Panasonic CQCB8901U User Manual Page 27

  • Download
  • Add to my manuals
  • Print
  • Page
    / 27
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 26
55
CQ-CB8901U
Specifications
Installation, Specifications
Notes:
¡Specifications and design are subject to modification without notice due to improvements.
¡Some figures and illustrations in this manual may be different from your product.
General
Sampling Frequency 8 times oversampling
DA Converter 4 DAC System
Pick-Up Type Astigma 3-beam
Light Source Semiconductor laser
Wavelength 790 nm
Frequency Response 20 Hz - 20 kHz (±1 dB)
Signal to Noise Ratio 96 dB
Total Harmonic Distortion
0.01 % (1 kHz)
Wow and Flutter Below measurable limits
Channel Separation 86 dB
FM FM (HD Radio)
Frequency Range 87.9 MHz - 107.9 MHz Frequency Range 87.9 MHz - 107.9 MHz
Usable Sensitivity 12.2 dBf. (1.12 µV, 75) Usable Sensitivity
88 dBm (BER<1.0X10
-5
)
50 dB quieting Sensitivity
15.2 dBf. (1.59 µV, 75) Signal to noise ratio 79 dB
Frequency Response 30 Hz - 15 kHz (
±3 dB)
Stereo Separation 76 dB
Alternate channel selectivity
75 dB Total harmonic distortion 0.08 % (1 kHz)
Stereo Separation 40 dB (at 1 kHz)
Image response ratio 75 dB
IF response ratio 100 dB
Signal to noise ratio 62 dB
AM AM (HD Radio)
Frequency Range 530 kHz - 1 710 kHz Frequency Range 530 kHz - 1 710 kHz
Usable Sensitivity 25 dB/µV (S/N 20 dB) Usable Sensitivity
21 dB/µV (BER<1.0X10
-5
)
Signal to noise ratio 77 dB
Stereo Separation 74 dB
Total harmonic distortion 0.08 % (1 kHz)
CD PlayerRadio
Power Supply DC 12 V (11 V - 16 V), Test Voltage 14.4 V, Negative Ground
Tone Controls (Bass/Treble)
Bass; ±12 dB at 62 Hz, Treble; ±12 dB at 16 kHz
Equalizer Center Frequency
60, 160, 400, 1 k, 3 k, 6 k, 16 k (Hz)
Variable Range of Equalizer
-
12 dB to 12 dB (2 dB step)
Current Consumption Less than 2.2 A (CD mode, 0.5 W 4-Speaker)
Maximum Power Output
50 W x 4 (at 1 kHz)
Speaker Impedance 4 - 8
Pre-amp output voltage
5 V
Subwoofer-output voltage
5 V
Pre-amp output impedance
60
Subwoofer-output impedance
60
Dimensions (Main Unit)
178(W) x 50(H) x 155(D) mm {7x 1
15
/
16
x 6
1
/
8
}
Weight (Main Unit) 1.7 kg {3 lbs. 12 oz}
Above Specifications comply with EIA standards.
Power Output:
18 W RMS x 4 Channels at 4 and 1%
THD+N
Signal to Noise Ratio:
78 dBA (reference: 1 W into 4 )
54
Installation
CQ-CB8901U
q
Remove the face plate.
Cautions:
¡Do not touch the contacts on the face plate or on the main unit, since this may result in poor electrical
contacts.
¡If dirt or other foreign substances get on the contacts, wipe them off with clean and dry cloth.
w
Remove the trim plate.
e
Lock release
q Insert the lock cancel plate until you hear a
click.
w Pull the main unit.
r
Pull out the unit with both hands.
Insert the tab
end in the
outer groove.
“Click”
To Remove the Unit
e
w
q
q
w
q
w
Page view 26
1 2 ... 22 23 24 25 26 27

Comments to this Manuals

No comments