Panasonic DMC-LC43A User Manual Page 79

  • Download
  • Add to my manuals
  • Print
  • Page
    / 96
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 78
Technical use
Playing Back Images with a TV Monitor
By connecting the camera to a television via the supplied AA/ cable ©, it is possible
to view and play back the recorded images.
[Preparation]
Turn the camera and the television off.
1 Connect the A/V cable 0 to the AA/ OUT socket of the camera.
2 Connect the AA/ cable to the video in and the audio In sockets of the TV.
Yellow; to the video in socket
White: to the audio in socket
3 Turn the television on and select external input.
4 Turn the camera on and then set the mode dial to playback [@].
The image is displayed on the television.
■ Viewing images in other countries
When setting [VIDEO OUT] on the menu, you can view images on the TV in other
countries (regions) which use the NTSC or PAL system.
Even if you set menu selection for [VIDEO OUT] to [PAL], the output signal is still
NTSC.
When connecting to a TV, use the batteries which the remaining power is enough
or AC adaptor (optional, DMW-AC2).
Do not use any other cables except the supplied one.
The A/V cable cannot be connected to the “antenna" connection of your television.
Your TV must provide separate audio and video connections for this feature to
operate correctly.
Read the TV operating instructions too.
Page view 78
1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 95 96

Comments to this Manuals

No comments