ENGLISHSetting of menu items MAINTENANCE menu �� MATRIX �� MATRIX TABLE :A MATRIX R-G :+00 MATRIX R-B :+00 MATRIX G
- 35 (E) -Setting of menu items �� COLOR CORRECTION(1/2) �� SAT PHASE R +00 +00 Mg +00 +00 B +0
- 36 (E) -ENGLISHSetting of menu items SETTING menu � SETTING � 1.MODE 2.SHUTTER 3.GEN-LOCK 4.PIX DEFECT 5.PROTOCOL MODE(1/2) D560
- 37 (E) -Setting of menu itemsCAM ID POSI [0 to 3]For selecting where the camera ID is to be displayed.0: top left, 1: top right, 2: bottom left, 3:
- 38 (E) -ENGLISHSetting of menu itemsFORMAT[720/60p, 59.94p, 50p, 1080/60i, 59.94i, 50i, 1080/30p, 29.97p, 25p, 24p, 23.98p]For selecting the video o
- 3 (E) - 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this appar
- 39 (E) -ABB OK: When the automatic black balance has been adjusted satisfactorily.OUT RANGE RGB: When the automatic black balance has not been
- 40 (E) -ENGLISHSetting of menu items SETTING menu SHUTTER SHUTTER MODE :OFF SHUTTER SPEED :1/100 SYNCHRO SCAN :60.32HzSHU
- 41 (E) -Setting of menu items GEN-LOCK GEN-LOCK INPUT :BNC H PHASE-COARSE :+00 H PHASE-FINE :+000 SD HD PHASE CRS :+0 SD
- 42 (E) -ENGLISHSetting of menu items PROTOCOL PROTOCOL :1 SETTING menuPROTOCOL [1 to 4]For selecting the remote control communic
- 43 (E) -Setting of menu items CAMERA ID menu CAMERA ID ID:AK-HC1500An ID of not more than 10 characters consisting of alphanumerics, symbol
- 4 (E) -ENGLISHInformation on Disposal for Users of Waste Electrical & Electronic Equipment (private households)This symbol on the products and/o
- 5 (E) -ContentsAccessoriesAccessories ... 5Introduction ... 6Chara
- 6 (E) -ENGLISHIntroductionCharacteristicsNew 2/3˝ 1 million-pixel CCD is employed. [1280(H)720(V)] 1 million-pixel CCD is 2/3˝ in size, being com
- 7 (E) - Do not attempt to disassemble the camera or other units. In order to prevent electric shock, do not remove screws or covers. There are no
- 8 (E) -ENGLISHMajor operating controls and their functions Front view Top viewBottom view Rear view
Comments to this Manuals